[ROM][GT-P31XX][JB][4.1.2] Android Open Kang Project | ROMs and Kernels | Milestone 1

Newest change logs are available at the AOKP site



Flash Rom in CWM or TWRP
Wipe data/factory reset if you are coming from another ROM
Flash the zip
Wipe cache/dalvik cache
Then flash GApps.
Reboot


Download My Semi-Nightly Builds:
androtransfer.com/?developer=cmenard

Download Official Milestone 1
androtransfer.com/?developer=AOKP

GApps: http://goo.im/gapps

What works:
Samsung Keyboard Dock
Almost Everything

What doesn't work:
IR Blaster?? A WIP
You tell me...


Kernels

The same custom kernel used in AOKP ROMs now available to use in all AOSP based ROMs. (AOKP, CM10, ParanoidAndroid) Will not work with stock Touchwiz based ROMs!!

These use the anykernel flash method so it creates a new boot.img on the fly. It will not interfere with any customizations that may be in your current boot.img's ramdisk.

Download Kernel
androtransfer.com/?developer=cmenard&folder=Kernels


AOKP's Source can be found here: Github

=======================================================================================

Thanks to:
AOKP Team
codeworkx and Teamhacksung for the initial CM10 work
Please do not copy and paste this post anywhere else. Always point the post to this thread since it will always have the most recently updated version. Thank you and enjoy the Jelly Bean infused Unicorns!

=======================================================================================

9/30/2012

Among the many updates and fixes in Build-4 we have a new kernel. Keeping the trend alive we have yet another first for our Tablets. Voltage Control!! You can use Performance Settings in ROM Control to set voltages, SetCPU and a few other apps available on the market work as well. NOTE don't set any voltages at boot until you are once again 1000% sure your device is stable. It's pretty safe to UV 1GHz and below, just use small 25mv steps to begin with. 1.2GHz is close on most devices, speeds above that I wouldn't mess with too much. Remember all devices are different, so there aren't any magic voltages that will make you want to throw away your charger. Use common sense and have fun tinkering.

New kernel AOKP_p31xx_1-52GHz_v2-2.zip posted..

9/21/2012

I've built and uploaded a new kernel that includes a few more OC options. Configured now are 1.2GHz, 1.35GHz, 1.42GHz, 1.48GHz, and 1.52GHz. There have been a few other tweaks made that all add up to FAST. Remember your device may not be able to handle the same speeds as someone else's. Don't cry or feel bad, it's just the hardware luck of the draw. Just like people, there are some freaks out there. The new kernels have 1-52GHz in the file name. Now go forth and flash!!

9/17/2012
New Another overclock option!

New Semi-Nightly Sept. 16/17 builds now include a 1.42GHz step. Kernel still safe boots to 1.2GHz and you can use built-in Performance settings or SetCPU to OC. I wouldn't recommend using "set at boot" until you're 1000% sure your device is stable at 1.42GHz.

Working Samsung keyboard dock

While not all the special keys work it's a start

On the fly GPU Overclocking

Another first for our tabs! Based on imoseyon's Tuna kernel work. To change speeds simply edit /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc. Values are as follows: 0 = 307MHz 1 = 384MHz 2 = 512MHZ

On top of the built in 1.42GHz overclock the tab runs really well. Be mindful the higher GPU freqs will cause an increase in heat production. The values will revert back to 0 (307MHz) on boot. So if you find your tab locked up or acting odd at a higher clock speed just reboot it. On the other side of that you'll need to change the value every time you boot the tablet.
Some nenamark2 scores to illustrate the GPU overclocking...

Value 0 = 307MHz



Value 1 = 384MHz



Value 2 = 512MHz

scottx . said:

Thanks everyone for following my AOKP thread. Its now time to pass it on..

Enjoy!

Click to expand...

Click to collapse

Thanks Scott for originally posting it over here!

scottx . said:

Need to be able to set gpu at 1. Maybe ill make a script to do it.

Click to expand...

Click to collapse

I use Root Explorer just because I'm too lazy to open terminal or script it :silly:

Official Build link should work now.