[only for devs please] flashing Aria flash to Photon

Search This thread

munjeni

Senior Member
Jun 2, 2011
9,720
22,375
since you can brick your phone
this indicates that you can write some thing through jumpspl
have you dump your bircked flash and do some check?
yes i checked and seen corupted spl, but i think its becous nbh contained radio, but i tried with nbh that contained only spl, splash and conf and not bricked but got "wrong model id" becouse in my phone jumpspl not working, than I patched function that check pb92xxx and sucesfully updated phone but after reboot spl is the same :confused: so it mean flashing spl with jumpspl is not posible! I contacted Cotulla and he say its not possible with sspl (he tried a years ago without success) so I trust him becouse htc hd2 sspl also have disabled spl flashing with sspl...! So question is: what principe use cotulla dft hspl installer... I will be glad to learn:confused: ... I think its an universal bootloader runing from memory becouse after updating hspl for hd2 you see picture on screen: "we hacked it"?

I will play with nand driver in comparation with my segger log that I posted on first page... waiting help from Schlund and Derefas and his opinion! Anyone tried to send manualy an command to nand_base and get reaply, for example "get nand id" ???

EDIT:
Found an very interesting example -> http://gitorious.org/androidfan-fla...ea3415c4fec017/drivers/char/memdump/memdump.c that have reaply to my question from first post... will try now
 
Last edited:

schlund

Senior Member
Nov 25, 2010
457
1,064
unfortunately i have absolutely no knowledge in android nand driver :/
some suggestions from other developers would really be appreciated!
 
  • Like
Reactions: tm.bax

munjeni

Senior Member
Jun 2, 2011
9,720
22,375
Ok. Memdump module working :) so I will start from there from now (will try to brick my device with memdump.ko and will try to port part of the segger log to memdump module :) Here is some logs I got now:

Code:
<4>[   45.436248] memdump: module license 'unspecified' taints kernel.

<4>[   45.438476] Reseting 0xA8240800 (D3000000) MPU

<4>[   45.438690] Reseting 0xA8250800 (D3004000) MPU

<4>[   45.438873] Reseting 0xA0B00000 (D303A000) MAND MPU

<4>[   45.439178] Nand Config from 0xA0A00000 (D303E000)

<4>[   45.439361] NAND_FLASH_CMD = 33, NAND_ADDR_0 = E5AD0000, NAND_ADDR_1 = 2, NAND_FLASH_CHIP_SELECT = 4

<4>[   45.439666] NAND_FLASH_STATUS = C00020, NANDC_BUFFER_STATUS = FFFF0000

<4>[   45.439941]  NAND_DEVn_CFG0 = E85408C0,  NAND_DEVn_CFG1 = A7476

<4>[   45.440124]  NAND_DEV1_CFG0 = AAD4001A,  NAND_DEV1_CFG1 = 2101BD

<4>[   45.440429] NAND_FLASH_READ_ID = 5500BCEC, NAND_FLASH_READ_STATUS =C0
Not surre if nand mpu is disabled but will try something
 

ncla2000

Member
Apr 7, 2011
24
9
I find a easy and cheap way to flash through jtag。
hardware:http://item.taobao.com/item.htm?id=4123181065
software:http://www.hjtag.com/en/index.asp
Shall you spare your jtag pins and your dump ?

this support:

i.MX27+K9F1208 i.MX27+K9F1G08 i.MX27+K9F2G08 i.MX27+MT29F2G08 LPC2478+K9F1G08
LPC2478+K9F5608 LPC32X0+K9F1
G08-MLC LPC32X0+K9F1G08-SLC
LPC32X0+K9F2G08+MLC LPC32X0+K9F2G08+SLC PXA300+H8BCS0SI0MBR
PXA300+K9F1G08 PXA300+K9F2G08 PXA300+K9F4G08 PXA300+K9K8G08
PXA300+MT29F1G16 PXA300+NAND01G
R3B2B PXA300+NAND01GR4B2B
PXA300+NAND01GW3B2B PXA300+NAND
01GW4B2B PXA300+NAND02GR3B2C
PXA300+NAND02GR4B2C PXA300+NAND
02GW3B2C PXA300+NAND02GW4B2C
PXA300+TYA000B000ALKF40 PXA30X+H8BCS0SI0MBR PXA30X+K9F1G08
PXA30X+K9F2G08 PXA30X+K9F4G08 PXA30X+K9K8G08 PXA30X+MT29F1G16
PXA30X+NAND01GR3B2B PXA30X+NAND01GR4B2B PXA30X+NAND01GW3B2B
PXA30X+NAND01GW4B2B PXA30X+NAND02GR3B2C PXA30X+NAND02GR4B2C
PXA30X+NAND02GW3B2C PXA30X+NAND02GW4B2C PXA30X+TYA000B000ALKF40
PXA31X+H8BCS0SI0MBR PXA31X+K9F1G08
PXA31X+K9F2G08 PXA31X+K9F4G08
PXA31X+K9K8G08 PXA31X+MT29F1G16 PXA31X+NAND01GR3B2B
PXA31X+NAND01GR4B2B PXA31X+NAND01GW3B2B PXA31X+NAND01GW4B2B
PXA31X+NAND02GR3B2C PXA31X+NAND02GR4B2C PXA31X+NAND02GW3B2C
PXA31X+NAND02GW4B2C PXA31X+TYA000B000ALKF40 PXA32X+H8BCS0SI0MBR
PXA32X+K9F1G08 PXA32X+K9F2G08 P
XA32X+K9F4G08 PXA32X+K9K8G08
PXA32X+MT29F1G16 PXA32X+NAND01GR3B2B PXA32X+NAND01GR4B2B
PXA32X+NAND01GW3B2B PXA32X+NAND01GW4B2B PXA32X+NAND02GR3B2C
PXA32X+NAND02GR4B2C PXA32X+NAND02GW3B2C PXA32X+NAND02GW4B2C
PXA32X+TYA000B000ALKF40 S3C2410+K9F1208 S3C2410+K9F1G08 S3C2410+K9F2G08
S3C2410+K9F4G08 S3C2410+K9F5608 S3C2410+K9G8G08 S3C2410+K9K8G08
S3C2416+K9F1208 S3C2416+K9F1G08 S3C2416+K9F2G08 S3C2416+K9F4G08
S3C2416+K9F5608 S3C2416+K9G8G08 S3C2416+K9K8G08 S3C2440+H8ACS0EH0ACR
S3C2440+HY27US08121A S3C2440+K9F1208 S3C2440+K9F1G08 S3C2440+K9F2G08
S3C2440+K9F4G08 S3C2440+K9F5608 S3C2440+K9G8G08 S3C2440+K9K8G08
S3C2443+K9F1208 S3C2443+K9F1G08 S3C2443+K9F2G08 S3C2443+K9F4G08
S3C2443+K9F5608 S3C2443+K9G8G08 S3C2443+K9K8G08 S3C2450+K9F1208
S3C2450+K9F1G08 S3C2450+K9F2G08 S3C2450+K9F4G08 S3C2450+K9F5608
S3C2450+K9G8G08 S3C2450+K9K8G08 S3C6410+K9F1208 S3C6410+K9F1G08
S3C6410+K9F2G08 S3C6410+K9F4G08 S3C6410+K9F5608 S3C6410+K9G8G08
S3C6410+K9K8G08
 
Last edited:

munjeni

Senior Member
Jun 2, 2011
9,720
22,375
Cotulla ingnoring my PM message, it mean hi is not interested and he no want your donation :D and we suck in spl and I tried everything without success and can not got help and not got audio fix from Derefas for sense version and Derefas can not want to post his fix (first disapoint for my hspl effort) and I waiting and waiting without success... he ignore me... and...and...and THE END... Im disapointed totaly :) and now im on Aria flash because there no working rom for my needs... maybe if someone fix audio in sense version and give me fix maybe I will play again with photon flash... SORRY I can not want to work with 10 things at the same time, sorry!

To explain. Disapoint? Why? Example: last week-two weeks, I tried to fix video queues, but: audio was not working! So I tried to test my vedeo kernel changes but when android produce tone device reboot! So. I am disapointed becouse Derefas sayed that audio fix he have. I asked for fix but he ignored my post! So I'm suck with my untested-possible video fix! So what you think about my thinking after that? What would you do? Did you have the will to work with audio thing after waiting 2 weeks for audio fix? I'm sorry, I'm not want to doing that, I expect teamwork, not to waste time with something for which there is a solution, why do not somebody wants team work? ... no sense:confused: ... and we are again in well known old storry about "unorganized, bad, slow, tedious...etc" team work who can not make progress!!! :cool: We are suckers and will be suckers in this development, for sure!
 
Last edited:

kowal248

Member
Feb 10, 2011
38
16
Google Pixel 8 Pro
Cotulla ingnoring my PM message, it mean hi is not interested and he no want your donation :D and we suck in spl and I tried everything without success and can not got help and not got audio fix from Derefas for sense version and Derefas can not want to post his fix (first disapoint for my hspl effort) and I waiting and waiting without success... he ignore me... and...and...and THE END... Im disapointed totaly :) and now im on Aria flash because there no working rom for my needs... maybe if someone fix audio in sense version and give me fix maybe I will play again with photon flash... SORRY I can not want to work with 10 things at the same time, sorry!

To explain. Disapoint? Why? Example: last week-two weeks, I tried to fix video queues, but: audio was not working! So I tried to test my vedeo kernel changes but when android produce tone device reboot! So. I am disapointed becouse Derefas sayed that audio fix he have. I asked for fix but he ignored my post! So I'm suck with my untested-possible video fix! So what you think about my thinking after that? What would you do? Did you have the will to work with audio thing after waiting 2 weeks for audio fix? I'm sorry, I'm not want to doing that, I expect teamwork, not to waste time with something for which there is a solution, why do not somebody wants team work? ... no sense:confused: ... and we are again in well known old storry about "unorganized, bad, slow, tedious...etc" team work who can not make progress!!! :cool: We are suckers and will be suckers in this development, for sure!


I watch forum for a long time and same was with "Crasharding" or how was his
nick.... nvm. I saw after every big progres when something was almost done some devs made drama and quited... pathetic ... it looks like a argueing for a " who made most and why he is the best ". Seems like still adult ppl are like kids :)))

btw munjeni keep fight to make a good work if other dont wanna be known for a good work they dont have to. U can take all goals :) Same this with donations - its a choise of free ppl on them own will.
gl
 
Last edited:

NoxinHH

Senior Member
Jul 16, 2008
83
34
Hamburg
Munjeni, thanks for the update. It is really a pity that you guys are not able to go on.

What's your (and Schlunds) opinion, should I keep my three HD Mini devices or should I try to sell them or even better: Simply throw them away?

My kids would really like to use the phone but I'm not gonna let them start with Windows Mobile. So we will buy some new Android phones for them.
Any suggestions are very appreciated. Something small and tiny, like the photon...

CU,
Harry
 

munjeni

Senior Member
Jun 2, 2011
9,720
22,375
Why you dont buy htc aria, I have one and im very happy with it... everything working like a charm, allso if you read this -> http://xdaforums.com/showthread.php?t=1528650 you will be very happy when you see news about "comming" full working miui rom port for aria :eek: ... I will not sell my aria for a long time becouse its very good and compact-small phone... I think photon devs will fix photon things in near future, or maybe someone will find way for how to install hspl, but if you no want to wait... best buy is aria
 
Last edited:

ncla2000

Member
Apr 7, 2011
24
9
Why you dont buy htc aria, I have one and im very happy with it... everything working like a charm, allso if you read this -> http://xdaforums.com/showthread.php?t=1528650 you will be very happy when you see news about "comming" full working miui rom port for aria :eek: ... I will not sell my aria for a long time becouse its very good and compact-small phone... I think photon devs will fix photon things in near future, or maybe someone will find way for how to install hspl, but if you no want to wait... best buy is aria

Good bye,munjeni with your sucking aria.
you are a amazing guy to hold your jtag pins to your tomb. you always ask but not to share.
i wont buy any one android phone.
for game it cant vs psp 3ds even a xbox360 unpleasent to work good
for power it cant stay for one day,i wont buy stupid android to charge everyday
for software i can write simple programe with VB on photon,aria will never be the rasion to learn sucking java for me as a simple engineer.
i will buy a Wp7.5 or Wii U but never to buy a sucking android copying ios.
good bye munjeni,never be here again.
 
  • Like
Reactions: NoxinHH

Top Liked Posts

  • There are no posts matching your filters.
  • 18
    Guys I'm very very close to get hspl installer... http://img687.imageshack.us/img687/8656/img0999zy.jpg
    11
    Hahaha, finaly have sspl.nb 512kb full dump (was scattered throughout the memory area, I had to assemble it from memory dump in comparation with original spl 1.07) and good news is it working with jumpspl compiled for photon :), let's go patching :D

    Who want to try, just place sspl.nb and jumpspl.exe to sd card, run jumpspl from phone, set offset 00000000, click ok, select sspl.nb and thats it :)
    10
    I have good news for you... HSPL is ready!!! Pb92xxx string fixed, supercid fixed, flash unsigned code tested and fixed :p, flashing rom with including HSPL tested/working, flashing radio/spl tested/working, flashing without gold card working....... everything working and hspl is READY!!!

    Only we need to find way how to install hspl! Here is some logs I got from hspl:
    Code:
    Cmd>task 32
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    [color=red]Level = 0[/color]
    
    Cmd>info 2
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    Card inserted
    SD clk rate 19MHz
    Cmd5 CMD_TIMEOUT
    SD clk rate 144KHZ
    SD 2.0 HC card
    HTC_PLAT_SOLUTION == 7227, GPLL is 245.76MHz
    SD Clk rate 24 MHz
    SD Init OK
    [color=red]HTCSSuperCID[/color]HTCE
    Cmd>info 3
    HTCSPB9210000SuperCID`¸~&%°+X&,xk?+ă4ťÎß0Ő
                                              äÂÜPBPPhoton1.31.HSPLCŚ=ĹHTCE
    Cmd>PuTTY

    New jumpspl that I not published now was bricked my device, it corumped my spl and radio, so is not ready now!

    EDIT:
    Acepting aria flash (nbh with radio, radioconf, splashes, hboot) but radio have own rsa modulus that I will import from hboot :D becouse got "rsa fail" ... see picture:
    http://img94.imageshack.us/img94/2839/img0993lt.jpg
    http://img703.imageshack.us/img703/2364/img0992mp.jpg
    6
    I tested with jumpspl and have usb recognized!

    EDIT:
    you need active sync connection active before executing jumpspl!
    5
    Huh, maybe becouse my phone is not photon? Have new version jumpspl, please try and let me know