I know something about it. Flashed LowKernel via fastboot and my phone was stuck on HTC logo :\ then reflashed boot.img and everything was ok. but i think its not 100% safe flashing with s-on. or am i wrong?
sorry for bad english.
[TOOL] HTC One S All-In-One Toolkit v4.0 [7-10-2013] [PERM ROOT][Noob-Proof]
- Thread starter hasoon2000
- Start date
-
- Tags
- development
- Status
I know something about it. Flashed LowKernel via fastboot and my phone was stuck on HTC logo :\ then reflashed boot.img and everything was ok. but i think its not 100% safe flashing with s-on. or am i wrong?
sorry for bad english.
This looks awesome, I'm so gonna use this 
Edit: Seems I unlocked bootloader, but I can't get recovery to work :/ Only get that HTc screen with red text. Seems i'll have to it manually (I've read the whole thread).
Edit2: Done it using Torxx thread
Edit: Seems I unlocked bootloader, but I can't get recovery to work :/ Only get that HTc screen with red text. Seems i'll have to it manually (I've read the whole thread).
Edit2: Done it using Torxx thread
Last edited:
v1.1 Released! 6-11-2012
- Removed all old CWM/Stock Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Added TWRP 2.1.7
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
Download is in Post 2.
- Removed all old CWM/Stock Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Added TWRP 2.1.7
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
Download is in Post 2.
Can I translate your tuto & your prog here: http://forum.frandroid.com/forum/362-htc-one-s/
It would be great for Frensh users.
Thanks
It would be great for Frensh users.
Thanks
Hey, I just got my hands on a phone that seems to be stuck in the exact same situation (HTC logo and "this build is for development purposes only do not distribute...") Since I'm new to HTC I was looking for the easiest way to restore the phone and I found cannondale0815's solution involving the aio-toolkit. So I was wondering if the toolkit method has any huge advantages over the other (Torxx's), and of course, which one would be easier to complete?
First of all, huge thank you, for your work man, keep it up!
I'm planning to try and revert my phone to stock from the above situation but since I'm new to HTC I wasn't sure if I have to boot up the phone first holding Vol Down or I can just plug it via USB and execute Boot into Bootloader using the toolkit?
This looks awesome, I'm so gonna use this
Edit: Seems I unlocked bootloader, but I can't get recovery to work :/ Only get that HTc screen with red text. Seems i'll have to it manually (I've read the whole thread).
Edit2: Done it using Torxx thread
First of all, huge thank you, for your work man, keep it up!
I'm planning to try and revert my phone to stock from the above situation but since I'm new to HTC I wasn't sure if I have to boot up the phone first holding Vol Down or I can just plug it via USB and execute Boot into Bootloader using the toolkit?
Last edited:
splash screen
guys i get this error while trying to go to recovery
" this build is for deve purposes only do not distribute ,,,,,, "
why is that ? and what should i do !?
by the way, during the rooting process with the toolkit my phone had turned back to factory settings by it self !
guys i get this error while trying to go to recovery
" this build is for deve purposes only do not distribute ,,,,,, "
why is that ? and what should i do !?
by the way, during the rooting process with the toolkit my phone had turned back to factory settings by it self !
Can I translate your tuto & your prog here: http://forum.frandroid.com/forum/362-htc-one-s/
It would be great for Frensh users.
Thanks
You can make a tutorial in French but do not copy and paste the thread there. This program will only be on XDA-Developers.com and Android-Dev.us. Tutorials on using is fine with me.
You can use the command from my toolkit if you just wanna be lazy lol. That is why I put it there.
I don't have the phone so I can't test the recovery or what it says. It is an official recovery though. When you sent the token ID to your phone, did you not read what the screen said? It said that it will wipe your phone back to factory settings for security purposes..
Used your tool works great but I wanted to flash back to stock recovery and see it no longer is an option time to read up a bit more Thanks for the tool worked like a champ
Hello
First Thanks for the tool
But I have a problem.
I unlocked the bootloader, and now, I can't do anything because during all manipulation with the tool, all "cmd" windows say "device not found".
I tried:
_to reinstall driver
_I put usb debugging
I doesn't work, I can't install recovery ...
Thanks for your help
First Thanks for the tool
But I have a problem.
I unlocked the bootloader, and now, I can't do anything because during all manipulation with the tool, all "cmd" windows say "device not found".
I tried:
_to reinstall driver
_I put usb debugging
I doesn't work, I can't install recovery ...
Thanks for your help
Use this CWM :
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
This one worked for me, just rename it to recovery.img and use all in one tool kit and install!
http://www.modaco.com/topic/353006-...ch-recovery-for-the-htc-one-s-stock-download/
This one worked for me, just rename it to recovery.img and use all in one tool kit and install!
I just want to guve the OP a huge
THANK YOU!!!
I really appreciate the time and work you put into this program.
It took me an hour to get everything working (I went and tripple read every step to avoid bricking the phone in any way)
This was super easy and Great. Thank you!
THANK YOU!!!
I really appreciate the time and work you put into this program.
It took me an hour to get everything working (I went and tripple read every step to avoid bricking the phone in any way
)This was super easy and Great. Thank you!
I just want to guve the OP a huge
THANK YOU!!!
I really appreciate the time and work you put into this program.
It took me an hour to get everything working (I went and tripple read every step to avoid bricking the phone in any way
This was super easy and Great. Thank you!
Super glad you enjoyed using it and it made you happy! Also, great job on reading everything! Many people still don't read a thing lol.
want to give u much props.....
unlocked bootloader, flashed recovery, rooted phone, made a backup of current info...
took less than 30 minutes.....
unlocked bootloader, flashed recovery, rooted phone, made a backup of current info...
took less than 30 minutes.....
sorry im new to htc android but when i try to get "token" i get this error?
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
EDIT, some reason it took 4 tries to get it but its done. ty op
Error Code: Invalid Bootloader Token Length.
Error Reason: The submitted Token appears to be the wrong length and won't work.
EDIT, some reason it took 4 tries to get it but its done. ty op
Last edited:
hi,
sorry for the noob question, but can I use this method to root the One S with Snapdragon S3 Chip? currently, some people are reporting that they can't do hard reset or go into recovery after using other methods to root the S3 devices. But I haven't seen any reports like that on your thread.
just to make sure before I root my phone.
sorry for the noob question, but can I use this method to root the One S with Snapdragon S3 Chip? currently, some people are reporting that they can't do hard reset or go into recovery after using other methods to root the S3 devices. But I haven't seen any reports like that on your thread.
just to make sure before I root my phone.
Last edited:
Getting strange error when using this kit. When trying to use the commands at the bottom like boot into bootloader. They never work. Even though i was afet unlocking the phone still says device not found.
Also when trying to falsh recovery. It says recovery sent but then when the phone reboots and get the htc warning(red writing at bottom of screen) then get bacl screen for about 5 seconds and then the phone just reboots without going into recovery.
Also when trying to falsh recovery. It says recovery sent but then when the phone reboots and get the htc warning(red writing at bottom of screen) then get bacl screen for about 5 seconds and then the phone just reboots without going into recovery.
hi,
sorry for the noob question, but can I use this method to root the One S with Snapdragon S3 Chip? currently, some people are reporting that they can't do hard reset or go into recovery after using other methods to root the S3 devices. But I haven't seen any reports like that on your thread.
just to make sure before I root my phone.
Hi
Unfortunatly it seems that it doesn't work with S3. I've not been able to boot into recovery even using this All-in-One-tool.
It weird cause i used hansoons v1.0 and it worked but v1.1 i dowloaded this morning and wont work. I relocked bootloader and installed a ruu to get phone back to stock but now i am rooting again(long story)
Ill have a go again prob have to relock phone and try a different way again.
- Status
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
497Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
I would like to add for those that like my toolkit, PLEASE DO NOT POST IT ELSEWHERE WITHOUT MY PERMISSION!
I have seen multiple sites who copy and paste my work to their site! If I do not approve of it, then do not do it! it will discourage me from adding updates since it is being used for their own benefits!
tl;dr.
If you post my work without permission, don't expect updates!
I created an easy to use GUI program for the HTC Amaze and I decided to make one for the HTC One S. I spent a good over 10+ hours to learn how to script, watch videos on how to do it, working on it during school when I should have been listening lol and all that fun stuff. I am going to fix it and up and add more updates to it. You CAN place requests and I will try to fulfill it!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader (after it enters into bootloader, press the power button to enter Fastboot)REMOVED. No longer necessary.
- Get Token ID.Register at HTCDev, login to the site and submit the Token ID here.Buttons have been replaced and include links.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Install Recoveries
- User Provided Recoveries
- TWRP 2.5.0.0 (S3 Model)
- TWRP 2.5.0.0 (S4 Model)
- TWRP 2.5.0.0 (Special Edition 64GB Model)
- User provided kernels
- Link to PM me if you need a phone unlocked (XDA)
- Link to the One S Development thread (XDA)
- Boot Into Recovery
- Boot into Bootloader
- Relock Bootloader (must be in fastboot)
- APK Batch Installer (Credits to hamsteyr)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Mods of the forum!
- Devs for making us ROMS!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
DONATIONS132Downloads
Mod edit: Download links removed
Changes
V1.0 Released! 4-17-2012
- Initial Release
v1.1 Released! 6-11-2012
- Removed all old CWM/Stock Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Added TWRP 2.1.7
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
V1.2 Released 10-7-12
- Updated TWRP to 2.2.2.0
- Updated CWM to 5.8.3.1 Touch
- Updated Chainfire's SuperSU to 0.96
- Cleaned up a little code on my end
v2.0 Released 11-10-2012
- Updated TWRP 2.2.0 to 2.3.1.0 for S4 models
- Added TWRP support for S3 Models!
- Updated SuperSU from 0.93 to 0.97
- Added more info to my scripts so it would be easier to understand how to do things
- Removed a few links
v3.0 Released 12-23-2012
- Major Overhaul
- Users can now select their own recovery, kernel and unlock_code.bin. You no longer need to place it in a the data folder. Just browse for it
- Removed a lot of .bat scripts and integrated it in the program
- Updated SuperSU to 0.99
- Removed CWM
- Added TWRP for the Special Edition 64GB model
- Updated TWRP to 2.3.3.0 (S3 and S4)
- Added a few links
- Added ADB sideload (for use in TWRP)
This Update took FOREVER to do, but I did it for you guys!!!
v3.1 Released! 1-23-2013
- Fixed a bug where when you want to get your token ID, it'll boot into recovery rather than bootloader.
- When you want to relock the bootloader, it'll boot into bootloader and then lock it.
- Added a link to the factory RUU for Ville,VilleC2,VillePlus.
- Added Check CID feature
- Added a way to flash RUU Zip files
- Automated a few commands. No longer need to use the boot into bootloader then use the command to flash a kernel/recovery/unlock_code.bin
- Added more clarity
v3.3 Released! 1-30-2013
- Updated all TWRP recoveries to 2.4.0.0
- Updated SuperSU from 0.99 to 1.02
v3.3.1 Released! 2-1-2013
- Updated all TWRP recoveries to 2.4.1.0
- Updated SuperSU from 1.02 to 1.04 <--- This should fix the root issues now!
v3.4 Released! 3-2-2013
- Updated drivers to support Windows 8
- Updated all TWRP to 2.4.3.0
- Updated SuperSU to v1.20
- Removed the kernel section and added the kernel flashing under the Extras section
- Added new commands: GetVar All, Check CID
- Added S-Off ONLY commands: Write CID, Return to S-ON
- Added links: CID list, S-Off thread, SuperCID thread
- Added a section to S-Off the phone.
NOTE: I did not add any of the files from the S-Off thread/exploits to my toolkit. I added the official links to download the files but the files are not actually within my toolkit. Therefore, I did not violate what Jcase and beaups said since I did not incorporate the files to my toolkit.
v3.5 Released! 4-9-2013
- Updated HTC Drivers
- Updated all TWRP recoveries to 2.5.0.0
- Added 2 links (1 to follow me on Twitter and 1 to a YouTube video on how to ask for help properly)
- Added an Erase Cache command
v4.0 Released! 7-10-2013
- Removed Drivers and replaced it with a link (decreases size by 15mb)
- Updated all TWRP to 2.6.0.0
- Added Phil's CWM
- Fixed the Your Own Recovery Script.
- Updated SuperSU to 1.41
- New File Hosting service and added the links to my toolkit files in the program.
- Added a referral program.57Bugs
- Directory has to have one word.
Ex:
Looking to add in the future
- Kernels
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.3218v3.4 Released! 3-2-2013
- Updated drivers to support Windows 8
- Updated all TWRP to 2.4.3.0
- Updated SuperSU to v1.20
- Removed the kernel section and added the kernel flashing under the Extras section
- Added new commands: GetVar All, Check CID
- Added S-Off ONLY commands: Write CID, Return to S-ON
- Added links: CID list, S-Off thread, SuperCID thread
- Added a section to S-Off the phone.
NOTE: I did not add any of the files from the S-Off thread/exploits to my toolkit. I added the official links to download the files but the files are not actually within my toolkit. Therefore, I did not violate what Jcase and beaups said since I did not incorporate the files to my toolkit.
Download is in Post 2.
