F
fuss132
Guest
Hey hey hey,
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
Changelog (3.1.0):
Changelog (3.0.0):
Changelog (Release 2.1.5):
Changelog (Release 2.0.6):
Changelog (Release 2.0.0):
Changelog (Release 1.3.5):
Changelog (Release 1.3.1):
Changelog (Release 1.3.0):
Changelog (Release 1.1.0):
Changelog (Initial Release 1.0.3):
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
proudly presenting my aosp kernel for you. Big thanks to Codeworkx, this kernel is based on his source! I´m not responsible if something happens to your device!
Kernel can be used on:
- Every AOSP based rom (e.g. AOKP, CM9, Rootbox...)
Features:
- OC to 1.35Ghz
- GPU OC to 383mhz
- RAM OC
- UV
- I/O Tweaks
- Patches for better batterylife
- Performance Tweaks
- Fastcharge
- Swpa
- zRam
- NTFS and CIFS
Changelog (3.2.0):
- Based of latest source code (the updated one)
- Only compiled for jellybean (based on that updates)
- Massive cleanup
- Optimized code used
- Optimized undervolting
- Really the fastest horsepower ever
- Added 1.5Ghz Overclock
- Added OMAP_IPU_IDLE_CONFIG
- Added reduced wifi voltages for power savings
- Updated SIO
- Tweaked CPU-IDLE governor
- Fixed 1.35Ghz jumping back
- Fixed screenFlickring
- Fixed screenoff animation failing sometime
- Fixed heat -> lower cpu voltages should be stable enough
Changelog (3.1.0):
- Now again booting
- Horsepower is complete rebased - clean - fast - stable
- ClockWorkMod autoreboot issue is fixed
- All sources updated -> speed
- USB Mass storage is working correct now on aosp kernel
- Default governor is now abyssplug
Changelog (3.0.0):
- Horsepower is now available as a BETA version for stock roms
- Low RAM OC
- Performance tweaks
- Code Cleaning
- Preparing for dualboot (still long way to go)
Changelog (Release 2.1.5):
- Added savagedzen governor
- Added sakuractive governor
- Added brdzilianeax governor
- Added minmax governor
[*]Added abyssplug governor - Added lulzactive governor
- Added lazy governor
- Added pegasusq governor
- Added smartassv2 governor
- Added scary governor
- Added HYPER governor
- Added wheatley governor
- Updated interactive governor
- Updated interactiveX governor
- Updated lagfree governor
- Changed default governor to smartassv2
Changelog (Release 2.0.6):
- Rebased ics kernel
- No Touch recovery for both (ics and jb) versions
- Added possibility to undervolt
- 300 mhz as default cpu speed
Changelog (Release 2.0.0):
- Jellybeaned! Both versions (ics and jb) contain same features
Changelog (Release 1.3.5):
- Added core2 managemend
- Fully working settingsfor fastcharge (through app)
- Hope to improve stableness by disabling interactivex governor. Thanks to aidfarh!
- Touch and no touch recovery versions
Changelog (Release 1.3.1):
- Added interactiveX governor
- Added lazy governor
- Enabled ip tunneling
Changelog (Release 1.3.0):
- Enabled fastcharge (enable in app)
- Enabled zRam (partly working, full support in jellybean)
- Enabled NTFS support
- Enabled CIFS support
- Added Touch CWM (Swipe up + down to navigate; swipe right to select; swipe left to go back)
- Improved CWM
- Improved TouchScreen support
Changelog (Release 1.1.0):
- Fixed Wlan
- Fixed OC
- OC Tweaks
- Initial GPU OC to 384mhz
- Set min processor speed to 0.15Ghz for better batterylife
- Rebuild whole kernel
- Added more I/O tweaks
- Added USB fast charging
- First start at deep idle not fully working yet
- Improve kernel stability by not killing kernel threads
Changelog (Initial Release 1.0.3):
- keyboard: cypress: Stop notification on low battery
- improve the performance of memcpy and memmove of the general version
- i/0 tweaks
- initial OC to 1.3Ghz
- expanded OC to 1.35Ghz
- prepared for lulzactive gorvernor
For detailed information visit my github commit list
Installation instructions:
- Download the attached .zip
- Put it to your internal sd-card
- Go into recovery mode
- Hit "install zip from sdcard"
- Reboot and enjoy
Download:
Horsepower 3.0.0 for Stock ICS Roms BETA!
Horsepower 3.0.0 for AOSP ICS Roms
Horsepower 3.1.0 for AOSP Jellybean Roms
__________
Core2Management:
Save your battery and disable the second core of your android device when you dont need it!
!- This app is only for dual core devices made by Samsung -!
This app should work on most android dual core devices from Samsung (maybe also on others but these are untested!). Please report on which devices the app works and on which it doesnt. You have to be rooted! Every time you reboot you need to redisable second core! If the second core starts again at some time use another governor. Not working with hotplug!
Tested devices:
* Galaxy S2 I9100
* Galaxy S2 I9100G
* Galaxy S3
* Galaxy S1
* Galaxy R I9103
* Galaxy Nexus
The app is working with stock cm10 kernel, too!
__________
Sources:
https://github.com/fuss132/android_kernel_samsung_t1/
Last edited: