[KERNEL][UPDATED 17/01][MM][AOSP/CM][Mi3]FALLEN_SHADOW C2

@War_machine28 · Nov 10, 2015

"FALLEN_SHADOW"

*/
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

KEY-FEATURES(LP/MIUI/KK)

1) Compiled with UBERTC 6.0
2) USB Fast Charge
3) Alucard Hotplug
4) CPU Boost Support
5) GPU OC to 657mhz
6) Custom Governors like Elementalx, Zzmoove, Ondemandplus,Abyssplugv2 And many more
7) I/0 Schedulers like bfq, fiops, sio and soon...
8) Kcal Support
9) LMK Added
10) DT2W Support (Thanks to Vasishath for his outstanding work on DT2W )
11) Faux Sound
12) And other optimizations and tweaks for Battery And Performance

INSTALLATION STEPS:

Minimum Requirements To Install Fallen_Shadow Kernel:
Recommended Custom Recovery TWRP and a Rooted Device

Installation Procedure:
Boot Into Recovery Mode
Dirty flash the current rom you are on
Dirty flash gapps
Flash provide Kernel Zip
Reboot To System

Download Link(BETA):

https://www.androidfilehost.com/?fid=24269982086992394

#Special Thanks To "Tarun93" as He Guided Me Through Basics!
#Thanks To "audahadi" For the Kernel Base.
#Thanks To "vasishath" For DT2W Support.
#Thanks To "Biplov Biswas" For Testing And Reverting Feedbacks!
#Thanks to all telegram group members!
And Thanks To All Other I "Missed"

XDA:DevDB Information
FALLEN_SHADOW, Kernel for the Xiaomi Mi 3

Contributors
@War_machine28, TheandroiDRaman, Tarun93
Source Code: https://github.com/Warmachine28/android_kernel_xiaomi_cancro
Kernel Special Features: DT2W,GPU OC,Focused On Battery And Stablity

Version Information
Status: Stable
Current Stable Version: C2
Stable Release Date: 2015-11-21
Current Beta Version: V1
Beta Release Date: 2015-11-10

Created 2015-11-10
Last Updated 2016-01-17

@War_machine28 · Nov 10, 2015

Reserved

-:FALLEN_KERNEL C1 CHANGELOGS[Only MM]:-

1) Bricked Hotplug By (@showp1984)
2) Franco Thermals Reworked By by @franciscofranco,
3) Gpu Oc to 657mhz And Uc to 100mhz,
4) Simple Gpu Algorithm,
5) USB Fast charge Reworked,
6) Faux Sound,
7) I/O schedulers like tripndroid, zen, fiops, bfq
8) DT2W Support,
9) CPU Voltage Control,
10) Powersuspend Driver,
11) CPU governors Like HYPER, BioShock, blu_active, Optimax And Adaptive
12) LMK support
13) CPU Boost Support
14) Vibration Strength Control,
15) Kernel Rebased To Marshmallow ( Android 6.x.x)

-: DOWNLOAD LINK(C1) :-

-:Kernel Without DT2W:-
-:For CM Based Roms:- https://www.androidfilehost.com/?fid=24345424848486683
-:For AOSP Based Roms:- https://www.androidfilehost.com/?fid=24345424848486657

-:Kernel With DT2W:-
-:For CM Based Roms:- https://www.androidfilehost.com/?fid=24345424848486896
-:For AOSP Based Roms:- https://www.androidfilehost.com/?fid=24345424848486907

:-The_FALLEN C2 changelogs [MM]:-

Kcal support added!

Removed Auto Smp Hotplug driver!
Thermals Fixed, no more extra heat!
Added Zen decision (custom hotplug driver)
Added Thunderplug Hotplug driver by Varun Chitre
Tuned Gpu a bit more!
Stuck to particular Frequency fixed,Cores now works properly!
Tuned all governors!
And other fixtures for stablity!

ownload Links [C2]:

:-Kernel For CM Based Roms-:
https://www.androidfilehost.com/?fid=24369303960687004

:-Kernel For AOSP Roms-:
https://www.androidfilehost.com/?fid=24369303960687003

NOTE:-

Those who r not willing to use DT2W , plz disable with KA!
Always Use Latest KA (Kernel Auditor)!
If wifi breaks on any version, use another one given! like if wifi breaks on CM build then try AOSP build! Its happens Cz of Internal and External wifi inside the respected MM rom!

@War_machine28 · Nov 10, 2015

Reserved

teodos · Nov 10, 2015

hello one simple question cause i might be mistaken. What exactly dirty flash means to flash the rom on top of the same i am on and to do the same with gapps and flash the kernel or to go to recovery clean the cache then flash the rom and the gapps and then the kernel and reboot ?

