[Q] using RSD for moto defy

Search This thread

freza080

New member
Apr 7, 2012
4
0
Mobile:Moto Defy.
System Version:Moto_version.34.3601.7.MB525.retail.en.SEA15
Firmware version:2.2.2
Baseband version:EPU93_U_00.59.02
Problem:I had unrooted my moto defy and I want to bring it back to warranty. I want step by step guide for
1)getting the RSD(link) and using it.
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it.
3)Drivers required.
4)Cautions to be taken.
5)Do I need to root to carryout this process?
I need really a full help :( as I am new to this . Please help me. Thanks In advance.
 

rgadge

Senior Member
May 25, 2011
156
46
New Delhi
profiles.google.com
Mobile:Moto Defy.
System Version:Moto_version.34.3601.7.MB525.retail.en.SEA15
Firmware version:2.2.2
Baseband version:EPU93_U_00.59.02
Problem:I had unrooted my moto defy and I want to bring it back to warranty. I want step by step guide for
1)getting the RSD(link) and using it.
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it.
3)Drivers required.
4)Cautions to be taken.
5)Do I need to root to carryout this process?
I need really a full help :( as I am new to this . Please help me. Thanks In advance.



2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it : Only use 2.2.2 SBF. If you flash newer sbf you might not be able to downgrade thereafter.

5)Do I need to root to carryout this process? : This flashing process will bring the phone to factory defaults (Stock) so it will be automatically unrooted. However, you may root again later.


This article has answers to all of your queries:
http://xdaforums.com/showthread.php?t=1216982
 
Last edited:
  • Like
Reactions: freza080

freza080

New member
Apr 7, 2012
4
0
2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it : Only use 2.2.2 SBF. If you flash newer sbf you might not be able to downgrade thereafter.

5)Do I need to root to carryout this process? : This flashing process will bring the phone to factory defaults (Stock) so it will be automatically unrooted. However, you may root again later.


This article has answers to all of your queries:
http://xdaforums.com/showthread.php?t=1216982

thanks :) . read the article in the mentioned link and got many things cleared. But i couldn't get exact version of my moto defy SFB. please please send me a direct link of that file. A million thanks to your reply :D
 

rgadge

Senior Member
May 25, 2011
156
46
New Delhi
profiles.google.com
thanks :) . read the article in the mentioned link and got many things cleared. But i couldn't get exact version of my moto defy SFB. please please send me a direct link of that file. A million thanks to your reply :D

Do you have the RSD Lite and the USB drivers installed. If not then refer to this article:
http://xdaforums.com/showthread.php?t=1216982

For the SBF file use the following direct link to download the SBF:
http://sbf.droid-developers.org/umt...NFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz

[Note: The above SBF is not Chinese which causes the flash burn; it is Taiwanese and safe to flash.]

Download and extract the above file.
1. Launch RSD lite and select the above extracted SBF file;
2. Turn off the phone and remove and replace the battery;
3. Press Volume UP and Power button until you see Bootloader menu;
4. Once its shows the Bootloader menu connect the USB cable to the RSD lite and then start the flashing process;
5. Phone will update the software and once it shows Success you are good to go.

Hope it helps!

Good Luck!! :)
 
Last edited:
  • Like
Reactions: freza080

freza080

New member
Apr 7, 2012
4
0
Do you have the RSD Lite and the USB drivers installed. If not then refer to this article:
http://xdaforums.com/showthread.php?t=1216982

For the SBF file use the following direct link to download the SBF:
http://sbf.droid-developers.org/umt...NFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz

[Note: The above SBF is not Chinese which causes the flash burn; it is Taiwanese and safe to flash.]

Download and extract the above file.
1. Launch RSD lite and select the above extracted SBF file;
2. Turn off the phone and remove and replace the battery;
3. Press Volume UP and Power button until you see Bootloader menu;
4. Once its shows the Bootloader menu connect the USB cable to the RSD lite and then start the flashing process;
5. Phone will update the software and once it shows Success you are good to go.

Hope it helps!

Good Luck!! :)

first thanks for soo quick and nice reply!!!!!! .......... :D ......... I GOT ALL thing i had downloaded Sfb file from your link! :D ....... still as this is my first time n i am very worried so please tell me will this return my phone to warranty ? which version of RSD lite? :( thanks in advance. :) .......
 

rgadge

Senior Member
May 25, 2011
156
46
New Delhi
profiles.google.com
first thanks for soo quick and nice reply!!!!!! .......... :D ......... I GOT ALL thing i had downloaded Sfb file from your link! :D ....... still as this is my first time n i am very worried so please tell me will this return my phone to warranty ? which version of RSD lite? :( thanks in advance. :) .......

RSD Lite: Use the one from the following link:
http://xdaforums.com/showthread.php?t=1348587


Do not worry about the warranty this will make the phone Stock 2.2.2. :)

Good Luck!!
 
  • Like
Reactions: freza080

Top Liked Posts

  • There are no posts matching your filters.
  • 1
    Mobile:Moto Defy.
    System Version:Moto_version.34.3601.7.MB525.retail.en.SEA15
    Firmware version:2.2.2
    Baseband version:EPU93_U_00.59.02
    Problem:I had unrooted my moto defy and I want to bring it back to warranty. I want step by step guide for
    1)getting the RSD(link) and using it.
    2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it.
    3)Drivers required.
    4)Cautions to be taken.
    5)Do I need to root to carryout this process?
    I need really a full help :( as I am new to this . Please help me. Thanks In advance.



    2)getting SFB file for my defy version(INDIA-Mumbai) and how to use it : Only use 2.2.2 SBF. If you flash newer sbf you might not be able to downgrade thereafter.

    5)Do I need to root to carryout this process? : This flashing process will bring the phone to factory defaults (Stock) so it will be automatically unrooted. However, you may root again later.


    This article has answers to all of your queries:
    http://xdaforums.com/showthread.php?t=1216982
    1
    thanks :) . read the article in the mentioned link and got many things cleared. But i couldn't get exact version of my moto defy SFB. please please send me a direct link of that file. A million thanks to your reply :D

    Do you have the RSD Lite and the USB drivers installed. If not then refer to this article:
    http://xdaforums.com/showthread.php?t=1216982

    For the SBF file use the following direct link to download the SBF:
    http://sbf.droid-developers.org/umt...NFRYORTINT15_P001_A013_HWp3_Service1FF.sbf.gz

    [Note: The above SBF is not Chinese which causes the flash burn; it is Taiwanese and safe to flash.]

    Download and extract the above file.
    1. Launch RSD lite and select the above extracted SBF file;
    2. Turn off the phone and remove and replace the battery;
    3. Press Volume UP and Power button until you see Bootloader menu;
    4. Once its shows the Bootloader menu connect the USB cable to the RSD lite and then start the flashing process;
    5. Phone will update the software and once it shows Success you are good to go.

    Hope it helps!

    Good Luck!! :)
    1
    first thanks for soo quick and nice reply!!!!!! .......... :D ......... I GOT ALL thing i had downloaded Sfb file from your link! :D ....... still as this is my first time n i am very worried so please tell me will this return my phone to warranty ? which version of RSD lite? :( thanks in advance. :) .......

    RSD Lite: Use the one from the following link:
    http://xdaforums.com/showthread.php?t=1348587


    Do not worry about the warranty this will make the phone Stock 2.2.2. :)

    Good Luck!!