Remove All Ads from XDA
Honor View 10
Post Reply Email Thread
So I had installed a 2012 Nexus 7 in my car dash. That went relatively easy since you could just move the ribbon cable for the charge port and plug almost any cable into it. I have it apart and decided to upgrade to the 2013 version. The problem is the screen is attached to the same board the Micro usb port is soldered to and I have almost no room on the side of the tablet. It being a Hair taller is killing me. Does anyone know where I can get a very low profile micro usb cable? Something similar to what is attached to this charger. Need it to have data as well. Or if anyone has any ideas on what could be done I'd like to hear.
6th May 2014, 08:54 PM |#2  
Junior Member
Flag Prague
Thanks Meter: 0
I want to use 90 ° micro usb cable, that would not fit?
12th August 2014, 07:47 AM |#3  
AdamMoore746's Avatar
Junior Member
Thanks Meter: 1
An Idea
The board with the micro USB can easily be removed with a small screwdriver so it would just hang behind the nexus inside the car. That's no good if you plan on using the nexus like a regular tablet.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes