I will no longer be updating this guide, to keep up to date with the project please see the App thread HERE. The Free app can be downloaded HERE and the Paid HERE
First and for most this guide has been created from a mixture of a few guides to get it all working on the tablets, I do not take any credit for the methods all I have done is taken the time to work out how to get it working on our tablet. This guide is for windows or can be done all on the tablet. Anyway on with the guide
How To Install Ubuntu on the Desire S
Before we start you will need a ROM and kernel that supports loop devices.
This works best on UrukDroid but may well work on stock roms, due to the lack of RAM ubuntu isn't very fast but everything works unlike running it outside of ubuntu.
It is also recommend that you have the Android SDK install so that you can access adb however all commands can be done on the tablet via the terminal emulator
Also make sure that you have debugging mode enabled Go to Settings->Applications->Development and make sure USB Debugging is checked ON.
You will also need atleast 3.5GB of memory card space
Download and extract ubuntu.zip
Once you have a working ROM with loop support you must now download the special modified ubuntu image. I have hosted the file on my own server however if this is not quick enough feel free to mirror it or message me and I shall host else where as well.
There are now three versions to use as you wish, however the new 10.10 image has pretty much everything working, see change log at the bottom of the next post. the 11.10 image's UI does not work right and the 9.04 image is well rather old
Once you have downloaded this .zip file you will need to extract it to a folder on your sdcard name this folder "ubuntu".
Install and run Ubuntu!
If you do not have the android SDK install or wish to do all the commands via your tablet please skip to step 7
1) Connect your Desire S to your computer via your USB cable and make sure USB mode is set to “Just Charge”.
2) Your Android device should be recognized as “ADB Device” under Device Manager. If not, install appropriate drivers.
3) Now open a command window and navigate to the directory that you have installed the android SDK for example
4) From here then navigate to the platform-tools directory
5) Now type “adb devices” to double-check your Android device is recognized. It should display something along the lines of
If not then you have not installed the drivers for your tablet or it is not in debugging mode.
6) Next type “adb shell” to enter the Android shell
7) Now type su to enter super user mode, then type cd /sdcard and then cd ubuntu to enter the directory on the SD card that you stored the ubuntu files.
8) Then type sh ubuntu.sh this will run the included script to ready your ubuntu image, do not worry about any error messages that are displayed!
8.5) If running the 10.10 V2 image you should get this message 'please wait while booting the ubuntu img, please wait as this could take a while.' if you do get this then ubuntu is running and you just need to open vnc and connect to get into ubuntu. Please see the bug section on the second post for more information!
9) Now type bootubuntu to enter ubuntu (note in the future to start ubuntu simply type bootubuntu there is no need to run the script again)
You should now see something along the lines of
If you don't then its likely the ROM your using does not support loop devices and you will need to install one of the ROMs from the top of this guide to get it working.
And thats it you now have a working ubuntu command line running within android! however this isnt really much use so lets now get a more useful system running
How to Install TightVNCserver
This is by far the best program to install first off as it will let you access the GUI of Ubuntu as it run on your Desire S. (note this is already included in the 10.10 (V1 and V2) image there is no need to carry out this step)
0) Before you install any program first we need to update by typing
1) Now type “apt-get install tightvncserver” to install the VNC server.
it shall then as you if you wish to install the program etc etc say yes and it will install, simples.
How to Install LXDE (optional but recommended)
only need to carry out this step if you are using the 9.04 image
1) Type “apt-get install lxde” and ubuntu will do the rest
Set up TightVNCServer and fix keyboard issues
(note on the 10.10 image this step has been included already! so no need to carry it out)
Before we launch the TightVNCServer we much make changes the the xstartup file to change to it uses LXDE if we want this and also to fix a big issue with the android keyboard not being mapped correctly.
1) Start off by typing
To open the file we need to make changes in
2) Now type
The last two lines you will only want to type if you have installed LXDE if you want to use XFCE leave these lines off. The line above this (export XKL_XMODMAP_DISABLE=1) is what is needed to fix the keyboard mapping.
3) Now press ctrl+D twice and then press enter to the save the file, we are now ready to start up the VNCServer!
Start TightVNCServer
Now we are ready to start the server and connect our tablet or windows computer to the Ubuntu running within our tablet! (This step is not needed in the new 10.10 V2 image VNCserver now auto starts)
1) Start off by typing
you can change the resolution settings 1024×800 to the resolution of your liking. I find 800x480 does work well but limts your work space so its up to you.
2)TightVNCServer will then ask you for a password to connect to it, fill this in and your server will be then ready to accept any incoming connection from your tablet or computer! (on the 10.10 image it will not ask for this, the password is set to ubuntu)
Connect to VNC on your tablet
1) download the free app Android-VNC-viewer
2) open the app and set your IP address to 127.0.0.1 ( set this to localhost in 10.10 V2) and port number 5901 (5900 in 10.10 V2) and enter the password you set before (or ubuntu on 10.10 images) to then connect.
If all works right you will have a working GUI!!!
Connect to VNC on your computer
1)Start by downloading the desktop version of TightVNC Here
and install it
2) Open the TightVNC Viewer from the start menu it will ask for your tablets IP address, to find this type ifconfig in your ubuntu terminal it will display your IP.
3)Type this into TightVNC and remember to add the port 5901 (5900 in 10.10 V2), it will then ask you for the password ('ubuntu' on 10.10 image) , enter this and you should then have a fully working GUI on your computer!
First and for most this guide has been created from a mixture of a few guides to get it all working on the tablets, I do not take any credit for the methods all I have done is taken the time to work out how to get it working on our tablet. This guide is for windows or can be done all on the tablet. Anyway on with the guide
How To Install Ubuntu on the Desire S
Before we start you will need a ROM and kernel that supports loop devices.
This works best on UrukDroid but may well work on stock roms, due to the lack of RAM ubuntu isn't very fast but everything works unlike running it outside of ubuntu.
It is also recommend that you have the Android SDK install so that you can access adb however all commands can be done on the tablet via the terminal emulator
Also make sure that you have debugging mode enabled Go to Settings->Applications->Development and make sure USB Debugging is checked ON.
You will also need atleast 3.5GB of memory card space
Download and extract ubuntu.zip
Once you have a working ROM with loop support you must now download the special modified ubuntu image. I have hosted the file on my own server however if this is not quick enough feel free to mirror it or message me and I shall host else where as well.
There are now three versions to use as you wish, however the new 10.10 image has pretty much everything working, see change log at the bottom of the next post. the 11.10 image's UI does not work right and the 9.04 image is well rather old
Once you have downloaded this .zip file you will need to extract it to a folder on your sdcard name this folder "ubuntu".
Install and run Ubuntu!
If you do not have the android SDK install or wish to do all the commands via your tablet please skip to step 7
1) Connect your Desire S to your computer via your USB cable and make sure USB mode is set to “Just Charge”.
2) Your Android device should be recognized as “ADB Device” under Device Manager. If not, install appropriate drivers.
3) Now open a command window and navigate to the directory that you have installed the android SDK for example
Code:
cd c:\android-sdk
4) From here then navigate to the platform-tools directory
Code:
cd platform-tools
5) Now type “adb devices” to double-check your Android device is recognized. It should display something along the lines of
Code:
Lists of devices attached
HT09SR204261 device
6) Next type “adb shell” to enter the Android shell
7) Now type su to enter super user mode, then type cd /sdcard and then cd ubuntu to enter the directory on the SD card that you stored the ubuntu files.
Code:
su
cd /sdcard
cd ubuntu
8) Then type sh ubuntu.sh this will run the included script to ready your ubuntu image, do not worry about any error messages that are displayed!
Code:
sh ubuntu.sh
8.5) If running the 10.10 V2 image you should get this message 'please wait while booting the ubuntu img, please wait as this could take a while.' if you do get this then ubuntu is running and you just need to open vnc and connect to get into ubuntu. Please see the bug section on the second post for more information!
9) Now type bootubuntu to enter ubuntu (note in the future to start ubuntu simply type bootubuntu there is no need to run the script again)
Code:
bootubuntu
Code:
root@localhost:/#
And thats it you now have a working ubuntu command line running within android! however this isnt really much use so lets now get a more useful system running
How to Install TightVNCserver
This is by far the best program to install first off as it will let you access the GUI of Ubuntu as it run on your Desire S. (note this is already included in the 10.10 (V1 and V2) image there is no need to carry out this step)
0) Before you install any program first we need to update by typing
Code:
apt-get update
1) Now type “apt-get install tightvncserver” to install the VNC server.
it shall then as you if you wish to install the program etc etc say yes and it will install, simples.
How to Install LXDE (optional but recommended)
only need to carry out this step if you are using the 9.04 image
1) Type “apt-get install lxde” and ubuntu will do the rest
Set up TightVNCServer and fix keyboard issues
(note on the 10.10 image this step has been included already! so no need to carry it out)
Before we launch the TightVNCServer we much make changes the the xstartup file to change to it uses LXDE if we want this and also to fix a big issue with the android keyboard not being mapped correctly.
1) Start off by typing
Code:
cat > /root/.vnc/xstartup
2) Now type
Code:
#!/bin/sh
xrdb $HOME/.Xresources
xsetroot -solid grey
export XKL_XMODMAP_DISABLE=1
icewm &
lxsession
3) Now press ctrl+D twice and then press enter to the save the file, we are now ready to start up the VNCServer!
Start TightVNCServer
Now we are ready to start the server and connect our tablet or windows computer to the Ubuntu running within our tablet! (This step is not needed in the new 10.10 V2 image VNCserver now auto starts)
1) Start off by typing
Code:
export USER=root
vncserver -geometry 1024×800
2)TightVNCServer will then ask you for a password to connect to it, fill this in and your server will be then ready to accept any incoming connection from your tablet or computer! (on the 10.10 image it will not ask for this, the password is set to ubuntu)
Connect to VNC on your tablet
1) download the free app Android-VNC-viewer
2) open the app and set your IP address to 127.0.0.1 ( set this to localhost in 10.10 V2) and port number 5901 (5900 in 10.10 V2) and enter the password you set before (or ubuntu on 10.10 images) to then connect.
If all works right you will have a working GUI!!!
Connect to VNC on your computer
1)Start by downloading the desktop version of TightVNC Here
and install it
2) Open the TightVNC Viewer from the start menu it will ask for your tablets IP address, to find this type ifconfig in your ubuntu terminal it will display your IP.
3)Type this into TightVNC and remember to add the port 5901 (5900 in 10.10 V2), it will then ask you for the password ('ubuntu' on 10.10 image) , enter this and you should then have a fully working GUI on your computer!
Last edited: