Read the first three posts, and if you still don't get it there are youtube videos.
[TOOL] HTC One S All-In-One Toolkit v4.0 [7-10-2013] [PERM ROOT][Noob-Proof]
- Thread starter hasoon2000
- Start date
-
- Tags
- development
- Status
Read the first three posts, and if you still don't get it there are youtube videos.
Thanks for the reply.
I read the first three posts. There is no information about the steps. youtube videos are for HTC Wildfire and not HTC One S
also, there is no information what the buttons are meant for.
I am not here to point out things but better to be safe than sorry.
The videos are on the wildfire, but they work with any version of the toolkit, basically. The toolkit is simple.
Just used the tool on HTC ONE S (S4) and it worked great. A little bit confused on the perm root that was needed to be done, cause I thought that after installing the custom bootloader I was done.
Anyway, it's a new phone and I'm currently on Stock ROM 4.0.4. Can I update to the new 4.1.1? Should I do something before updating? Would appreciate some pointers on this.
Anyway, it's a new phone and I'm currently on Stock ROM 4.0.4. Can I update to the new 4.1.1? Should I do something before updating? Would appreciate some pointers on this.
You don't need to root unless you wanted to root the stock rom. You should be good for any Sense rom but you will want to update the firmware to JB so you can flash AOSP's roms.
thanks again for all your help.
I've rooted the phone because I needed it to get the sim unlock code. Should I unroot it before applying the update or can I go ahead and update, and then re-root again?
Isn't updating the firmware part of the stock rom update?
I've rooted the phone because I needed it to get the sim unlock code. Should I unroot it before applying the update or can I go ahead and update, and then re-root again?
Isn't updating the firmware part of the stock rom update?
Thx, I'm currently planing to use stock ROM only, so no need to update firmware yet.
If you already did the stock update to JB, then no. You will have to RUU to the jellybean one. It's easy to find, or I also have it in my dropbox if you want a link.
Thread closed
Thread closed until further notice for forum rule violations in the application.
The issue does not involve malware, privacy concerns or any other immediate danger to users of the toolkit.
As a matter of policy, moderators will not discuss the details of the case with third parties.
The OP is aware of the situation.
Distributing, posting links or providing information on how to obtain the toolkits in their current form will not be allowed.
Thread closed until further notice for forum rule violations in the application.
The issue does not involve malware, privacy concerns or any other immediate danger to users of the toolkit.
As a matter of policy, moderators will not discuss the details of the case with third parties.
The OP is aware of the situation.
Distributing, posting links or providing information on how to obtain the toolkits in their current form will not be allowed.
Last edited:
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
497Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
I would like to add for those that like my toolkit, PLEASE DO NOT POST IT ELSEWHERE WITHOUT MY PERMISSION!
I have seen multiple sites who copy and paste my work to their site! If I do not approve of it, then do not do it! it will discourage me from adding updates since it is being used for their own benefits!
tl;dr.
If you post my work without permission, don't expect updates!
I created an easy to use GUI program for the HTC Amaze and I decided to make one for the HTC One S. I spent a good over 10+ hours to learn how to script, watch videos on how to do it, working on it during school when I should have been listening lol and all that fun stuff. I am going to fix it and up and add more updates to it. You CAN place requests and I will try to fulfill it!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader (after it enters into bootloader, press the power button to enter Fastboot)REMOVED. No longer necessary.
- Get Token ID.Register at HTCDev, login to the site and submit the Token ID here.Buttons have been replaced and include links.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Install Recoveries
- User Provided Recoveries
- TWRP 2.5.0.0 (S3 Model)
- TWRP 2.5.0.0 (S4 Model)
- TWRP 2.5.0.0 (Special Edition 64GB Model)
- User provided kernels
- Link to PM me if you need a phone unlocked (XDA)
- Link to the One S Development thread (XDA)
- Boot Into Recovery
- Boot into Bootloader
- Relock Bootloader (must be in fastboot)
- APK Batch Installer (Credits to hamsteyr)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Mods of the forum!
- Devs for making us ROMS!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
DONATIONS132Downloads
Mod edit: Download links removed
Changes
V1.0 Released! 4-17-2012
- Initial Release
v1.1 Released! 6-11-2012
- Removed all old CWM/Stock Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Added TWRP 2.1.7
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
V1.2 Released 10-7-12
- Updated TWRP to 2.2.2.0
- Updated CWM to 5.8.3.1 Touch
- Updated Chainfire's SuperSU to 0.96
- Cleaned up a little code on my end
v2.0 Released 11-10-2012
- Updated TWRP 2.2.0 to 2.3.1.0 for S4 models
- Added TWRP support for S3 Models!
- Updated SuperSU from 0.93 to 0.97
- Added more info to my scripts so it would be easier to understand how to do things
- Removed a few links
v3.0 Released 12-23-2012
- Major Overhaul
- Users can now select their own recovery, kernel and unlock_code.bin. You no longer need to place it in a the data folder. Just browse for it
- Removed a lot of .bat scripts and integrated it in the program
- Updated SuperSU to 0.99
- Removed CWM
- Added TWRP for the Special Edition 64GB model
- Updated TWRP to 2.3.3.0 (S3 and S4)
- Added a few links
- Added ADB sideload (for use in TWRP)
This Update took FOREVER to do, but I did it for you guys!!!
v3.1 Released! 1-23-2013
- Fixed a bug where when you want to get your token ID, it'll boot into recovery rather than bootloader.
- When you want to relock the bootloader, it'll boot into bootloader and then lock it.
- Added a link to the factory RUU for Ville,VilleC2,VillePlus.
- Added Check CID feature
- Added a way to flash RUU Zip files
- Automated a few commands. No longer need to use the boot into bootloader then use the command to flash a kernel/recovery/unlock_code.bin
- Added more clarity
v3.3 Released! 1-30-2013
- Updated all TWRP recoveries to 2.4.0.0
- Updated SuperSU from 0.99 to 1.02
v3.3.1 Released! 2-1-2013
- Updated all TWRP recoveries to 2.4.1.0
- Updated SuperSU from 1.02 to 1.04 <--- This should fix the root issues now!
v3.4 Released! 3-2-2013
- Updated drivers to support Windows 8
- Updated all TWRP to 2.4.3.0
- Updated SuperSU to v1.20
- Removed the kernel section and added the kernel flashing under the Extras section
- Added new commands: GetVar All, Check CID
- Added S-Off ONLY commands: Write CID, Return to S-ON
- Added links: CID list, S-Off thread, SuperCID thread
- Added a section to S-Off the phone.
NOTE: I did not add any of the files from the S-Off thread/exploits to my toolkit. I added the official links to download the files but the files are not actually within my toolkit. Therefore, I did not violate what Jcase and beaups said since I did not incorporate the files to my toolkit.
v3.5 Released! 4-9-2013
- Updated HTC Drivers
- Updated all TWRP recoveries to 2.5.0.0
- Added 2 links (1 to follow me on Twitter and 1 to a YouTube video on how to ask for help properly)
- Added an Erase Cache command
v4.0 Released! 7-10-2013
- Removed Drivers and replaced it with a link (decreases size by 15mb)
- Updated all TWRP to 2.6.0.0
- Added Phil's CWM
- Fixed the Your Own Recovery Script.
- Updated SuperSU to 1.41
- New File Hosting service and added the links to my toolkit files in the program.
- Added a referral program.57Bugs
- Directory has to have one word.
Ex:
Looking to add in the future
- Kernels
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.3218v3.4 Released! 3-2-2013
- Updated drivers to support Windows 8
- Updated all TWRP to 2.4.3.0
- Updated SuperSU to v1.20
- Removed the kernel section and added the kernel flashing under the Extras section
- Added new commands: GetVar All, Check CID
- Added S-Off ONLY commands: Write CID, Return to S-ON
- Added links: CID list, S-Off thread, SuperCID thread
- Added a section to S-Off the phone.
NOTE: I did not add any of the files from the S-Off thread/exploits to my toolkit. I added the official links to download the files but the files are not actually within my toolkit. Therefore, I did not violate what Jcase and beaups said since I did not incorporate the files to my toolkit.
Download is in Post 2.
