Sweet, I just found it actually. Hopefully I've set things up correctly. Thanks for the help.
AOKP M4
AOKP M4
Do you guys think this script will make any difference for the Galaxy S2?
Sent from my SPH-D710 using xda premium
Try downloading the script again. Sounds like its incomplete.when i try to use V6 super charger, i get syntax error near unexpected token........
am using sony ericsson xperia mini pro
Try downloading the script again. Sounds like its incomplete.
You might not have the latest busy box version too. There's one in the op you should flash.
The easiest way to install the wraithdu busybox is to download it. Unzip the file and run the .sh file with script manager. Make sure you run as root.thanks for yur reply.... i use tha busybox 1.94 version, i flashed it using CWM or am i to use tha 3? maybe i ll try redownload. i download tha first attached file, extract & copy v6supercharger to SDcard root.
The easiest way to install the wraithdu busybox is to download it. Unzip the file and run the .sh file with script manager. Make sure you run as root.
I can give you the solution to one of the things you ask forFirst of all thanks for this really awesome script
As this script changes the android memory management as it really should be, I would appreciate it to be standard!
Unfortunately the overall handling with the script is not really getting better.
This is not a fault of you. You try to put in as much information as possible while the script is running, so ppl ask less stupid questions
I think theres only one solution to make this thing really interesting for everybody is to put in into a GUI. The script is really kinda extensive now and a good overview is nearly impossible just within the script editor
If this is not possible, or if you lack time doing this it would be awesome to see an advanced user mode.
Something like:
- Switch of EVERY not really needed information.
- Running script at maximum possible speed, no pauses, just when waiting for input of course
- More options to preconfigure script behavior like "always put into hitlist"
What do you think?
Instead of dog-like, it's god-like?What have you done to my phone?! It came in as a Huawei u8150 and left as a GOD!
http://androidspin.com/2011/11/02/v6-supercharger-the-android-memory-fixer/Do you guys think this script will make any difference for the Galaxy S2?
hey Zeppelinrox, quick question
is there any way to change kak from using deadline as default to use noop as default? I wanna experiment between the two.
either that or which of the older versions use noop that I should download? thanks in advance bro
(was also wondering if there was a way to install ONLY I/O Tweaks but not the rest of the kak vm tweaks and such, just some more experimenting I wanna mess with)
thanks again
and thanks for the great work and constant updates , there is literally something for almost every device here
can't wait to get my gnex tomorrow and check this out on there
#!/system/bin/sh
#
# The Kick Ass Kernelizer assembled and refined by zeppelinrox.
# See included links for resources.
#
# You can choose your scheduler by editing the "sio" line near the bottom.
# Look for the comment down there!
#
# echo ""; echo " See /data/Log_KickAssKernel.log for the output!"; echo "";
# For debugging, delete the # at the beginning of the following 2 lines, and check /data/Log_KickAssKernel.log file to see what may have fubarred.
# set -x;
# exec > /data/Log_KickAssKernel.log 2>&1;
#
line=================================================;
echo "";
echo $line;
echo " The -=Kick Ass Kernelizer=- by -=zeppelinrox=-";
echo $line;
echo "";
###########################
# Tweak I/O Scheduler++ #
###########################
for i in /sys/block/*/queue/scheduler; do # Omitting may cause problems
if [ -f "$i" ]; then busybox sync; # Omitting may cause problems
echo "cfq" > $i; # Omitting may cause problems
fi; # Omitting may cause problems
done; # Omitting may cause problems
for i in /sys/block/*/queue; do
if [ ! "`echo $i | grep loop`" ] && [ ! "`echo $i | grep ram`" ]; then
if [ -f "$i/rotational" ] && [ "`cat $i/rotational`" -ne 0 ]; then echo "0" > $i/rotational; fi;
if [ -f "$i/iosched/low_latency" ]; then echo "1" > $i/iosched/low_latency; fi;
if [ -f "$i/iosched/back_seek_penalty" ]; then echo "1" > $i/iosched/back_seek_penalty; fi;
if [ -f "$i/iosched/back_seek_max" ]; then echo "1000000000" > $i/iosched/back_seek_max; fi;
if [ -f "$i/iosched/slice_idle" ]; then echo "0" > $i/iosched/slice_idle; fi;
if [ -f "$i/iosched/fifo_batch" ]; then echo "1" > $i/iosched/fifo_batch; fi;
if [ -f "$i/iosched/quantum" ]; then echo "16" > $i/iosched/quantum; fi;
if [ -f "$i/nr_requests" ]; then echo "512" > $i/nr_requests; fi;
if [ -f "$i/iostats" ] && [ "`cat $i/iostats`" -ne 0 ]; then echo "0" > $i/iostats; fi;
fi;
done;
sio=`cat /sys/block/mmcblk0/queue/scheduler | grep sio`;
deadline=`cat /sys/block/mmcblk0/queue/scheduler | grep deadline`;
noop=`cat /sys/block/mmcblk0/queue/scheduler | grep noop`;
for i in /sys/block/*/queue/scheduler; do
if [ -f "$i" ]; then busybox sync;
if [ "$sio" ]; then echo "sio" > $i; # Put your desired scheduler here - just replace the 2 instances of "sio".
elif [ "$deadline" ]; then echo "deadline" > $i;
elif [ "$noop" ]; then echo "noop" > $i;
fi;
fi;
done;
echo " $( date +"%m-%d-%Y %H:%M:%S" ): Kernel's Kickin' Ass via $0!" >> /data/Ran_KickAssKernel.log;
echo "";
echo " $0 Executed...";
echo "";
echo " ==============================";
echo " ) KickAssKernel Completed! (";
echo " ==============================";
echo "";
Well... a market/play app is inevitable...If this is not possible, or if you lack time doing this it would be awesome to see an advanced user mode.
Something like:
- Switch of EVERY not really needed information.
- Running script at maximum possible speed, no pauses, just when waiting for input of course
- More options to preconfigure script behavior like "always put into hitlist"
What do you think?
Hence the download instructions - which you didn't read.Hey buddy.
Attachments show 'Failed to open pdf' hence I'm unable to download it.
Hey wait for me lolI can give you the solution to one of the things you ask for
running script at maximum possible speed, no pauses
- go to driver options, then when it asks you which choice for speed (1,2 or3) ENTER 0 instead
it was an option from a, long time ago that is still there just not advertised, and BOOM no more waiting, you can always scroll back up to see what happened, buy you have zero wait time while making your choices when you enter 0 for speed.
enjoy
I dunno, but it's the top downloaded services.jar for ICSSo I finally got a gnex and flashed my first custom rom. How is everybody's performance with the supercharger on it? I don't know if I may need this since the ram on the gnex is already superb. Just asking.
So it's gravity "Defy-ing"?
Main Download Page is HERE (V6 SuperCharger and all the latest RC/Beta/Tests for Kick Ass Kernelizer, 3G TurboCharger, and Die-Hard Battery Calibrator)
Latest V6 SuperChargers are Black Dog-63457-Fix and For Your Lag
Latest KAK and 3G TC are HERE
Post #2 Info! - This is for the application of the following 3 Mods to services.jar!
Mod 1. ICS and Jelly Bean - require the Jelly ISCream Mod done in conjunction with the V6 SuperCharger Script to SuperCharger your launcher!
Mod 2. Froyo and up - can have the New Maximum MultiTasking Mods (Maximum Overdrive and the Time Killer Killer)
Mod 3. Sense 4 and up - remove the Sense 4 limit of only 8 visible apps with the Non-Sense App Limit!
These 3 mods are applied with my:
-=Ultimatic Jar Patcher Tools=- (fully automated exe/bat/sh tools) OR...
-=Ultimate Jar Power Tools=- patcher script (formerly called Jelly ISCream Smali Patcher) to automate Step 5 in Post #2 - the smali edits
Note: The webapp needs updating (aka the "Automatic Transmission" in V6 SuperCharger) and won't work on JB!
System -16 (stock)
Persistent Process -12 (stock)
ForeGround app 0 (stock)
Home Launcher 1 (Die-Hard Launcher) (stock=6)
Perceptible app 2 (stock)
Visible app 3 (stock=1)
Heavyweight app 4 (stock=3)
Previous app 5 (stock=7)
Service 6 (stock=5)
Backup app 7 (stock=4)
Service_b 8 (stock)
Hidden app min 9 (stock)
Hidden app max 15 (stock)
Now copy /sdcard/services.odex to /system/framework and overwrite the original (backed up, yes?) services.odexCreate a new services.odex file from the new services.jar file:
In terminal, type: cd /sdcard, enter, dexopt-wrapper services.jar services.odex $BOOTCLASSPATH, enter.
Here's the "special sauce": copy over the "signature" from the current .odex file into the new .odex file. do NOT continue until this command succeeds!
Hint: the file size of the new services.odex file should not change!
In terminal, type: busybox dd if=/system/framework/services.odex of=/sdcard/services.odex bs=1 count=20 skip=52 seek=52 conv=notrunc
fixed disappearing apps in zipalign/fixalign scripts (and no more problematic/skipped apps)
fixed frandom
fixed crosslink error in 99SC.sh
fixed bug when configuring boot options from within zepalign, fixfc and fixalign scripts
fixed bug in sdcard calculation
added frandom check
added 6i9 ass easter egg
added vm.vfs_cache_pressure=10
removed pm.sleep_mode
moved config options in boot scripts to the end (after script runs)
/init.d/92vac opens bootlog if no sqlite3 binary
/init.d/93zepalign and /init.d/95fixalign opens bootlog if no zipalign binary
ask before bp launcher
v6 does not run if running from int.d (duh)
tweaked FOM output/stats/user info
tweaked logic when resupercharging re. getting previous options/regenerating
tweaked launcher function (updated whenever you return to menu)
tweaked ram function
enhanced user infos and help file...
...example: Notes about init.d scripts making BootLogs
tweaked lots of code to be more efficient...
...example: No more `cat /file/name | awk or grep` (just awk or grep a file directly... duh...)
Hell... tons of code tweaking anyway lol
Fixed Fixalign and Fix Emissions Bugs
Couple of other smaller bugs