After installing CM7, everything works perfectly. However, when I either reboot to Recovery or WebOS, it keeps going back into CM7.
Any idea what I did wrongly ?
[EDIT] Missing Moboot steps !
I get a "the system can not find the specified file" error. in CMD i have been typing
“C:\Program Files\Palm, Inc\novacomd” boot mem:// < ACMEInstaller (for some reason my novacom folder has a d at the end. I have tried moving the installer and I have no luck. anyone have any ideas?
don't use novacomd folder
go to the root of the novacom file folder
then type novacom boot mem:// < ACMEInstaller in cmd
the installer should start afterward
currently waiting on install and looking at clock dg_timer, alarm already expired so just waiting to see what happens afterward
don't use novacomd folder
go to the root of the novacom file folder
then type novacom boot mem:// < ACMEInstaller in cmd
the installer should start afterward
currently waiting on install and looking at clock dg_timer, alarm already expired so just waiting to see what happens afterward
i put the gapps file in with mboots and update...zip and it installed it all at once.
The ACMEInstaller is located in Palm, Inc along with the novacom app. i still get the same error. I am stumped
Heres what I am doing:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>"C:\Program Files\Palm, Inc\novacom" boot mem:// < ACMEInsta
ller
The system cannot find the file specified.
C:\Windows\system32>novacom boot mem:// < ACMEInstaller
The system cannot find the file specified.
C:\Windows\system32>
cd\
cd Program Files\Palm, Inc
novacom boot mem:// < ACMEInstaller
INSTRUCTIONS
1. Boot your TouchPad into WebOS.
2. Connect your TouchPad to your computer with a USB cable. (Mac, Windows, or Linux work fine.)
3. On WebOS, you should be notified that you are "Connected" via USB. Select "USB Drive" and then, if asked, select "OK" to confirm.
4. A USB icon should appear on your screen, and the TouchPad WebOS volume should now be accessible on your computer. Depending on your OS, an icon for the HP WebOS volume may appear on your desktop.
5. Using your computer, create a folder/directory on the HP WebOS device called "cminstall" in the first folder. Download the following files and copy them to that folder (DO NOT unzip these files)
http://moboot.googlecode.com/files/moboot_0.3.3.zip
http://goo-inside.me/roms/cmtouchpad/alpha1/update-cm-7.1.0-tenderloin-a1-fullofbugs.zip
http://goo-inside.me/roms/cmtouchpad/alpha1/update-cwm_tenderloin-1012.zip
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
6. Unmount the TouchPad volume from usb mode. Leave the Touchpad plugged in via USB.
7. Reboot the TouchPad. As it is booting, hold the volume-up key until a large white USB symbol appears.
8. If you have installed Preware using WebOS quick install, you should have novacom on your PC already in C:\Program Files\Palm, Inc
If you don't have it on your PC, you will need to download WebOS quick install here and run it on your PC to install novacom: http://forums.precentral.net/canuck-coding/274461-webos-quick-install-v4-2-3-a.html
Dowload the ACMEInstaller here: http://goo-inside.me/roms/cmtouchpad/alpha1/ACMEInstaller.zip
Unzip the file to the C:\Program Files\Palm, Inc
Open a command window, navigate to that folder and run novacom boot mem:// < ACMEInstaller
9. Cross your fingers.
10. If all works well, CM will automatically be installed and your TouchPad should boot into Cyanogenmod.
The ACMEInstaller is located in Palm, Inc along with the novacom app. i still get the same error. I am stumped
Heres what I am doing:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>"C:\Program Files\Palm, Inc\novacom" boot mem:// < ACMEInsta
ller
The system cannot find the file specified.
C:\Windows\system32>novacom boot mem:// < ACMEInstaller
The system cannot find the file specified.
C:\Windows\system32>
People need some DOS lessons. You need to navigate to the C:\Program Files\Palm, Inc\ folder, and then type the command.
Code:cd\ cd Program Files\Palm, Inc novacom boot mem:// < ACMEInstaller
(Hit enter after each of those lines)
Alternatively, you can navigate to the C:\Program Files\Palm, Inc\ folder in windows explorer, hold down shift and right click in the folder, then click Open Command Window Here. Then: novacom boot mem:// < ACMEInstaller
Here are some instructions that I created for a friend:
The ACMEInstaller is located in Palm, Inc along with the novacom app. i still get the same error. I am stumped
Heres what I am doing:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>"C:\Program Files\Palm, Inc\novacom" boot mem:// < ACMEInsta
ller
The system cannot find the file specified.
C:\Windows\system32>novacom boot mem:// < ACMEInstaller
The system cannot find the file specified.
C:\Windows\system32>
cd\
cd Program Files\Palm, Inc
novacom boot mem:// < ACMEInstaller
INSTRUCTIONS
1. Boot your TouchPad into WebOS.
2. Connect your TouchPad to your computer with a USB cable. (Mac, Windows, or Linux work fine.)
3. On WebOS, you should be notified that you are "Connected" via USB. Select "USB Drive" and then, if asked, select "OK" to confirm.
4. A USB icon should appear on your screen, and the TouchPad WebOS volume should now be accessible on your computer. Depending on your OS, an icon for the HP WebOS volume may appear on your desktop.
5. Using your computer, create a folder/directory on the HP WebOS device called "cminstall" in the first folder. Download the following files and copy them to that folder (DO NOT unzip these files)
http://moboot.googlecode.com/files/moboot_0.3.3.zip
http://goo-inside.me/roms/cmtouchpad/alpha1/update-cm-7.1.0-tenderloin-a1-fullofbugs.zip
http://goo-inside.me/roms/cmtouchpad/alpha1/update-cwm_tenderloin-1012.zip
http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
6. Unmount the TouchPad volume from usb mode. Leave the Touchpad plugged in via USB.
7. Reboot the TouchPad. As it is booting, hold the volume-up key until a large white USB symbol appears.
8. If you have installed Preware using WebOS quick install, you should have novacom on your PC already in C:\Program Files\Palm, Inc
If you don't have it on your PC, you will need to download WebOS quick install here and run it on your PC to install novacom: http://forums.precentral.net/canuck-coding/274461-webos-quick-install-v4-2-3-a.html
Dowload the ACMEInstaller here: http://goo-inside.me/roms/cmtouchpad/alpha1/ACMEInstaller.zip
Unzip the file to the C:\Program Files\Palm, Inc
Open a command window, navigate to that folder and run novacom boot mem:// < ACMEInstaller
9. Cross your fingers.
10. If all works well, CM will automatically be installed and your TouchPad should boot into Cyanogenmod.