[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]

Search This thread

acolwill

Senior Member
Just saw the heat on the GT-P6210 UK firmware release and checked on Samfirmware.

Flashed this using Mobile ODIN directly OVER the KL3 deodexed firmware, no major issues so far (unable to set voicemail number).
All settings/prefs/apps preserved

Download link from Hotfile, feel free to mirror elsewhere

http://www.hotfile.com/dl/162811167/9e67b52/P6200XXLQ1_P6200OXALQ1_ATO.zip.html

Beware, extracted, this file is nearly 850Mb in size

Also, thanks to anyone who roots this!

Aaron.

P.S. Screenshot
https://plus.google.com/u/0/111032879558038139743/posts/aD54hVuaVBz

-----

** UPDATE **

Brand new UK P6200 firmware available dated November 2012
PDA: P6200XXLQ7
CSC: P6200XEULP1

http://www.hotfile.com/dl/179423658/bf830d8/P6200XXLQ7_P6200XEULP1_XEU.zip.html

Same as previous. I flashed this directly over my previous firmware using Mobile Odin Pro. I had to flash SuperSU binaries afterwards to gain proper root access.
 
Last edited:

ali_ge

Senior Member
Apr 27, 2011
151
11
riyadh
how much it take time, i flash with mobile odin about 20 minute ago and my tab still on samsung logo !
 

Justinhopaolo

Senior Member
May 15, 2011
1,567
141
you need to use pc + odin to flash this firmware. it doesn't require external sdcard. it is different when you flashing custom ROM, you need external sdcard to put the zip file.

Hi I'm sorry, I hope its not too much of a drag for you. Bit can you give me steps?

I already have the mobile Odin.

Sent from my GT-P6200 using xda premium
 

motosuki

Senior Member
Jun 5, 2011
56
38
Pontianak
Hi I'm sorry, I hope its not too much of a drag for you. Bit can you give me steps?

I already have the mobile Odin.

Sent from my GT-P6200 using xda premium

1. download samsung kies to get the correct driver for gt-p6200
2. download odin3 v.1.85
3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot to system

if it's not....

18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
19. turn off your tablet.
20. press volume up + power button about 5 seconds.
21. do wipe cache / factory reset
22. reboot to system
23. it should be booting to system

if it's not...

contact nearest samsung service center
 

Justinhopaolo

Senior Member
May 15, 2011
1,567
141
1. download samsung kies to get the correct driver for gt-p6200
2. download odin3 v.1.85
3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
4. install Kies
5. extract Odin3-v1.85.zip
6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
7. turn off your tablet
8. enter download mode (press volume up button + power button about 5 seconds)
9. plug the usb cable to your pc and your tablet
10. run Odin3 v1.85.exe
11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
13. make sure to uncheck re-partition
14. click start
15. odin processing takes about 5 minutes, wait patiently.
16. if there's a "SUCCEED" in the message box, your tablet will restart
17. wait about 10 minutes, you should get your ICS boot to system

if it's not....

18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
19. turn off your tablet.
20. press volume up + power button about 5 seconds.
21. do wipe cache / factory reset
22. reboot to system
23. it should be booting to system

if it's not...

contact nearest samsung service center
is this the method if i want to flash other roms, like cm9?
 
  • Like
Reactions: Zool_7

motosuki

Senior Member
Jun 5, 2011
56
38
Pontianak
is this the method if i want to flash other roms, like cm9?

you need to use CWM recovery.

1. download CWM recovery
2. copy CWM file into your external sdcard
3. turn off your tablet
4. enter recovery mode, press volume up + power button about 5 minutes
5. use volume button to navigate and power button to choose
6. choose "apply update from external storage"
7. find p6200_CWMR_20111214.zip
8. push power button to choose, and wait until instalation finished
9. your tablet will reboot

to install CM9

1. download custom rom you want to install
2. put it in your external sdcard
3. turn off your tablet
4. enter recovery mode, press volume up + power button about 5 minutes
5. use volume button to navigate and power button to choose
6. choose "install zip from sdcard" and "choose zip from internal sdcard"
7. find the custom rom zip file
8. push power button to choose, and wait until instalation finished
9. choose go back until you find wipe data / factory reset
10. choose yes
11. choose wipe cache partition
12. choose yes
13. reboot system now

that should do it... and make sure you use the right custom ROM for your tablet model.
 
Last edited:

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    Just saw the heat on the GT-P6210 UK firmware release and checked on Samfirmware.

    Flashed this using Mobile ODIN directly OVER the KL3 deodexed firmware, no major issues so far (unable to set voicemail number).
    All settings/prefs/apps preserved

    Download link from Hotfile, feel free to mirror elsewhere

    http://www.hotfile.com/dl/162811167/9e67b52/P6200XXLQ1_P6200OXALQ1_ATO.zip.html

    Beware, extracted, this file is nearly 850Mb in size

    Also, thanks to anyone who roots this!

    Aaron.

    P.S. Screenshot
    https://plus.google.com/u/0/111032879558038139743/posts/aD54hVuaVBz

    -----

    ** UPDATE **

    Brand new UK P6200 firmware available dated November 2012
    PDA: P6200XXLQ7
    CSC: P6200XEULP1

    http://www.hotfile.com/dl/179423658/bf830d8/P6200XXLQ7_P6200XEULP1_XEU.zip.html

    Same as previous. I flashed this directly over my previous firmware using Mobile Odin Pro. I had to flash SuperSU binaries afterwards to gain proper root access.
    11
    Hi I'm sorry, I hope its not too much of a drag for you. Bit can you give me steps?

    I already have the mobile Odin.

    Sent from my GT-P6200 using xda premium

    1. download samsung kies to get the correct driver for gt-p6200
    2. download odin3 v.1.85
    3. download Stock Firmware Austria - P6200XXLQ1_P6200OXALQ1_ATO.zip
    4. install Kies
    5. extract Odin3-v1.85.zip
    6. extract P6200XXLQ1_P6200OXALQ1_ATO.zip until you get file P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
    7. turn off your tablet
    8. enter download mode (press volume up button + power button about 5 seconds)
    9. plug the usb cable to your pc and your tablet
    10. run Odin3 v1.85.exe
    11. check if pc recognize your tablet by seeing ID:COM turn yellow and "Added!!" message in the message box lower left odin window.
    12. klik PDA button and put P6200OXALQ1_P6200XXLQ1_P6200XXLQ1_HOME.tar.md5
    13. make sure to uncheck re-partition
    14. click start
    15. odin processing takes about 5 minutes, wait patiently.
    16. if there's a "SUCCEED" in the message box, your tablet will restart
    17. wait about 10 minutes, you should get your ICS boot to system

    if it's not....

    18. if your tablet didn't boot, you need to wipe cache / factory reset in the recovery mode
    19. turn off your tablet.
    20. press volume up + power button about 5 seconds.
    21. do wipe cache / factory reset
    22. reboot to system
    23. it should be booting to system

    if it's not...

    contact nearest samsung service center
    5
    is this the method if i want to flash other roms, like cm9?

    you need to use CWM recovery.

    1. download CWM recovery
    2. copy CWM file into your external sdcard
    3. turn off your tablet
    4. enter recovery mode, press volume up + power button about 5 minutes
    5. use volume button to navigate and power button to choose
    6. choose "apply update from external storage"
    7. find p6200_CWMR_20111214.zip
    8. push power button to choose, and wait until instalation finished
    9. your tablet will reboot

    to install CM9

    1. download custom rom you want to install
    2. put it in your external sdcard
    3. turn off your tablet
    4. enter recovery mode, press volume up + power button about 5 minutes
    5. use volume button to navigate and power button to choose
    6. choose "install zip from sdcard" and "choose zip from internal sdcard"
    7. find the custom rom zip file
    8. push power button to choose, and wait until instalation finished
    9. choose go back until you find wipe data / factory reset
    10. choose yes
    11. choose wipe cache partition
    12. choose yes
    13. reboot system now

    that should do it... and make sure you use the right custom ROM for your tablet model.
    3
    Root is easy for this firmware!

    When flashing via Mobile Odin, clear the flash for recovery image (i.e. do not flash recovery)
    Then flash SuperSU afterwards via recovery

    http://download.chainfire.eu/204/SuperSU/CWM-SuperSU-v0.94.zip
    3
    i'm mirroring the ICS Austria Firmware on media fire. Feel free to download.

    part1
    - part2 - part3