Disclaimer: I am not responsible if you use this and brick your device or if your device blows up, catches fire, you get fired because the alarm failed, and global thermonuclear war
A Samsung Galaxy S3 USA CURRENTLY RUNNING CM11 failure to have this will result in a brick and possibly even a HARD BRICK
A functioning brain
A working recovery
Basic instruction following skills
STEPS:
Download the two zips and copy them to your phone
Link for file 1: https://drive.google.com/file/d/0B5BIHhwzM7wWQjZ5ejlsS2FqTjA/view?usp=sharing
Line for file 2: https://drive.google.com/file/d/0B5BIHhwzM7wWUmVsQzVBR3F1enM/view?usp=sharing
Reboot into recovery
Reboot the device and set up, setup however is NOT finished.
Download: https://drive.google.com/file/d/0B5BIHhwzM7wWaHJrUzByb20yWVk/view?usp=sharing and put it on your SDCARD
You now have 2 choices:
ADB METHOD:
The last part is to fix permissions and fix a strange CyanogenMod "feature" that breaks mobileterminal.
Use make kali_defconfig to make the Kali Kernel correctly if compiling
Please post flash time and results below, this should work on ALL d2 devices under the d2lte label CM uses.
XDA:DevDB Information
Kali Nethunter for d2vzw, ROM for the Verizon Samsung Galaxy S III
Contributors
dank101
Source Code: https://bitbucket.org/dank101/android_kernel_samsung_d2_kali
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CM11
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-06-09
Created 2015-06-10
Last Updated 2015-06-09
Kali Nethunter ported to the Samsung Galaxy S3
REQUIREMENTS:A Samsung Galaxy S3 USA CURRENTLY RUNNING CM11 failure to have this will result in a brick and possibly even a HARD BRICK
A functioning brain
A working recovery
Basic instruction following skills
STEPS:
Download the two zips and copy them to your phone
Link for file 1: https://drive.google.com/file/d/0B5BIHhwzM7wWQjZ5ejlsS2FqTjA/view?usp=sharing
Line for file 2: https://drive.google.com/file/d/0B5BIHhwzM7wWUmVsQzVBR3F1enM/view?usp=sharing
Reboot into recovery
Reboot the device and set up, setup however is NOT finished.
Download: https://drive.google.com/file/d/0B5BIHhwzM7wWaHJrUzByb20yWVk/view?usp=sharing and put it on your SDCARD
You now have 2 choices:
ADB METHOD:
- run adb root
- run adb shell mount -o remount,rw /system
- run adb shell sh fixkaliterm.sh
- run su
- accept the superuser prompt.
- run mount -o remount,rw /system
- run fixkaliterm.sh
The last part is to fix permissions and fix a strange CyanogenMod "feature" that breaks mobileterminal.
Use make kali_defconfig to make the Kali Kernel correctly if compiling
Please post flash time and results below, this should work on ALL d2 devices under the d2lte label CM uses.
XDA:DevDB Information
Kali Nethunter for d2vzw, ROM for the Verizon Samsung Galaxy S III
Contributors
dank101
Source Code: https://bitbucket.org/dank101/android_kernel_samsung_d2_kali
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: CM11
Based On: CyanogenMod
Version Information
Status: Testing
Current Beta Version: 0.1
Beta Release Date: 2015-06-09
Created 2015-06-10
Last Updated 2015-06-09
Last edited: