Remove All Ads from XDA
H10 Turbo

[Q] changing Button 3 (Camera) to <None>-need explanation

78 posts
Thanks Meter: 1
By zonetrichur, Member on 14th June 2011, 06:04 PM
Thread Deleted Email Thread
i have the files/steps to flash pharo p3470.steps as below
1. Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
2. Use 0x10000000 as Jump Address.
3. After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
You will get the grey background screen, you can flash any ROM to your device at this point.
In some case, you may need to unplug and then plug the USB cable again.
4. If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
After HardSPL, you will notice your SPL version change when boot;
From SPL 1.11.0001
To SPL 1.11Mobiz

""""""" To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you"""""
did not understand above sentence

-so can not flash-help me
thank u
Subscribe to Thread
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes