[DEV] The project to port Android(froyo) on S8500 (8530)
- Thread starter oleg_k
- Start date
-
- Tags
- wave s8500 android
- Status
i wonder if you press end call button for like 20secs if it still restarts...cant try because i havent android on my wave anymore.can someone just try?
E: answered question myself -after ca 10 seconds the display went out, after 20 seconds i released the button.wave is definitely off.but bada or android didnt start then...
btw root works indeed! and media rescan also
E: answered question myself -after ca 10 seconds the display went out, after 20 seconds i released the button.wave is definitely off.but bada or android didnt start then...
btw root works indeed! and media rescan also
Last edited:
Your firmware aren't supported, you have to use boot files for unsuported firmwares.
REad this thread http://xdaforums.com/showthread.php?t=1118436
Concerning sensors.. (I hope I can write this in this thread):
I noticed that every time I "use" Android on my Wave, and after I return to Bada.. Bada shows me that the battery is completely discharged. Since it has appened to me several time, I'm asking: every time was a sort of "coincidence" or really Android from his esternal SD manage to modify what Bada see after him? Will the definitive port have similar problem or someone of you have already fix it in one of his kernel?
Thanks in advance.
I noticed that every time I "use" Android on my Wave, and after I return to Bada.. Bada shows me that the battery is completely discharged. Since it has appened to me several time, I'm asking: every time was a sort of "coincidence" or really Android from his esternal SD manage to modify what Bada see after him? Will the definitive port have similar problem or someone of you have already fix it in one of his kernel?
Thanks in advance.
I think the problem is not boot files, but apps_compressed.bin
The link contains S8500XXJH2 bootloader that is supported by FOTA, but apps_compressed need to have the right header for the bootloader to run FOTA. It has been already described several times. You can try to use the small application I crafted (link). Flashing modified apps_compressed may not possible on new bootloaders, though.
@ sabianadmin
99 % of your posts are rude...
Why?
You are too long under direct sun... bad for brain.
You are 5 years, and your mom has no time for you...
Anyway.
Please be more friendly or write better nothing.
We are NOT idiots and I'm pretty sure you are not the smartest man on earth.
This forum is for ALL users.
If Questions allready answered, then maybe better help blind people and post Link to the answer.
Instead be childish and post bu..****.
Thanx for reading.
Best Regards
99 % of your posts are rude...
Why?
You are too long under direct sun... bad for brain.
You are 5 years, and your mom has no time for you...
Anyway.
Please be more friendly or write better nothing.
We are NOT idiots and I'm pretty sure you are not the smartest man on earth.
This forum is for ALL users.
If Questions allready answered, then maybe better help blind people and post Link to the answer.
Instead be childish and post bu..****.
Thanx for reading.
Best Regards
Cleaned again. Watching this thread again as well. So lets keep it dev related.
@all commiters:
I've deleted/deprecated all downloads I was sure about these won't be needed. Just ain't sure about all zImages and initramfs, I'm not staying tuned with tuts etc, so please take a look there and delete or deprecate unneeded files (I'll permanently remove most of deprecated ones with next maintenance, excluding the "milestones")
I've deleted/deprecated all downloads I was sure about these won't be needed. Just ain't sure about all zImages and initramfs, I'm not staying tuned with tuts etc, so please take a look there and delete or deprecate unneeded files (I'll permanently remove most of deprecated ones with next maintenance, excluding the "milestones")
It's ok for me. I've got everything upped at my site and on megaupload
i may have found the culprit of dhcp failing to work on my build (perhaps the tut build too), something we overlooked.
credit to srg for letting me know how to recreate hardlinks.
http://code.google.com/p/badadroid/issues/detail?id=24&can=1
This apparently fixed update services too.
credit to srg for letting me know how to recreate hardlinks.
http://code.google.com/p/badadroid/issues/detail?id=24&can=1
This apparently fixed update services too.
So...Umm...How do you get it to work?
I'm after that ATM. Just keep an eye for an Tut update
some progress
Two things:
- some progress with CM7: I was able to boot it into clockworkmod recovery but no normal boot. I'll test it later (end of next week)
- the camera keycode is 3(half pressed) and 8 (fully pressed) you can use them in s3c-keypad.kl
Seee you in a week!
Two things:
- some progress with CM7: I was able to boot it into clockworkmod recovery but no normal boot. I'll test it later (end of next week)
- the camera keycode is 3(half pressed) and 8 (fully pressed) you can use them in s3c-keypad.kl
Seee you in a week!
ok, i've made my moviNAND loopback kernel(using olegs kernel sources) , filesystem and scripts for autoconfig of loopback images available on googlecode, needs mijoma's recovery capable fota to run the scripts:
http://code.google.com/p/badadroid/...moviNANDloopback100711v2(public).zip&can=2&q=
http://code.google.com/p/badadroid/...viNANDLoopback100711v1public.zip.001&can=2&q=
http://code.google.com/p/badadroid/...viNANDLoopback100711v1public.zip.002&can=2&q=
this is the recovery capable fota by mijoma, currently has same bootloader version limitations as that used in shadow's tutorial.
http://code.google.com/p/badadroid/downloads/detail?name=bl_univ_boot100711_recov.zip&can=2&q=
EDIT: redid zImage slightly, removing old link.
EDIT2: please avoid creating posts asking about the build, joining IRC to discuss is preferred.
EDIT3: ignore errors that appear during recovery boot - they are inconsequentual to our android install, the script currently cannot write messages to the display and if its done right it will REBOOT/SHUTDOWN the phone on it's own after 2-5 minutes. If it doesn't reboot itself then once again check you put the "mkext2images.sh" script in the correct location:
http://s579.photobucket.com/albums/ss238/nbates66/?action=view¤t=scriptsexample.png the script will delete itself after it runs, once this is done you simply boot android normally
once again, do not create posts regarding this build please.
http://code.google.com/p/badadroid/...moviNANDloopback100711v2(public).zip&can=2&q=
http://code.google.com/p/badadroid/...viNANDLoopback100711v1public.zip.001&can=2&q=
http://code.google.com/p/badadroid/...viNANDLoopback100711v1public.zip.002&can=2&q=
this is the recovery capable fota by mijoma, currently has same bootloader version limitations as that used in shadow's tutorial.
http://code.google.com/p/badadroid/downloads/detail?name=bl_univ_boot100711_recov.zip&can=2&q=
EDIT: redid zImage slightly, removing old link.
EDIT2: please avoid creating posts asking about the build, joining IRC to discuss is preferred.
EDIT3: ignore errors that appear during recovery boot - they are inconsequentual to our android install, the script currently cannot write messages to the display and if its done right it will REBOOT/SHUTDOWN the phone on it's own after 2-5 minutes. If it doesn't reboot itself then once again check you put the "mkext2images.sh" script in the correct location:
http://s579.photobucket.com/albums/ss238/nbates66/?action=view¤t=scriptsexample.png the script will delete itself after it runs, once this is done you simply boot android normally
once again, do not create posts regarding this build please.
Last edited:
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
79Hi All.
It's my thread - port Android on Wave S8500(also S8530).
Wellcome developers and designers.
Last state of project:
06/13/2011 Now working on Android 2.3.3 (Source GB for GT-I9000 and M130K)
not working - modem and GPS.
04/04/2011 Memory allocation now is correct!
05/11/2011 I have full schematic for phone
and we're ready to get a fully working kernel.
Full decriptions of GPIO is attached.
source for kernel and initramfs here:
github.com/Oleg-k/S8500_Kernel_2.6.32
github.com/Oleg-k/initramfs_2.6.32_S850025ADB command line mode
Thanks to (in alphabetical order) Mijoma, Nbates66, Oleg_k, Rebellos, Srg.mstr (last but not least) now we have ADB command line mode (in recovery mode now).
For this we use only standard USB data cable:
0. For experts only who will not ask stupid questions in the future.
1. make kernel ( https://github.com/Oleg-k/initramfs_2.6.32_S8500 https://github.com/Oleg-k/S8500_Kernel_2.6.32 ) with modified initramfs/recovery.rc http://code.google.com/p/badadroid/source/browse/trunk/initramfs/recovery.rc?spec=svn179&r=179
2. create "galaxyboot" folder at internal mmc0 card and put there:
2.1 sbl.bin http://code.google.com/p/badadroid/downloads/detail?name=Sbl2FOTA_mijoma2.zip&can=2&q=#makechanges
2.2 zImage
3. create on external mmc2 primary FAT partitions p1, p2 and p3 ( <=1GB ). put there files from factoryfs.rfs > p1, dbdata.tar > p2, cache.rfs > p3.
4. make and upload to phone FOTA http://code.google.com/p/badadroid/source/browse/trunk/FOTA/kernel_boot_sbl.asm?r=179
5. connect USB to phone and hold POWER and CALL buttons.
6. after ~30sec reconnect USB and try to use $ ./adb shell20
Guys,good news!HI Everyone, any news regarding wave schematics???
I tried my best searching on net, but could'nt get anything relavent other than service manuals........
Today I got a schematic of main cpu, but due to security, I can't publish it now.
later i will publish gpio translation file for kernel after research.