@War_machine28 · Nov 10, 2015

Flash rom and gapps then kernel on same Rom!

stratosk21 · Nov 10, 2015

@War_machine28 said:
"FALLEN_SHADOW"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

KEY-FEATURES

1) Compiled with UBERTC 6.0
2) USB Fast Charge
3) Alucard Hotplug
4) CPU Boost Support
5) GPU OC to 657mhz
6) Custom Governors like Elementalx, Zzmoove, Ondemandplus,Abyssplugv2 And many more
7) I/0 Schedulers like bfq, fiops, sio and soon...
8) Kcal Support
9) LMK Added
10) DT2W Support (Thanks to Vasishath for his outstanding work on DT2W )
11) Faux Sound
12)Voltage Control added
13) KSM added
14) And other optimizations and tweaks for Battery And Performance

INSTALLATION STEPS:

Minimum Requirements To Install Fallen_Shadow Kernel:
Recommended Custom Recovery TWRP and a Rooted Device

Installation Procedure:
Boot Into Recovery Mode
Dirty flash the current rom you are on
Dirty flash gapps
Flash provide Kernel Zip
Reboot To System

Download Link:
https://www.androidfilehost.com/?fid=24269982086992394

#Special thanks to Tarun93 as He Guided Me Through Basics And Used His Fixes And Governers

XDA:DevDB Information
FALLEN_SHADOW, Kernel for the Xiaomi Mi 3

Contributors
@War_machine28, Tarun93, TheandroiDRaman
Kernel Special Features:

Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2015-11-10

Created 2015-11-10
Last Updated 2015-11-10

Has this been tested on sMIUI?

@War_machine28 · Nov 10, 2015

alexbrian21 said:
Has this been tested on sMIUI?

Nope... U check... Out!

GhostWANTED · Nov 10, 2015

@War_machine28 said:
"FALLEN_SHADOW"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this KERNEL
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/

KEY-FEATURES

1) Compiled with UBERTC 6.0
2) USB Fast Charge
3) Alucard Hotplug
4) CPU Boost Support
5) GPU OC to 657mhz
6) Custom Governors like Elementalx, Zzmoove, Ondemandplus,Abyssplugv2 And many more
7) I/0 Schedulers like bfq, fiops, sio and soon...
8) Kcal Support
9) LMK Added
10) DT2W Support (Thanks to Vasishath for his outstanding work on DT2W )
11) Faux Sound
12)Voltage Control added
13) KSM added
14) And other optimizations and tweaks for Battery And Performance

INSTALLATION STEPS:

Minimum Requirements To Install Fallen_Shadow Kernel:
Recommended Custom Recovery TWRP and a Rooted Device

Installation Procedure:
Boot Into Recovery Mode
Dirty flash the current rom you are on
Dirty flash gapps
Flash provide Kernel Zip
Reboot To System

Download Link:
https://www.androidfilehost.com/?fid=24269982086992394

#Special thanks to Tarun93 as He Guided Me Through Basics And Used His Fixes And Governers

XDA:DevDB Information
FALLEN_SHADOW, Kernel for the Xiaomi Mi 3

Contributors
@War_machine28, Tarun93, TheandroiDRaman
Kernel Special Features:

Version Information
Status: Beta
Current Beta Version: V1
Beta Release Date: 2015-11-10

Created 2015-11-10
Last Updated 2015-11-10

good work bro

stratosk21 · Nov 10, 2015

@War_machine28 said:
Nope... U check... Out!

Flashing steps? Quite sure is different from custom roms as I don't need to flash gapps.

@War_machine28 · Nov 10, 2015

alexbrian21 said:
Flashing steps? Quite sure is different from custom roms as I don't need to flash gapps.

Nope buddy nthng special.. I mentioned so cz of precautions.. Nthng.. Else!

@War_machine28 · Nov 10, 2015

stratosk21 · Nov 10, 2015

I just flashed with no dirty flash of my rom. Worked with no problems, will test for battery life now.

@War_machine28 · Nov 10, 2015

alexbrian21 said:
I just flashed with no dirty flash of my rom. Worked with no problems, will test for battery life now.

Cool... Go on!!

kalekume · Nov 10, 2015

Just flashed on latest xiaomi.eu 11.05, at the moment all OK

@War_machine28 · Nov 10, 2015

kalekume said:
Just flashed on latest xiaomi.eu 11.05, at the moment all OK

[emoji4]

Sent from my MI 3W using Tapatalk

fluster84 · Nov 10, 2015

Followed the installation instructions but my Mi4 failed to boot after flashing kernel. My phone is getting stuck on a black screen after the Mi logo shows up when rebooting. Also, I am using Mokee 15/11 Release.

@War_machine28 · Nov 10, 2015

fluster84 said:
Followed the installation instructions but my Mi4 failed to boot after flashing kernel. My phone is getting stuck on a black screen after the Mi logo shows up when rebooting. Also, I am using Mokee 15/11 Release.

Sry for inconvenience... Bt i haven't tuned it for mi4.. Bt surely will do it soon..! [emoji4]

Sent from my MI 3W using Tapatalk

kalekume · Nov 11, 2015

VPN is not working for me
Rom: xiaomi.eu 11.05

@War_machine28 · Nov 11, 2015

kalekume said:
VPN is not working for me
Rom: xiaomi.eu 11.05

Sry buddy.. Its not d problem of kernel.. Mine working fine... Might be other issue!

carmos · Nov 11, 2015

Bootloop on last .eu miui rom

[KERNEL][UPDATED 17/01][MM][AOSP/CM][Mi3]FALLEN_SHADOW C2

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Attachments

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Similar threads

Top Liked Posts