Whenever I am trying to flash my note pro every time odin faild to flash and on my device showing "Invalid ext4 Image" even whenever I want to emergency firmware recovery or update, also failed and stuck on download mode and my device says "invalid ext4 img"
Firmware installation stuck on "invalid ext4 img" for odin or kies both.
My device is SM-P905
Already I have downloaded 3 rom from sammobile, but all file failed to install!
the file are:
P905XXUANAE_P905DBTANA6_DBT.zip
P905XXUANAE_P905OXXANA7_BTU.zip
P905XXUANC3_P905BTUAND2_BTU.zip
when I am trying to flash, odin says:
"<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P905XXUANC3_P905BTUAND2_P905XXUANA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!"
** I have tried using different usb cable to flash
** I have tried both 3.9 or 3.7 odin
** I have tried different pc to flash
** I have used 2.0 or 3.0 both usb cable
** I have tried both kies3 or previous kies
** I am thinking may be the problem is about pit. and I don't know where I will find a .pit file for SM-P905. some how may be the pit of my note pro is corrupted. i don't know actually I am not a developer!
Firmware installation stuck on "invalid ext4 img" for odin or kies both.
My device is SM-P905
Already I have downloaded 3 rom from sammobile, but all file failed to install!
the file are:
P905XXUANAE_P905DBTANA6_DBT.zip
P905XXUANAE_P905OXXANA7_BTU.zip
P905XXUANC3_P905BTUAND2_BTU.zip
when I am trying to flash, odin says:
"<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> P905XXUANC3_P905BTUAND2_P905XXUANA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> sbl1.mbn
<ID:0/008> NAND Write Start!!
<ID:0/008> aboot.mbn
<ID:0/008> rpm.mbn
<ID:0/008> tz.mbn
<ID:0/008> sdi.mbn
<ID:0/008> NON-HLOS.bin
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> system.img.ext4
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/008> Removed!!
<ID:0/008> Added!!"
** I have tried using different usb cable to flash
** I have tried both 3.9 or 3.7 odin
** I have tried different pc to flash
** I have used 2.0 or 3.0 both usb cable
** I have tried both kies3 or previous kies
** I am thinking may be the problem is about pit. and I don't know where I will find a .pit file for SM-P905. some how may be the pit of my note pro is corrupted. i don't know actually I am not a developer!
Last edited: