FORUMS
Remove All Ads from XDA

[Kernel]Atrix-GB/CM7/9[2.6.32.59/56/59](026/024/026)OC~1.45GHz/UV/SLQB/ZRAM[Jun-17]

8,535 posts
Thanks Meter: 34,722
 
Post Reply Email Thread
Here's an official build of a kernel based on Motorola Atrix source code for ATT
(Overclock via PimpMyCPU or SetCPU)

Just a statement regarding kernel source: The Kernel Source is of course covered under GPL version 2. Free software does NOT mean no work or time was spent working on it. I have donated a large sum of my free time to hack this kernel. If you use my modified kernel source in its entirety, I kindly ask you to send me a github pull request or PM whenever you find bugs or think you can help improve my kernel hack further. This way the entire community will truly benefit from the spirit of open source. Thank you



Compatible with: Rooted Stock, Debloated Stock ROMs and CM7 ROMs (Pick the correct version from below) Enjoy!


I have patched in BFQ I/O scheduler and SLQB memory allocator for better I/O and memory performance.

THIS IS ONLY FOR THOSE WHO ARE WILLING to LOAD THIS KERNEL ON THEIR OWN PHONES... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.




[ FROYO Kernel 2.6.32.9 ]

[<{ ATT OLYFR_U4_1.8.3 (Official ATT ONLY) }>]

[ Original Stock Kernel ]
The CWM File ==> ATT original Kernel Version <==

[ Overclock Kernel, Max @ 1.1 GHz ]
The CWM File ==> ATT FR Kernel Version 0.1.0n <==

[ GINGERBREAD (2.3.4/5/6) Kernel 2.6.32.59]

[<{ OLYGB_U4_5.9.1 (ATT, INTL Unified) }>]

[ Original Stock Kernel ]
The CWM File ==> ATT original Kernel Version <==
The CWM File ==> INTL mbr_d00 original Kernel Version <==
The CWM File ==> INTL mbr_1100 original Kernel Version <==

[ Overclock Kernel, Max @ 1.45 GHz version ]

The CWM File ==> Unified GB Kernel Version 026 @ 1.45 GHz <==
md5sum ==> <==

[ Overclock Kernel, Max @ 1.3 GHz ]

The CWM File ==> Unified GB Kernel Version 026 @ 1.3 GHz <==
md5sum ==> <==

[ Enhanced Stock Kernel, Max @ 1.0 GHz ]

The CWM File ==> Unified GB Kernel Version 026 @ 1.0 GHz <==
md5sum ==> <==

[ CYANOGENMOD 7 Kernel 2.6.32.56 ]

[<{ CyanogenMod 7 (ATT, INTL Unified) }>]

[ Original Stock Kernel ]
The CWM File ==> cyanogenmod kernel <==

[ Overclock Kernel, Max @ 1.45 GHz ]

The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.45 GHz <==
md5sum ==> <==

[ Overclock Kernel, Max @ 1.3 GHz ]

The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.3 GHz <==
md5sum ==> <==

[ Enhanced Stock Kernel, Max @ 1.0 GHz ]

The CWM File ==> Unified CM7 Kernel Version 024_r2 @ 1.0 GHz <==
md5sum ==> <==

[ CYANOGENMOD 7 Kernel 2.6.32.56 ]

[<{ CyanogenMod 9 (ATT, INTL Unified) }>]

[ Original Stock Kernel ]
The CWM File ==> cyanogenmod kernel <==

[ Overclock Kernel, Max @ 1.45 GHz ]

The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.45 GHz <==
md5sum ==> <==

[ Overclock Kernel, Max @ 1.3 GHz ]

The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.3 GHz <==
md5sum ==> <==

[ Enhanced Stock Kernel, Max @ 1.0 GHz ]

The CWM File ==> Unified CM9 Kernel Version 026 beta 1 @ 1.0 GHz <==
md5sum ==> <==

[ Installation procedure: ]

[ CWM Method ]
1. reboot to CWM
2. Clear cache
3. install zip from SDcard
4. Reboot

DONE!

[ Bulletin: ]

Version 0.2.3 is OUT!

CIFS+UTF-8... check out CIFS Manager from fellow XDA Developer


[ Bugs: ]

[<{ ATT OLYFR_U4_1.8.3 }>]
None So far....

[<{ ATT OLYGB_U4_5.9.1 }>]
None So far....

[<{ CyanogenMod }>]
webtop issues

[ Change History: ]

See 2nd Post!


Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!


My github in Compliance with GPL
Attached Thumbnails
Click image for larger version

Name:	screen_20110710_1253.jpg
Views:	36694
Size:	27.0 KB
ID:	650948   Click image for larger version

Name:	screen_20110710_1250.jpg
Views:	40151
Size:	30.9 KB
ID:	650949   Click image for larger version

Name:	screen_20110711_2244.jpg
Views:	32941
Size:	26.0 KB
ID:	652244   Click image for larger version

Name:	screen_20110711_2257.jpg
Views:	32180
Size:	33.2 KB
ID:	652245   Click image for larger version

Name:	screen_20110711_2258.jpg
Views:	30438
Size:	26.2 KB
ID:	652246   Click image for larger version

Name:	screen_20110711_2325.jpg
Views:	32048
Size:	30.8 KB
ID:	652276   Click image for larger version

Name:	screen_20110712_2219.jpg
Views:	35158
Size:	25.3 KB
ID:	653301  
The Following 350 Users Say Thank You to faux123 For This Useful Post: [ View ] Gift faux123 Ad-Free
 
 
6th July 2011, 05:44 AM |#2  
[ History: ]

Version 0.0.1 (deprecated)

Added FakeShmoo OC/UV
Compiled with Tegra2 specific VFP optimizations, Tegra2 specific optimizations
Added BFQ I/O Scheduler
Added SLQB memory allocator
Added EXT4 support (NOT ENABLED YET)
Added CIFS + UTF-8 support (for windows shares)
Added TUN/TAP support directly
Added FUSE (file system in user space)
Added AVP overclock (system bus)
Merged WiFi Module into kernel source tree

Version 0.0.2 (deprecated)

Compiled with 1.5.7 config

Version 0.0.3 (deprecated)

Reduced CPU Freq/Voltage table from 7 to 6 slots
Adjusted CPU Freq/Voltage table

Version 0.0.4 (deprecated)

Updated Freq Table to allow for 1.2 GHz OC
Updated WiFi module compilation flags

Version 0.0.5 (deprecated)

Revert "Updated Freq Table to allow for 1.2 GHz OC"

Version 0.0.6 (deprecated)

Re-base on MT870's 2.3.4 Kernel Hack (Credit to edgan for point this out!)
Preserved all previous patches except WiFi (No WiFi module included!)

Version 0.0.7 (deprecated)

Fixed a patch error... Oops... (DOH!)

Version 0.0.8 (deprecated)

Revert back to SLUB from SLQB

Version 0.1.0n (Long Term Stable Release, FR)

[{< OLYFR_U4_1.8.3 >}] (ATT)
Based on latest ATT source OLYFR_U4_1.8.3
Enabled SLQB again
Working WiFi Moudle (Finally)
Overclocking Works! (Finally, use SetCPU latest version)

Version 0.1.1_r2 (deprecated)

Based on latest MT8710 source for China Market
Re-Introducing EXT4 File system
(the file system is formatted as EXT3, but mounted as EXT4. 100% BACKWARDS COMPATIBLE with EXT3)

Overclock option for 1.2 GHz, but system only allows up to 1.1 GHz for now
init.rc optimization

Version 0.1.2 (deprecated, GB)

Cleaned up FakeShmoo Overclocking code in general for future updates
Overclocked 3D engine (350 MHz)
Overclocked SDRAM from 300MHz to 333MHz
Overclocked AVP further (280 MHz)
Enabled Undervolting Support in SetCPU to allow for User Undervolt

Version 0.1.3 (deprecated, GB)

Based on Official Motorola U4_5.91 Source Code Release

Version 0.1.4 (deprecated, CM7)

Based on Official Motorola U4_5.91 Source Code Release
Patched to Linux Kernel 2.6.32.39

Version 0.1.6 (deprecated, GB/CM)

Boot time command line ATAG fix up for all tegra parts. (Thanks to Eval- for patching this )

Version 0.1.7 (deprecated, GB/CM7)

Fixed minor code error in overclocking

Version 0.1.8 (deprecated, GB/CM7)

Introducing 1.3 GHz Overclock :androidwink:
ARM optimized spinlock
THUMP-EE enabled

Version 0.1.9 (deprecated, GB/CM7)

Tweaked voltage table for better 1.3 GHz stability

Version 0.2.0 (deprecated, GB/CM7)

Added AVP processor suspend (this will greatly improve battery life)
Added Fixes from the new Photon 4G source code
Added ARM SWP/SWPB instructions back
Added Several Power management patches
Added CPU sibling code for setting cpu policies for 2nd CPU
Added JHash3
Added 1.0 GHz stock clock
Added RCU optimization

Version 0.2.1 (deprecated, GB/CM7)

Optimized memcpy and memmove
Optimized CRC32 and CRC32c
Updated Binder to latest AOSP version
Updated Low Memory Killer to latest AOSP version
Increased OC to 1.45 GHz stable

Version 0.2.2 (deprecated, GB/CM7)

cpufreq: fix cpu freq issues
block: limit default readahead size for small devices
PM / Suspend: Fix bug in suspend statistics update
mm/vmalloc.c: eliminate extra loop in pcpu_get_vm_areas error path
lockdep: print lock name for lockdep_init_error
init/main.c: execute lockdep_init as early as possible
[PATCH] Input: introduce device properties
[PATCH] input: mt: Add hovering distance axis
input: mt: Break out slots handling
Input: introduce MT event slots
USB: f_mass_storage: Disable write cache support
kernel:sched: LOAD_FREQ (4*HZ+61) avoids loadavg Moire
sched: don't call task_group() many times in set_task_rq()
compilation: clean up most warning messages during compile
PM: wakelocks: Don't report wake up wakelock if suspend aborted
aes1750: Suspend fingerprint sensor earlier
rtc alarm: fix bad index when canceling alarms[]
kernel patch: 2.6.32.47 -> 2.6.32.48
mmc:core: revert to pre-2.6.32.40 mmc driver
irq: fix build error due to missing irq_pm_syscore_resume
kernel patch: 2.6.32.9 -> 2.6.32.47
ARM: support XZ compressed kernels
decompressors: add boot-time XZ support
decompressors: add XZ decompressor module
arm: Allow CPU-supported unaligned accesses
PM: wakelocks: Display wakelocks preventing suspend by default
mmc: core: put eMMC in sleep (cmd5) mode before suspend
staging:lowmemkiller add Fudgeswap
Staging:zram: Specify default disksize via menuconfig (in bytes)
zram: Set initial disksize to some default value
zram: Simplify zram disk resizing interface
zram: Kernel config option for number of devices
Staging:ZRAM: Make default zram allocation configurable via menuconfig
zram: Fix sparse warnings
swap: Add swap slot free callback to block_device_operations
Add zram driver


Version 0.2.3 (Short Term Release, GB/CM7)

The CWM File ==> Unified GB Kernel Version 023 @ 1.45 GHz <==
The CWM File ==> Unified GB Kernel Version 023 @ 1.3 GHz <==
The CWM File ==> Unified GB Kernel Version 023 @ 1.0 GHz <==
The CWM File ==> Unified CM7 Kernel Version 023 @ 1.45 GHz <==
The CWM File ==> Unified CM7 Kernel Version 023 @ 1.3 GHz <==
The CWM File ==> Unified CM7 Kernel Version 023 @ 1.0 GHz <==

Fixed Various Gaming issues including Plants Vs Zombies
Fixed Webtop issues (GB version only!)
kernel.h: Add BUILD_BUG() macro.
hugetlb: Replace BUG() with BUILD_BUG() for dummy definitions.
ARM: Add optimised swahb32() byteswap helper for v6 and above
sched/rt: code cleanup, remove a redundant function call
PM / Sleep: Unify diagnostic messages from device suspend/resume
PM / Sleep: Drop pm_op() and pm_noirq_op()
mm: retry page fault when blocking on disk transfer
kernel patch: 2.6.32.48 -> 2.6.32.49
kernel patch: 2.6.32.49 -> 2.6.32.50
overclock: fix freq table derpage at nvrm_clocks_limits.c
PM / Sleep: fixed coding derp from "Drop pm_op() and pm_noirq_op()"

Version 024 (Current, GB/CM7)

switched to fast NoHz tree RCU
Completely rebuilt from scratch based on ATT 4591 baseline
Both Stock and Cyanogen now share the same baseline code base
Patched to latest kernel.org 2.6.32.56
Fixed some warnings during compilation
enabled NETFILTER_XT_MATCH_MAC (for wifi tethering app users)
arm/vfp: vfp_pm_suspend: Use local variable instead of rereading from register
ARM: vfp: clear fpscr length and stride bits on entry to sig handler
ARM: vfp: move user vfp state save/restore code out of signal.c
ARM: vfp: flush thread hwstate before restoring context from sigframe
crc32: Don't reference unnecessary crc32 tables in single-bit mode
ARM: proc-v7.S: remove HARVARD_CACHE preprocessor guards
ARM: net: JIT compiler for packet filters enabled by default
ARM: net: JIT compiler for packet filters
include/filter.h: add missing rcu_types.h for kernel usage
ARM: hwcaps: add new HWCAP defines for ARMv7-A
ARM: hwcaps: use shifts instead of hardcoded constants
mmc: fix deadlock from mmc core when suspend the device
mmc: change mmc_delay() to use usleep_range()
nohz: Remove ts->inidle checks before restarting the tick

Version 026 (Current, GB/CM9)

Incorporated kernel code fix up from Epsylon3
Incorporated kernel code fix up from LGE's v21y kernel source drop
Updated to mainline 2.6.32.59
Incorporated few patches from Android Common
Enabled Early Suspend/Late Resume driver for cpufreq to limit max screen off frequency
-- While Screen is OFF
---- CPU is limited to 503MHz max and 2nd core taken offline.
Enabled kernel version of memcpy instead of userspace copy (to use more efficient kernel memcpy routines)


Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!


My github in Compliance with GPL
The Following 70 Users Say Thank You to faux123 For This Useful Post: [ View ] Gift faux123 Ad-Free
6th July 2011, 05:44 AM |#3  
Reserved 2... maybe
The Following 30 Users Say Thank You to faux123 For This Useful Post: [ View ] Gift faux123 Ad-Free
6th July 2011, 05:48 AM |#4  
Senior Member
Thanks Meter: 175
 
More
Awesome! Thanks for sharing this!!
The Following User Says Thank You to bongd For This Useful Post: [ View ] Gift bongd Ad-Free
6th July 2011, 05:52 AM |#5  
firefox3's Avatar
Senior Member
Flag no where of your consern
Thanks Meter: 15
 
More
Quote:
Originally Posted by faux123

Here's an official build of a kernel based on ATT Atrix Stock FROYO source code (v1.2.6) with FakeShmoo UV/OC hack by Cpasjuste
(Overclock via PimpMyCPU or SetCPU)

Compatible with: Rooted Stock, Debloated Stock FROYO ROMs Enjoy!


I have patched in BFQ I/O scheduler and SLQB memory allocator for better I/O and memory performance.

THIS IS ONLY FOR THOSE WHO ARE WILLING to BETA TEST THIS ON THEIR OWN PHONE... IF YOU ARE NOT COMFORTABLE WITH THIS YOU SHOULD NOT FLASH THIS.




[ Files: ]

[ Start @ 1.1 GHz, Under Volt, Max @ 1.5 GHz ]
Coming Soon

[ Start @ 1.0 GHz, Stock Voltage, Max @ 1.2 GHz ]
The File ==> ATT Stock Voltage Kernel Version 0.0.1 <==


[ Installation procedure: ]

1. reboot to CWM
2. Clear cache
3. install zip from SDcard
4. Reboot

DONE!

[ Bulletin: ]

Version 0.0.1 is out. This is a first release for ATT Froyo!


[ Bugs: ]

Don't Know yet...

[ History: ]

Version 0.0.1 (BETA)

Added FakeShmoo OC/UV
Compiled with Tegra2 specific VFP optimizations, Tegra2 specific optimizations
Added BFQ I/O Scheduler
Added SLQB memory allocator
Added EXT4 support
Added CIFS + UTF-8 support
Added TUN/TAP support directly
Added AVP overclock
Merged WiFi Module into kernel source tree

Standard Disclaimer: Not responsible for bricking your phone, voiding your warranty, or any other pain or suffering you may feel as result of using this ROM or Kernel!!!


My github in Compliance with GPL

i
love
you
6th July 2011, 06:03 AM |#6  
Member
Thanks Meter: 2
 
More
Faux123 the big boss wohooo
Now are the atrix revolution.....
Sent from my MB860 using XDA Premium App
6th July 2011, 06:20 AM |#7  
darkamikaze's Avatar
Senior Member
Flag Candyland
Thanks Meter: 174
 
More
ext4? mmm.. i might just go back from gb..
6th July 2011, 06:20 AM |#8  
Senior Member
Thanks Meter: 20
 
More
Great work
6th July 2011, 06:28 AM |#9  
the2dcour's Avatar
Senior Member
Flag Boston
Thanks Meter: 590
 
Donate to Me
More
not going to ever make faux123 jokes, I know better than to make fun of devs that release stuff that works (regardless if it is buggy).
6th July 2011, 06:32 AM |#10  
kennethpenn's Avatar
Retired Forum Moderator / Retired Recognized Developer
Flag Washington, D.C.
Thanks Meter: 3,811
 
Donate to Me
More
Three kernels in one week. The only week that beat this one was... erm... last week when Motorola unlocked our bootloaders.
The Following 3 Users Say Thank You to kennethpenn For This Useful Post: [ View ] Gift kennethpenn Ad-Free
6th July 2011, 06:41 AM |#11  
lurchbyrep's Avatar
Senior Member
Flag Pocatello, ID
Thanks Meter: 46
 
More
Brickity-bricks on one-two-six! Hurry, hurry quick and bring me a fix! (That is, for the kernel, not for the bricks).
Post Reply Subscribe to Thread

Tags
ext4, faux123, if youfindthisconfusiongogetaniphone, kernel, mjpollardisagirl, overclock

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes