Symphony w25 / ktouch w650 / mobistar s01 / karbonn a7 ICS Upgrade tutorial.

rainwalker · Jan 5, 2013

Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.

Full tutorial is also available on my blog : iamrainwalker

Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.

Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:

Updating Baseband
Flashing AP(Factory) ROM
Flashing Finalized NANDROID ROM.

YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.

ICS_Stable_sw25_rom Featurs :

Fully Rooted
Updated SU and Busybox binaries
Init.d Support, busybox runpart
App2SD enabled
Super Fast
All Sensors working
Better Battery Life
Better Network Reception
ALL new Jelly Bean keyboard
Cracked PowerAmp Music Player
Added
And many other tweaks I can’t remember right now.

* Points to be noted

You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.
You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card
System is already configured for Bangladeshi Users.

Download all Files Listed below :

AP_BP_FOR_ICS_S01

o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi

o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr

ASDK_Files

o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f

o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9

Drivers

o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1

S01_Flash_tools

o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7

Symphony_ICS_stable_1

o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4

o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc

CWM for S01

o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7

7zip

o http://www.7-zip.org/

File Extraction :

Download all files in a folder like this location “F:\sym_ics\SYMICS4\”
Select files like this photo and Use 7zip to Extract.
Make use you have folders Extracted like this

Updating Baseband :

This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.

*It is not mandatory to install Android SDK and Java Runtime.

Install “jdk-7-windows-i586.exe”
Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.
After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.
Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here
Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.
Switch off your phone, remove battery, SIM cards, SD card.
Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.
Now, Connect your phone to your pc.
You will see a popup like this, cancel it.
Go to your device manager and follow the procedure below :

For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :
In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :
Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.

AP Upload :

Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.
Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”
Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :
Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.

Flashing Finalized Stable NANDROID ROM :

Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.

Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.

Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.

Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.

Helpful Links :

Driver Installation Video : https://vimeo.com/55837968

Another Baseband Update Guide : http://xdaforums.com/showthread.php?t=2036053

XDA foram Thread : http://xdaforums.com/showthread.php?t=1788936

Rooting Symphony w25 : http://xdaforums.com/showthread.php?t=1818146

Thanks From the deepest corner of my heart to :

prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement

rjunraj · Jan 6, 2013

rainwalker said:
Always remember to BACKUP your SYSTEMs NANDROID BACKUP with CWM. * I am really not responsible for any damage to your phone; it’s all upon your responsibility. *Let me know if any edit is recommended by you.

Full tutorial is also available on my blog : iamrainwalker

Ahh! I love my ICS rom and my symphony w25. I am a perfectionist, so I took my time to study and gone throw lots of trials and errors to finalize the ICS rom. Thanks to all those Brilliant senior developers from XDA for their numerous helps and tips. I will start by providing some screenshot of the ICS rom.

Beautiful isn’t it? Now let’s start. Just make sure you read and follow everything I say from now. Upgrading process is divided in 3 steps actually:

Updating Baseband

Flashing AP(Factory) ROM

Flashing Finalized NANDROID ROM.

YOU MUST FOLLOW ALL STEPS ONE BY ONE, DO NOT DO ANYTHING YOU DON’T KNOW, IF YOU ARE A TOTAL NEWBIE, THIS IS NOT FOR YOU KIDDO. DON’T BLAIM ME FOR YOUR MISTAKES.

ICS_Stable_sw25_rom Featurs :

Fully Rooted

Updated SU and Busybox binaries

Init.d Support, busybox runpart

App2SD enabled

Super Fast

All Sensors working

Better Battery Life

Better Network Reception

ALL new Jelly Bean keyboard

Cracked PowerAmp Music Player

Added

And many other tweaks I can’t remember right now.

* Points to be noted

You need to enable or disable Gsensor from Settings > Display by your self, Status ber shortcut don’t work.

You need to set APN manually from Settings > More > Mobile Networks > Select Subscription > Manage Card

System is already configured for Bangladeshi Users.

Download all Files Listed below :

AP_BP_FOR_ICS_S01

o (AP+BP)_ICS_S01.7z.001 – http://www.mediafire.com/?5v5qkcd4viag8vi

o (AP+BP)_ICS_S01.7z.002 – http://www.mediafire.com/?mahtazx3jrbprtr

ASDK_Files

o installer_r20.0.3-windows.exe – http://www.mediafire.com/?p57ix4v80c3yf8f

o jdk-7-windows-i586.exe – http://www.mediafire.com/?rejrjk6rjjbq5d9

Drivers

o S01_Drivers.7z – http://www.mediafire.com/?wjhalczqtg7k1c1

S01_Flash_tools

o S01_flash_tools.7z – http://www.mediafire.com/?6mzx0bqrd6oubo7

Symphony_ICS_stable_1

o clockworkmod_rainwalker.7z.001 – http://www.mediafire.com/?uzw25cq5bk1omn4

o clockworkmod_rainwalker.7z.002 – http://www.mediafire.com/?242vkhkfi3noekc

CWM for S01

o CWM-English.rar – http://www.mediafire.com/?y0e31h55qurp3y7

7zip

o http://www.7-zip.org/

File Extraction :

Download all files in a folder like this location “F:\sym_ics\SYMICS4\”

Select files like this photo and Use 7zip to Extract.

Make use you have folders Extracted like this

Updating Baseband :

This process is pretty nasty. I made a successful Update after trying a number of times and fails, after that I installed WINDOWS XP SP3 and successfully Updated Baseband. So I would recommend you guys to Start this Upgrading Process with a Freshly Installed Windows XP. I will try to give you as much as possible visual guide.

*It is not mandatory to install Android SDK and Java Runtime.

Install “jdk-7-windows-i586.exe”

Install “installer_r20.0.3-windows.exe” , make sure you have selected options red marked in this photo when Android SDK download files.

After download complete, Go to “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01” This folder.

Extract “NPRG7627A.zip” by right clicking it 7-zip > Extract Here

Copy “NPRG7627A.hex” to “591357_8376_WCDMA_V0005” folder.

Switch off your phone, remove battery, SIM cards, SD card.

Place battery on your phone, Hold POWER BUTTON+VOLUME DOWN BUTTON together, you will see “QPST Entry Download”.

Now, Connect your phone to your pc.

You will see a popup like this, cancel it.

Go to your device manager and follow the procedure below :

For you the driver location will be “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\HK11-VB717-27\HK11-VB717-27_1.0.56\Win32\x86\free”, Click Ok, and press Next. Driver will be installed. Close it. Go to device manager and you will see something like this :

In my case i got COM3, you may have diffrent port number. Now go to “F:\sym_ics\SYMICS4\S01_flash_tools\fast_boot” and Open “fastboot1.0.2.4.exe”. You will see something like this :

Click on “BP Browse” select folder “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\591357_8376_WCDMA_V0005″, Put the port number on “BP Port”, take a deep breath and press Download, download should start if everthing is allright, after download compleate “fastboot1.0.2.4.exe” will close by itself. and you need to pull your phone bettery to shut it down and disconnect the phone form your pc.

AP Upload :

Place your phone battery on the phone, press POWER BUTTON + VOLUME UP and wait untill you see a GREEN display on your phone.

Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb_driver” for drivers.

After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”

Click on “SEL PATH” button and select “F:\sym_ics\SYMICS4\(AP+BP)_ICS_S01\(AP+BP)_ICS_S01\ICS_S01\TBW591357_9999_V0001_2″ folder click ok. you will see :

Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.

Flashing Finalized Stable NANDROID ROM :

Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.

Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7

Copy it to “F:\sym_ics\SYMICS4\”

Extract using 7-zip > Extract Here.

Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.

Connect your phone with the pc.

Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)

You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)

Wait sometime, CWM recovery should boot.

Now, from the menu, Select “wipe data/factory reset”

After finishing slect “wipe cache partition”

After that, go to “mount & Storage” > “Mount Usb Drive”

Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.

Select “Unmount” from your phone. And Select “Go back”

Select “Backup and Restore”

Select “Restore”

Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.

Yah! You are now on ISC stable. Enjoy.

Helpful Links :

Driver Installation Video : https://vimeo.com/55837968

Another Baseband Update Guide : http://xdaforums.com/showthread.php?t=2036053

XDA foram Thread : http://xdaforums.com/showthread.php?t=1788936

Rooting Symphony w25 : http://xdaforums.com/showthread.php?t=1818146

Thanks From the deepest corner of my heart to :

prasad12ka4 , ahmed.zunaid , vinodkbishnoi (for poviding stability of the rom) & all tose person who helped me for this achivement

Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.

Sent from my Spice Mi-355 using xda app-developers app

rainwalker · Jan 6, 2013

rjunraj said:
Thx for your hardwork but plz remove power amp
Its a paid app and adding it into a rom is against forum rules.
You may banned for this if moderator would see.

Sent from my Spice Mi-355 using xda app-developers app

Thank you for letting me know, i will remember this at my next releases

.

raj_onu · Jan 8, 2013

splash.img - change

Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.

rainwalker · Jan 8, 2013

raj_onu said:
Hello Rainwalker, Thank you for this thread, I have updated ICS in my W25. But I want to know, Is there any chance to replace/change "Mobistar" boot splash image. if would please let us know. thanks again for you hard work.

Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.

raj_onu · Jan 8, 2013

rainwalker said:
Yes, it is possible, my new rom will have a new splash image. i will post a procedure about changing spalsh image soon.

Thanks, I will be waiting for that..

sfmteixeira · Jan 8, 2013

I have a big problem in this part:

Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.

something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...

Can you help me please...

Thanks

I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....

rainwalker · Jan 8, 2013

sfmteixeira said:
I have a big problem in this part:

Now press “OK” and wait for first “Waiting Decices…” to compleate and then disconnect the phone, pull your battery and start your phone. ICS should start with creepy forign language.

something go wrong and dont complete the action so the result is now even if a try start from dyhe begin dont work now give error im step to download....and can do anything more...

Can you help me please...

Thanks

I already try to get in bootloader green screen and after red to put a normal rom but broken in red dont go more than that....

It would be great if you can send me a screenshot. i need to know what error exactly occurs? and what os do you use?

sfmteixeira · Jan 8, 2013

Problem starts here

Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”

The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.

After that i try make all again but dont be able to make download and nothing more in the steps you said.

Sorry and thanks for help

rainwalker · Jan 8, 2013

sfmteixeira said:
Problem starts here

Connect you phone and you will see a new Device is found named Android, now install the drivers by following procedure like prevoiusly shown and use the folder “F:\sym_ics\SYMICS4\S01_Drivers\drivers\Driver\adb _driver” for drivers.
After driver instlation compleate, go to “F:\sym_ics\SYMICS4\S01_flash_tools\EMMC_AP” and open “QUALFAST2.0.4(Factory).exe”

The device says is not possible to install before i even put the drivers dont reconice any android device and than in the upload starts ok but in the firt step of getting device give error.

After that i try make all again but dont be able to make download and nothing more in the steps you said.

Sorry and thanks for help

which operating system do you use? did your BP download was successful? try rebooting your computer the get into fastboot mod on your phone, connect your phone to computer, if you don't see anything then go and see in device manager, if you see there are some yellow unrecognized devices then install them.

sfmteixeira · Jan 8, 2013

I use seven! If i enter in fastboot (green) apear unkow device only and i already try the drivers you oput but nothing happen! I have another pc with 8 do you think if a do all steps can result?

---------- Post added at 05:15 AM ---------- Previous post was at 05:08 AM ----------

If a tur on my phone normaly apearce your logo and stay stock....but the pc recognice as Android as Android composite ADB Interface....

sfmteixeira · Jan 8, 2013

Finally i was able in other pc but there is a problem!

This part i cant do it

Flashing Finalized Stable NANDROID ROM :

Default firmware rom do not come with CWM installed as recovery, so we need to port it now. This is a pretty simple procedure.
Download CWM-English.rar from This link : http://www.mediafire.com/?y0e31h55qurp3y7
Copy it to “F:\sym_ics\SYMICS4\”
Extract using 7-zip > Extract Here.

Shutdown your phone, insert your sim and sd card. Press POWER BUTTON + VOLUME UP button till the GREEN display appears.
Connect your phone with the pc.
Open Command prompt and type :cd F:\sym_ics\SYMICS4\CWM-English (press enter)Fastboot devices (press enter)
You should see something like “???????????? fastboot” Now type :fastboot boot recovery-english.img (press enter)
Wait sometime, CWM recovery should boot.
Now, from the menu, Select “wipe data/factory reset”
After finishing slect “wipe cache partition”
After that, go to “mount & Storage” > “Mount Usb Drive”
Now sd card will be mounted on your pc. Copy “F:\sym_ics\SYMICS4\clockworkmod_rainwalker\ clockworkmod” to your sd card.
Select “Unmount” from your phone. And Select “Go back”
Select “Backup and Restore”
Select “Restore”
Select “ICS_W25_Stable” and confirm, wait for restore to complete, then reboot.
Yah! You are now on ISC stable. Enjoy.

How can i do for have root and make the recovery you said to have a stable ICS?

Because im not superuser, i dont have portuguese language and im not able to configure the apn for have internet in the phone!

Sorry again but if you can help!

Thanks a lot

Regards

rainwalker · Jan 8, 2013

you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.

Sent from my Symphony W25

sfmteixeira · Jan 9, 2013

rainwalker said:
you dont need to be a superuser to flah cwm. flash cwm by following the procedure i have wrote. then flash the clockworkmod file. u just need to flash cwm. i have already posted my new update on this rom. see my blogs latest post.

Sent from my Symphony W25

I already try do step by step all you said...but the last i was not able so i do this:

Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!

But i still with same problems:

Only English language dont have portugese

And the CWM recovery i think is with problems:

Because dont have all the things

Apearce like this:

Android system recovery (3e)

rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache

and no more funcions as you show in your images

I think some goes wrong in this part thats why i can put any more rom

Sorry again but please help me

rainwalker · Jan 9, 2013

sfmteixeira said:
I already try do step by step all you said...but the last i was not able so i do this:

Install room manager and make Select “Restore”
Select “ICS_W25_Stable and all ok!

But i still with same problems:

Only English language dont have portugese

And the CWM recovery i think is with problems:

Because dont have all the things

Apearce like this:

Android system recovery (3e)

rebbot system now
apply update from external store
wipe data/factory reset
wipe cache partition
apply update from cache

and no more funcions as you show in your images

I think some goes wrong in this part thats why i can put any more rom

Sorry again but please help me

CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.

sfmteixeira · Jan 9, 2013

rainwalker said:
CWM is Clockworkmod Recovery, it's a recovery replacement of stock recovery. the procedure is told is how to install CWM by replacing Stock recovery, if you have successfully flashed "ICS_W25_Stable" you already should have CWM on your system. try by pressing VOL UP + Power and hold untill Red display showes up. I am sorry i can't help you with Language support. But if you don't install CWM on your system then you wont be able to update new roms.

I do all steps you said all goes ok! Only the step to make download in flash starts and then gives error, but after all steps ok! Bur the recovery stills the same the normal recovery with 5 option i said before!

The only way i put the "ICS_W25_Stable" it was from the rom manager i installed...

I dont understand what is happen...

Pritesh.mohan · Jan 12, 2013

Sd card space running out

hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.

pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx

rainwalker · Jan 13, 2013

Pritesh.mohan said:
hi,
i did everything like you posted.
using the rom since 3-4 days.
i have some issues.
1) internal memory is always low.i do not have anyrhing installed .(21 mb free)
2) when i try to download an app from play store,it says that sd cars apace running out and the download fails.
3) i have link2sd and 1gb ext2 partiotin in sd card. total sd size is 8 gb. 1.2 gb is empty at the moment.

pls give me a solution for this.
i really like the rom.
great battery performance.
if you could help me with the memory issue,then it will be awesome.
thanx

Reset To factory settings, then start using link2sd. internal memory shows low because of preinstalled apps. you can use my 3rd updated rom "OPSHORA". this one is best. i personally use this rom. but you need to follow all procedures step by step. but you don't need to update Baseband again. OPSHORA rom has some Blue screen issue sometime, but removeing your battery will fix it.

raj_onu · Jan 13, 2013

Headphone Sound Problem

Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.

rainwalker · Jan 13, 2013

raj_onu said:
Hi Rainwalker, I have an problem with headphone sound. When I playing a song, normally it's ok but, after plugin headphone, headphone sound is too poor. Please help me out of this issue.

which music application do you use? chk sound settings, and equalizer settings.

Symphony w25 / ktouch w650 / mobistar s01 / karbonn a7 ICS Upgrade tutorial.

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts