Having used r10_rebirth, I think Neo4 is the best in battery vs performance.
I like Neo4 but would like to make outgoing call
How I wish it's fixed Anyway good luck in ur exams zach!!
Having used r10_rebirth, I think Neo4 is the best in battery vs performance.
I like Neo4 but would like to make outgoing call
How I wish it's fixed Anyway good luck in ur exams zach!!
Currently running nightly #16 w/the latest kernel. All is good except the random in call reboot. Thank you for your hard work!
Sent from my SGH-I897 using XDA App
MIUI MCGv4.3 user here. Experienced reboots when making outgoing call with Neo4....
Random thought: I've removed TouchWiz according to this post (http://xdaforums.com/showpost.php?p=12077221&postcount=5), does it make an impact?
Now I'm with r10_rebirth and everything works fine with default governor (smartass) but battery life not as GOOD as Neo4
pls ignore this post if it's not relevant, just trying to make things going
on MIUI
install kernel
CM7_SGSMTD_20110529-09_r_platypus-revolutions-kernel_0_NEO_04-energy.zip
fix permission and is OK
no reboot in call
sorry guys I won't be involved with anything kernel, CM7 or MIUI-related at least until July
due to personal reasons + study
and thanks for flying with Platypus Kernels
It's the same with or without TW support.
I think I'm gonna switch to Cyanogen tonight..
I'M A SUPPORTER OF BRINGING OFFICIAL ICS TO THE VIBRANT AND OTHER GALAXY S DEVICES!
> CLICK HERE FOR MORE INFORMATION <
Tk-Glitch said:Note that these UV settings will be unstable on many devices. It's only informative.
1600 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1500 MHz - 1.500v / -> That's high and many devices will fail on this frequency. Find working UV for you if any.
1440 MHz - 1.475v / -75mv
1400 MHz - 1.450v / -75mv
1300 MHz - 1.400v / -75mv
1200 MHz - 1.350v / -75mv
1000 MHz - 1.250v / -50mv - If you have stability issues, try to let this one by default.
800 MHz - 1.200v / -75mv
400 MHz - 1.050v / -100mv
200 MHz - 0.950v / -150mv
100 MHz - 0.950v / -200mv - (can be very different between two devices)
More volts is not always equal to more stability. Try to add more UV (less volts) if the frequency you're trying to achieve is unstable.
Considering all phones will respond differently to OC/UV, to tweak the values to suit your device will be required.
By default, no overclock/undervolt is applied. You'll need to use one of the tools below to adjust the frequencies and voltages.
Note : Never ever use SetCPU with this kernel. You could encounter many stability problems like random reboots or bootloops.
Changelog since Neo 18 / Neo XX.1:
- pawit's sdcard (potential data corruption) fix
- (led-notification editions): updated touchkey driver + added support for cm7-settings
NEO_17 r18 [open test]: Changelog: http://bit.ly/rufUoV, GT-i9000/SGS/Telus: http://bit.ly/nyjYRk ; each 2 kernels (stock & voodoo - color); screenstate_scaling V51 http://bit.ly/pQYnvS - 600 MHz,µSD dataloss fix, ...
Changelog said:BIG FAT WARNING:
currently for some the installation seems to reset contacts & system state
(and thus deletes e.g. emails)
so make sure YOU BACKUP BEFORE YOU INSTALL this kernel !
(which is generally a good idea with installing kernels & ROMs)
Recommended INSTALLATION PROCEDURE (when switching to Neo/Platypus kernels):
1) backup your data
2) install kernel + reboot into recovery (so that you're running recovery with new kernel)
3) format /system + factory reset
4) re-flash ROM + re-flash kernel [without re-booting in between]
5) reboot - now you can restore data [if restoring a nandroid - don't forgot to re-flash the kernel
in the same session while still in cwm recovery without reboot in between]
NEO 17 (r18 - codename Butterfly) changelog [SGS/Telus, Captivate, Vibrant]
Changes (from r16 [r17 - intermediate BLN build]):
• corrected voodoo FM radio enhancements only to depend on SGS/Telus build
• usb battery drain fix (thx to farmatito)
• quiet binder error messages in dmesg - useless for productivity builds
• optimized checksum library
• added: 600 MHz step
• bumped 1000 MHz (1 GHz) by +25 mV [equals samsung kernel stock voltage]
• bumped system_tweak init-script to V63 (now similar to the one used on Neo XX)
• bumped toolchain to 4.5 09/2011
• fix memory-leak on dma-mapping (thx to existz for the idea !)
• fix data loss/corruption with bad microSD cards by raising write timeout
• optimize re-claiming: faster re-initialization of removed microSD
• put microSD before attempting to suspend
• vfs_cache_pressure up to 50 (less lags & lower battery consumption ?)
• some minor cypress (softkey) driver fixes (thanks to pawitp !)
• slightly raised readahead
• delay subsequent suspend attempts after non-successful prior attempts (save battery + reduce cpu load)
• TCP increase default initial receive window + congestion window to 10
• pm: fix enable ordering in resume
• synced with nightly #143/144
md5 checksums:
d7d825bf5e01b82122775952f95bd219 CAPTIVATE_NEO_17_r18_unpack-me.zip
7cb88fc6c10c0667eeec5baf1942ff7d GT-i9000_TELUS_NEO_17_r18_unpack-me.zip
7ae282d0e6d2c3e1e0b865f13a2aac35 VIBRANT_NEO_17_r18_unpack-me.zip