Hello everyone,
This is the thread of TotalAndDroid (www.blagoev.com/totalanddroid/) - The most advanced Total Commander file system plugin for Android devices.
If you are using Total Commander and want to use your android with it, check it out. Please leave feedback and suggestions for improvements at the site or here in the forum.
TotalAndDroid
v4.0
New: Support for dynamic wireless connections. (opening \\TAD\IPort will try to connect automatically the device)
New: Support "reboot to download" and "Power off" commands
New: Support "hot reboot" command
New: "Screenshow.png" special file will capture device screenshot (Can be copied, or opened in lister with F3)
New: Support custom shell commands from TC command bar.
Fixed: Date and time of pulled files from device
Fixed: Connecting to devices that has $ instead of # as shell suffix
Fixed: Moved to synchronous sockets by default (some computer configugrations reported socket errors when async communication)
Fixed: Use TAD when device is in recovery mode
For more info check this news page
v3.5
» New: Support for background operations
» New: Huge, performance improvements in all operations
» New: Vast memory optimizations all over TAD plugin
» New: Faster download and upload of files and directories by reusing commmunication channels for file operations
» New: Introduced TAD context actions.
» New: "Remove all files and directories" context action
» New: "Remove all selected files and directories" context action
» New: "Get directory sizes" context action. Shows total directory size (busybox required)
» New: File listings are much faster now with very few resources consumed
» New: Make directory is much faster with single create operation on all devices and any directory depth
» New: Reboot device, Reboot to bootloader, Reboot to recovery commands in .TAD folder
» New: TotalAndDroid update checking.
» New: ".Update TAD" special file is shown when new version is available. (Navigates to download page)
» New: ".TAD Options" special file so options page is more easelly discovered.
» New: ".Navigate to root" special file to ease going to TAD root when device is not found but path was preserved from a previous session
» New: ".Hide directory sizes" special file (or do a CTRL + R to hide directory sizes)
» Fixed: Multiple instances of TC with TAD loaded to work side by side
» Fixed: File date and time to be correct after upload
» Fixed: File permissions to be correct after upload
» Fixed: Better handling of device offline status
» Fixed: Create directory to succeed if the directory is already present
For more details and description of the new features check this News page
v3.0
» New: x64 in-proc support.
» New: Full x64 and x32 on all Windows OSes XP, Vista, Win7, Win8 on all TC versions installed and portable.
» New: Change file permissions
» New: Applications listing (in .TAD\Applications folder)
» New: Applications uninstall (enter or delete from .TAD\Applications folder)
» New: Added kernel log messages support (dmesg)
» New: Added .TAD folder in root of every device for TAd specific functionality
» New: Added Windows 7 style dialogs
» New: Custom device names for USB and Wireless connections.
» New: TAD options
Added TAD icon and version information
Added TAD options showing plugin version number.
Added TAD options to restet settings
Added TAD options to reset device names
» Fixed: Simplified Application installation experience
» Fixed: Moved bugreprot, logcat, dmgesg to .TAD special folder
» Fixed: copy/move on same device.
» Fixed: some files missing in listings
» Fixed: Push and pull to handle file operations better
For more check here
Cheers,
blagoev
v2.0
» x64 bit support (Total Commander x64 8.0 or above)(out of process)
» Added support for installation of applications
» Preserve last used IPort when wireless connect
» Support read-write to /system
» Automatically connect as root, where possible
» Updated adb tools that come with the TAD to latest version
» Fix: A bug when file size is 0 when reporting progress
» Fix: Listing of /dev folder
» Fix: Newly connected devices are not shown on \\TotalAndDroid root refresh
more on (TotalAndDroid 2.0)
Thanks,
Blagoev
This is the thread of TotalAndDroid (www.blagoev.com/totalanddroid/) - The most advanced Total Commander file system plugin for Android devices.
If you are using Total Commander and want to use your android with it, check it out. Please leave feedback and suggestions for improvements at the site or here in the forum.
TotalAndDroid
v4.0
New: Support for dynamic wireless connections. (opening \\TAD\IPort will try to connect automatically the device)
New: Support "reboot to download" and "Power off" commands
New: Support "hot reboot" command
New: "Screenshow.png" special file will capture device screenshot (Can be copied, or opened in lister with F3)
New: Support custom shell commands from TC command bar.
Fixed: Date and time of pulled files from device
Fixed: Connecting to devices that has $ instead of # as shell suffix
Fixed: Moved to synchronous sockets by default (some computer configugrations reported socket errors when async communication)
Fixed: Use TAD when device is in recovery mode
For more info check this news page
v3.5
» New: Support for background operations
» New: Huge, performance improvements in all operations
» New: Vast memory optimizations all over TAD plugin
» New: Faster download and upload of files and directories by reusing commmunication channels for file operations
» New: Introduced TAD context actions.
» New: "Remove all files and directories" context action
» New: "Remove all selected files and directories" context action
» New: "Get directory sizes" context action. Shows total directory size (busybox required)
» New: File listings are much faster now with very few resources consumed
» New: Make directory is much faster with single create operation on all devices and any directory depth
» New: Reboot device, Reboot to bootloader, Reboot to recovery commands in .TAD folder
» New: TotalAndDroid update checking.
» New: ".Update TAD" special file is shown when new version is available. (Navigates to download page)
» New: ".TAD Options" special file so options page is more easelly discovered.
» New: ".Navigate to root" special file to ease going to TAD root when device is not found but path was preserved from a previous session
» New: ".Hide directory sizes" special file (or do a CTRL + R to hide directory sizes)
» Fixed: Multiple instances of TC with TAD loaded to work side by side
» Fixed: File date and time to be correct after upload
» Fixed: File permissions to be correct after upload
» Fixed: Better handling of device offline status
» Fixed: Create directory to succeed if the directory is already present
For more details and description of the new features check this News page
v3.0
» New: x64 in-proc support.
» New: Full x64 and x32 on all Windows OSes XP, Vista, Win7, Win8 on all TC versions installed and portable.
» New: Change file permissions
» New: Applications listing (in .TAD\Applications folder)
» New: Applications uninstall (enter or delete from .TAD\Applications folder)
» New: Added kernel log messages support (dmesg)
» New: Added .TAD folder in root of every device for TAd specific functionality
» New: Added Windows 7 style dialogs
» New: Custom device names for USB and Wireless connections.
» New: TAD options
Added TAD icon and version information
Added TAD options showing plugin version number.
Added TAD options to restet settings
Added TAD options to reset device names
» Fixed: Simplified Application installation experience
» Fixed: Moved bugreprot, logcat, dmgesg to .TAD special folder
» Fixed: copy/move on same device.
» Fixed: some files missing in listings
» Fixed: Push and pull to handle file operations better
For more check here
Cheers,
blagoev
v2.0
» x64 bit support (Total Commander x64 8.0 or above)(out of process)
» Added support for installation of applications
» Preserve last used IPort when wireless connect
» Support read-write to /system
» Automatically connect as root, where possible
» Updated adb tools that come with the TAD to latest version
» Fix: A bug when file size is 0 when reporting progress
» Fix: Listing of /dev folder
» Fix: Newly connected devices are not shown on \\TotalAndDroid root refresh
more on (TotalAndDroid 2.0)
Thanks,
Blagoev
Last edited: