Woow Andre, when you started your first post I thought you already go through the hardspl stuff, if you read that tutorial you can see where it went wrong if you only used sspl you should be able to flash your phone, the only difference is that you need to use sspl everytime you wanna flash another rom.
Okay, let's see if we can bring back your phone.
1. Tell me what you read in the boatloader, the 4 coloured screen.
Only make a note of that, and continuing with the following steps.
2. Remove battery, wait a few minutes.
3. Insert battery.
4. Do a hardreset.
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
Just let me know how it goes.
Greetz,
Okay, let's see if we can bring back your phone.
1. Tell me what you read in the boatloader, the 4 coloured screen.
Only make a note of that, and continuing with the following steps.
2. Remove battery, wait a few minutes.
3. Insert battery.
4. Do a hardreset.
To perform a hard reset on a device that is not responding to input or not booting to Windows, first remove the back cover of the device. Hold the "call" and "end call" keys on the front of the device and reset the device by sticking the stylus into the small hole to the left side of the USB port. The device will ask for confirmation. To confirm, press the "Enter" key on the keypad. On some devices you need to press the "Action" key instead of "Enter".
Just let me know how it goes.
Greetz,
