i think this tablet is japanes version of G-table
when turn on the tablet ,i dont can see any things ,only white screen (only backlight lcd) . i pressed vol+ and power but nothings
is it possible help me?
in addition when i connect tablet to pc , i can see Tegra label in Device manager
even i test backlight sensor ,it work perfect then i think my issue is software.
Also led wifi is on
C:\SOME\PATH> .\nvflash --bl bootloader.bin --getpartitiontable part.txt
C:\SOME\PATH> adb shell
C:\SOME\PATH> adb logcat -v time
if when you connect and disconnect the USB cable, Windows detects the device connection/disconnection, then the HW and ROM/recover are most probably OK
"nvflash.exe" --bct gtablet.bct ... --create --go
2. I think it is a HW problem (LCD panel, cable, connector). Use a magnifying glass on the cable and the connectors, and a fine-probed continuity tester on the cable, and see if they're OK.
4. The nvflash command probably didn't work because the device was not in APX mode. Put the LuvPad into APX mode first (Power off, then press Vol [-] and Power), then run my nvflash command. To run the recovery mode test, put tablet into recovery mode first (Power off, then press Vol [+] and Power)
Can we start from the beginning? How exactly did your tablet get in this situation (dropped, flashed someothing, just turned on & it started doing it, etc)?
some hires photos of the internals (boards, connections, lcd)...anything thing
You say that you don't see anything different when you power on with Vol (+) or Vol (-)
|Thread Tools||Search this Thread|