•GB SENSE Kernel 2.6.35 Desire Official (Overclocked & Undervolted)
•Max 1190Mhz
•Vdd Levels
•minimum voltage@950mV
•maximum voltage@1325mV
•BFQ/VR Scheduler
•Pershoot's audiomod (loudness).
•EXT4
•CIFS
•2 way call recording(avs333)
•ondemand, interactive, conservative, powersave, performance, Smartass & Smartass V2, smoothass, savagedzen cpufreq governors
CAUTION:
flash the new kernel with wiping your dalvik cache.
then reset your voltages
************************************************
0.9
*CPUIDLE code from 36.1 (by Imoseyon)
*CPUIDLE code from 3.0rc6 kernel
*Make cpuidle_enable_device() call poll_idle_init()
*delete NOP CPUIDLE_FLAG_POLL
*Export file system uuid via procpidmountinfo
*msm smd display correct error message upon modem crash
*bfs_ck2_patch
*Delete float charge after 90%
*FIX v7_coherent_user_range from the galaxy s kernel
*Tweaked BFS
*ADD: BLOCK driver backportefrom 2.6.36.1 kernel (by Imoseyon)
*ADD: I2C driver backported from 2.6.36.1 kernel (by Imoseyon)
*lib/sha1 use the git implementation of SHA-1
*arm remove optimized SHA1 routines
*tweaks lazy govenor
*Add compile optimizations
*Update BFS to V413 for kernel 3.0 – modified for DHD by LorD ClockaN
*tweaks ondemand govenor
*Lower the batt power limit for disabling flashlightflash from 15 to 10% – leedroid
*Tuning the conservative governor to behave a bit better for performance – netarchy
*Decrease maximum transition latency of smartassV2 when Scorpion CPU is detected – intersectRaven
*bfs: penalise fork depth account threads
*posix-timers RCU conversio
*ext4 add cleancache support
*init/calibrate.c backport from 3.0
*Fixed ext4 disk write performance regression
*mm Tweak Pagewriteback
*ARM Stop irqsoff trace on return to user
*wait Add wait_io_event_interruptible
************************************************
************************************************
0.8f-21/10/11
*Tweak VR for flash devices
*read to write ratio for deadline io, more like noop
*synaptics: added CONFIG_TOUCHSCREEN_DUPLICATED_FILTER
*net: wireless: bcm4329: convert sempahore mutexes to real mutexes [Dima Zavin]
*msm kgsl Reduce the wait for gpu ready time to 10 ms
*USB: f_mass_storage: Disable write cache support
*cgroup: remove the ns_cgroup
*default ADD: TINY_PREEMPT_RCU
*move TINY_RCU from softirq to kthread
*priority boosting for TINY_PREEMPT_RCU
*add tracing for TINY_RCU and TINY_PREEMPT_RCU
*document TINY_RCU and TINY_PREEMPT_RCU tracing
*Added usleep_range timer as it's needed for JRCU to compile, added #if defind so only used when compiling with JRCU
*cpufreq and omap transition latency tweaks
*delay going tickless when CPU is loaded
*bfs: Added support for custom rr_interval value
*Improve the performance of memcpy and memmove of the general version
*CFS Scheduler tweaks brought over
*EXPORT nr_running for modules such as smartass governor
*Use a realtime priority thread for AVS
*mm: vmap area cache
*Ondemand governor tweaking
*rcutorture add random preemption
*call __rcu_read_unlock() in exit_rcu for tiny RCU
*MSM: Fix memory leak in mdp_probe
*rcu: optimize rcutiny
*lowmemorykiller: Don't try to kill the same pid over and over
************************************************
~0.8e
*BFQ I/O Scheduler
*WIFI PM=FAST in standby
*MSM HW 3D Register Driver
*sysfs VDD levels interface
*Smartass & Interactive cpufreq governors
*Extended CPU Vdd levels sysfs iface
*Add: Trackpad to wakeunlock
*Add: 2 way call recording support
*83mhzfors5k3e2fx
*Battfix- sibere
*TWEAK: sched - lower granularity
*Allow CPU-supported unaligned accesses
*TWEAK: camera - bananacakes
*VR I/O Scheduler
vshorter switch times
*USB mount issue in 2.3.4(5)
vdrivers/leds/leds-microp: workaround to make -Wswitch happy
*Add: cpufreq
*TWEAK: GPU MEM SIZE
*cm3602_lightsensor_microp: report last value until sensor becomes ready...- tobi01001 & snq-
*supported OC/UV Beater, incredible controls..
