Now... the partitions thing..
Could anyone simplify steps for those 3 partitions I've to make?
My sdcard is 8gb class 2 (unfortunatelly)..
tnx in advance
OK Firstly try this..................>pm11img Download this and store on the root of your sd.
By that i mean don't change the file, don't open it or store it any file, just on the root of your sd.
This is accessible from HBOOT.
To access HBOOT, pull your battery out. reinsert battery and holding volume key down press power button.
It will now enter a new menu.
it will do a pm11img check, if it works it will update your hboot version and ask you to reboot. do it.
if this works you will have a pink *locked* appear right at the top
if this hasn't then we need to look into it more.
If this does work then we need you to install recovery.
You require 3 files >ADB Files
add this into a folder in your c:/ called Android. so it will look like c:/Android.
Unzip the file and 3 files appear.
This will help unlocking bootloader aswell.
This program does the lot. backups restores wipes etc....everything...
To install this you need the 188.8.131.52 recovery file. >Recovery file at bottom
This post shows how to install recovery using adb cmds in cm prompt. there is a spelling mistake.
So here are the new lines.....you can copy the bold writing to cmd window to make it easier.
*Note, your phone needs to be plugged into your computer using charge option only*
line 1 is c:/Android/adb reboot bootloader
line 2 is c:/Android/fastboot flash recovery recovery.img
Once this is done, you may choose the recovery selection in HBOOT to load recovery up.
For EXT3 Creation you require Minitool partition wizard > MiniTool 7.1
use this to resize your sd.
You must make a copy of your sd card on your computer....
if this works fine then nothing will happen to your sd....if you do this wrong it will wipe your sd!
Set a space of 1gb max for ext usage and make primary.
Don't use cwm to make partitions like the other phone...this works and will stay this way till something new appears.
Once this is created it may come back with bad disk.....don't panic it does that!
If all this has been done right, then your set.
If you get stuck im around so i will respond!
the above steps will allow you to have the basics setup and ready for custom roms!
I tried your PH11IMG.ZIP(http://www.mediafire.com/download.php?uma19r3pysr93dr).
But it was only detected and it didn't asked to update ?
Is there a problem with your image file ?
On a completely non related topic, will the cwm I flash here allow me to flash custom roms as well? to be precise, the one here,
And @bigbearevo don't you think 472MB is just too darn large for a custom ROM. I mean cm7 barely crosses 100mb ever
|Thread Tools||Search this Thread|