No, to wipe data. This could solve it. And if you get "contact dealer" error, boot with bp tools.
Gesendet von meinem XT910 mit Tapatalk 2
I hate to mark something by using my RazR
That f...g Browser won't do what I want and my CNC got no Internet :banghead:
Gesendet von meinem XT910 mit Tapatalk 2
I'll post it here as soon as possible
But hey, better to have an unrootet Device than an bricked Device
Gesendet von meinem XT910 mit Tapatalk 2
Thank you. The battery will be a problem but I can boot into AP mode then turn it off. I am hoping that this will charge it. I'll leave it a while. If this don't work I'll get a factory cable.(get one made)
Ok Guys,
after playing a little bit with my Razr running the T-Mobile ICS Leak i got it finaly bricked
< CRACKFLASHER
Don't ask how i did this, that doesn't matter
I tryed to restore my Backup that i did before in CWM, but get an Error restoring the System.
So my only way back to an working Phone was RSD an here I'm.
I'll post you my .XML-File for the T-Mobile 2.3.6, so maybe you can do it the same way.
<flashing>
<header>
<phone_model model="UMTS_SPYDER"/>
<software_version version="umts_spyder-user 2.3.6 6.5.1-167_SPU-15-M2-1-DE 1328517836 release-keysSPYDERBP_U_03.1C.91P"/>
<interfaces>
<interface name="AP"/>
</interfaces>
</header>
<steps interface="AP">
<step operation="flash" partition="mbm" filename="allow-mbmloader-flashing-mbm.bin" MD5="3BD5A466807C6BD4170BA22518C03DA7"/>
<step operation="reboot-bootloader"/>
<step operation="flash" partition="mbmloader" filename="mbmloader.bin" MD5="9D88A534DC24ABB24757BD8C357E82A0"/>
<step operation="flash" partition="mbm" filename="mbm.bin" MD5="E718C75A0163E255C96E0B2A3E32F70C"/>
<step operation="reboot-bootloader"/>
<step operation="erase" partition="cache"/>
<step operation="erase" partition="userdata"/> Delete these 2 Lines, if you don't want to loose your data!
<step operation="erase" partition="emstorage"/> I prefere an clean install, that's your choice
<step operation="flash" partition="logo.bin" filename="logo.bin" MD5="06c07c2970460a4e656a3206859a3617"/>
<step operation="flash" partition="ebr" filename="ebr_signed" MD5="3d655a67765d001a89d73a3dab34d413"/>
<step operation="flash" partition="mbr" filename="mbr_signed" MD5="d45a2d3d3d440fed6840aa1f0188e67e"/>
<step operation="flash" partition="system" filename="system_signed" MD5="8d087c352a7d7c97039d37714de03489"/>
<step operation="flash" partition="emstorage" filename="emstorage.img" MD5="F248FF87BFAB03E3278891AD151ADDE7"/>
<step operation="flash" partition="webtop" filename="webtop_signed" MD5="7ad932b66a7ec9935a93cc3a4b1645b6"/>
<step operation="flash" partition="radio" filename="radio.img" MD5="9a833b62d4f3574dc8b41141f4c5b731"/>
</steps>
</flashing>
After flashing with RSD the Phone boots into Recovery, as you know.
Flash the Update.zip from there and reboot your Device.
Ofcourse there's no Root anymore!
Edit: I've used an Factory Cable for flashing...