*Increase write data timeout value for bad SDHC cards
*lowered wifi to connect a low signal -108
*atomic functions in bfq
*allocate uncached buffers as writecombined
*Fixed: fgets compile
*CA tweaks for fs
*CAF patches
*Add: Jhash3
*Update: Linux upstream 2.6.35.10 > 2.6.35.13
*The Brain **** Scheduler v0.404 by Con Kolivas
*Update to linux upstream 2.6.35.14
*instead of nuking clockd (snq-)
*ADD float charge after 90%
*mm Avoid livelocking of WB_SYNC_ALL writeback
*Fix a race during freezing of TASK_STOPPED tasks
* Add JRCU by Joe Korty(not enable)
*mmc: core: put eMMC in sleep (cmd5) mode before suspend
*HAVS/SVS/CFS/BFS/2WAY/NO2WAY
************************************************
incrementing/decrementing all levels by a specified amount* (mV):
Default output: first column: frequency (kHz), second column: vdd* (mV))
Thanks to coolexe,-snq,Alex,Flohim,llimscap1,sibere,tristan202,
Richard trip, eviollet
http://cafe.naver.com/htc.cafe
and many people.. and many korean bro.
Special Thanks My lover.
Download:
cooldevs
Donation
If You Like My Work Then vote Thread or Some reply or Checking Thanks
and Don't forget This(Dok-Do is a territory of Korea. Dok-do is Korean land.)
--------------------------------------------------------------------------
How about sharing our knowledge about building kernel?
It would be better than hiding the kernel source.
As you know, We alone cannot even make a development when everyone of community keep hiding.
source for kernel compile
my github
---------------------------------------------------------------------------
I'm not so good at English. sorry
•Max 1190Mhz
•Vdd Levels
•minimum voltage@950mV
•maximum voltage@1325mV
•BFQ/VR Scheduler
•Pershoot's audiomod (loudness).
•EXT4
•CIFS
•2 way call recording(avs333)
•ondemand, interactive, conservative, powersave, performance, Smartass & Smartass V2, smoothass, savagedzen cpufreq governors
CAUTION:
flash the new kernel with wiping your dalvik cache.
then reset your voltages
************************************************
0.9
*CPUIDLE code from 36.1 (by Imoseyon)
*CPUIDLE code from 3.0rc6 kernel
*Make cpuidle_enable_device() call poll_idle_init()
*delete NOP CPUIDLE_FLAG_POLL
*Export file system uuid via procpidmountinfo
*msm smd display correct error message upon modem crash
*bfs_ck2_patch
*Delete float charge after 90%
*FIX v7_coherent_user_range from the galaxy s kernel
*Tweaked BFS
*ADD: BLOCK driver backportefrom 2.6.36.1 kernel (by Imoseyon)
*ADD: I2C driver backported from 2.6.36.1 kernel (by Imoseyon)
*lib/sha1 use the git implementation of SHA-1
*arm remove optimized SHA1 routines
*tweaks lazy govenor
*Add compile optimizations
*Update BFS to V413 for kernel 3.0 – modified for DHD by LorD ClockaN
*tweaks ondemand govenor
*Lower the batt power limit for disabling flashlightflash from 15 to 10% – leedroid
*Tuning the conservative governor to behave a bit better for performance – netarchy
*Decrease maximum transition latency of smartassV2 when Scorpion CPU is detected – intersectRaven
*bfs: penalise fork depth account threads
*posix-timers RCU conversio
*ext4 add cleancache support
*init/calibrate.c backport from 3.0
*Fixed ext4 disk write performance regression
*mm Tweak Pagewriteback
*ARM Stop irqsoff trace on return to user
*wait Add wait_io_event_interruptible
************************************************
************************************************
0.8f-21/10/11
*Tweak VR for flash devices
*read to write ratio for deadline io, more like noop
*synaptics: added CONFIG_TOUCHSCREEN_DUPLICATED_FILTER
*net: wireless: bcm4329: convert sempahore mutexes to real mutexes [Dima Zavin]
*msm kgsl Reduce the wait for gpu ready time to 10 ms
*USB: f_mass_storage: Disable write cache support
*cgroup: remove the ns_cgroup
*default ADD: TINY_PREEMPT_RCU
*move TINY_RCU from softirq to kthread
*priority boosting for TINY_PREEMPT_RCU
*add tracing for TINY_RCU and TINY_PREEMPT_RCU
*document TINY_RCU and TINY_PREEMPT_RCU tracing
*Added usleep_range timer as it's needed for JRCU to compile, added #if defind so only used when compiling with JRCU
*cpufreq and omap transition latency tweaks
*delay going tickless when CPU is loaded
*bfs: Added support for custom rr_interval value
*Improve the performance of memcpy and memmove of the general version
*CFS Scheduler tweaks brought over
*EXPORT nr_running for modules such as smartass governor
*Use a realtime priority thread for AVS
*mm: vmap area cache
*Ondemand governor tweaking
*rcutorture add random preemption
*call __rcu_read_unlock() in exit_rcu for tiny RCU
*MSM: Fix memory leak in mdp_probe
*rcu: optimize rcutiny
*lowmemorykiller: Don't try to kill the same pid over and over
************************************************
~0.8e
*BFQ I/O Scheduler
*WIFI PM=FAST in standby
*MSM HW 3D Register Driver
*sysfs VDD levels interface
*Smartass & Interactive cpufreq governors
*Extended CPU Vdd levels sysfs iface
*Add: Trackpad to wakeunlock
*Add: 2 way call recording support
*83mhzfors5k3e2fx
*Battfix- sibere
*TWEAK: sched - lower granularity
*Allow CPU-supported unaligned accesses
*TWEAK: camera - bananacakes
*VR I/O Scheduler
vshorter switch times
*USB mount issue in 2.3.4(5)
vdrivers/leds/leds-microp: workaround to make -Wswitch happy
*Add: cpufreq
*TWEAK: GPU MEM SIZE
*cm3602_lightsensor_microp: report last value until sensor becomes ready...- tobi01001 & snq-
*supported OC/UV Beater, incredible controls..
*Increase write data timeout value for bad SDHC cards
*lowered wifi to connect a low signal -108
*atomic functions in bfq
*allocate uncached buffers as writecombined
*Fixed: fgets compile
*CA tweaks for fs
*CAF patches
*Add: Jhash3
*Update: Linux upstream 2.6.35.10 > 2.6.35.13
*The Brain **** Scheduler v0.404 by Con Kolivas
*Update to linux upstream 2.6.35.14
*instead of nuking clockd (snq-)
*ADD float charge after 90%
*mm Avoid livelocking of WB_SYNC_ALL writeback
*Fix a race during freezing of TASK_STOPPED tasks
* Add JRCU by Joe Korty(not enable)
*mmc: core: put eMMC in sleep (cmd5) mode before suspend
*HAVS/SVS/CFS/BFS/2WAY/NO2WAY
************************************************
incrementing/decrementing all levels by a specified amount* (mV):
Code:
echo -min_voltage +max_voltage > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs
ex)echo -25 +25 > /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs
Default output: first column: frequency (kHz), second column: vdd* (mV))
Code:
cat /sys/devices/system/cpu/cpu0/cpufreq/vdd_levels_havs
Thanks to coolexe,-snq,Alex,Flohim,llimscap1,sibere,tristan202,
Richard trip, eviollet
http://cafe.naver.com/htc.cafe
and many people.. and many korean bro.
Special Thanks My lover.
Download:
cooldevs
Donation
If You Like My Work Then vote Thread or Some reply or Checking Thanks
and Don't forget This(Dok-Do is a territory of Korea. Dok-do is Korean land.)
--------------------------------------------------------------------------
How about sharing our knowledge about building kernel?
It would be better than hiding the kernel source.
As you know, We alone cannot even make a development when everyone of community keep hiding.
source for kernel compile
my github
---------------------------------------------------------------------------
I'm not so good at English. sorry
Last edited: