[Kernel][7/25/12][Beta 13] KozmiKKernel [Sweep2Wake][OC][Fully Customizable]
- Thread starter kozmikkick
- Start date
-
- Tags
- development
Any progress on the install script? I can't wait to remove this Rom n try a sensation base that's working. Also will u have the 4 signal bars or the 5 signal bars in your up comming Rom release?
Sent from my HTC PH39100 using xda app-developers app
Sent from my HTC PH39100 using xda app-developers app
Good. I got it working. Itll be released tomorrow.
Four bars.
Sent from my HTC Holiday using xda premium
Rom is uploading now. After its done ill post it in a new thread as well as updating this thread with beta 13 
Sent from my HTC Holiday using xda premium
Sent from my HTC Holiday using xda premium
Oh hell yeah just in time for when I get off work!
Sent from my De-Sensed HTC Vivid using xda premium
Sent from my De-Sensed HTC Vivid using xda premium
It's going to be a few hours before the roms are finished uploading so I decided to give you guys beta 13 first
Sent from my HTC Holiday using xda premium
Sent from my HTC Holiday using xda premium
It's going to be a few hours before the roms are finished uploading so I decided to give you guys beta 13 first
Sent from my HTC Holiday using xda premium
and thus i begin charging my phone...preparing for new awesomeness
much thanks and appreciation goes to you kozmikkick, thanks for keeping the vivid development going strong here on xda (also...after i buy me a new hdd ill throw you a donation...
)Reset my code back to rc2 and the added in thermald and mpdecision by showp. Updated WiFi drivers to the one v. Fixed USB charging. Updated code from pyramid wwe 3.33 to optimize it for my uploading roms that are based on 3.33 firmware. It's all in my changelog
Sent from my HTC Holiday using xda premium
So I'm using the darkraider rom with kozmikkernel beta 7 and I think I would like to update my kernel to the latest beta 13 how do I go about doing that, I have never updated a kernel before....do I just flash the new one in recovery like I do roms? And do I have to wipe anything?
HTC Vivid
s-off
DarkRaider 1.5.5
KozmikKernel Beta 7
HTC Vivid
s-off
DarkRaider 1.5.5
KozmikKernel Beta 7
KozmiKKernel Stockish has been posted in the OP. It does not have OC, sweep2wake or much else. It is for a purely stockish experience with some minor tweaks.
When you flash it in recovery you will have three options to choose from. Based on ramdisk. Likewise if you are s-on. There are two boot.img in the zip. If you're on a holiday based rom flash the holiday.img in fastboot or the sensation.img if you're on a sensation based rom. Remember though you still must flash the zip in recovery afterwards so that the system gets prepared properly and so that you have the pertinent modules installed.
When you flash it in recovery you will have three options to choose from. Based on ramdisk. Likewise if you are s-on. There are two boot.img in the zip. If you're on a holiday based rom flash the holiday.img in fastboot or the sensation.img if you're on a sensation based rom. Remember though you still must flash the zip in recovery afterwards so that the system gets prepared properly and so that you have the pertinent modules installed.
Thanks A Lot Kozmikkick
I already flashed the same with Holics Rom, your stockish kernel is awesome. at 1.2Ghz it gave me Quadrant score of 3013 and Nenamark2 - 46
---------- Post added at 03:00 PM ---------- Previous post was at 02:52 PM ----------
I even tried playing MC3, it runs very smooth with your stockish kernel, because when I had Holics kernel at one mission the game gets very laggy, but with stockish its pretty cool
I already flashed the same with Holics Rom, your stockish kernel is awesome. at 1.2Ghz it gave me Quadrant score of 3013 and Nenamark2 - 46
---------- Post added at 03:00 PM ---------- Previous post was at 02:52 PM ----------
I even tried playing MC3, it runs very smooth with your stockish kernel, because when I had Holics kernel at one mission the game gets very laggy, but with stockish its pretty cool
thanks very very very thanks, the best kernel for VIVID, absolutely,
Holics ROM with this kernes is amazing
best regards
CPU SPY App gives ERROR
After flashing the Stockish Kernel, the Cpu Spy app is gives me a message " No States file found. Are you sure your Phone is compatible? If you are running a custom ROM or kernel, try contacting its developer to inform him that the states file is not readable."
Can you look into this and get it fixed.. pl...z I love Cpu Spy App.
After flashing the Stockish Kernel, the Cpu Spy app is gives me a message " No States file found. Are you sure your Phone is compatible? If you are running a custom ROM or kernel, try contacting its developer to inform him that the states file is not readable."
Can you look into this and get it fixed.. pl...z I love Cpu Spy App.
After flashing the Stockish Kernel, the Cpu Spy app is gives me a message " No States file found. Are you sure your Phone is compatible? If you are running a custom ROM or kernel, try contacting its developer to inform him that the states file is not readable."
Can you look into this and get it fixed.. pl...z I love Cpu Spy App.
There is nothing to fix... stockish=damn close to stock. Stock doesn't have CPU times enabled so neither does mine.
I will possibly consider turning it on in the future but don't get your hopes up. My stockish kernel runs beautifully as it is.
Sent from my HTC One X using xda premium
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
32KozmiKKernel
Features:
Sweep2Wake - Coded and Produced by the great Showp1984
Fast Charge - chad0988
TUN
CIFS
Fully customizable via aroma install, no longer need a cpu manager!
Adjustable Voltage Tables (750000 to 1450000) Be careful if you adjust!
Lagfree Governor
Badass Governor - Coded and Produced by the great Showp1984
Overclocked GPU 2D and 3D Core - Only in Beta 7 and some lower builds
Added VR, SIO, and BFQ I/O Schedulers in addition to the standard NOOP,CFQ,and DEADLINE.
Faqs:
mpdecision and thermald
Check out Bricked Kernel. The second post has a good read about the mpdecision and thermald that is now built into the kernel courtesy of showp1984.
Badass Governor
"Badass removes all of this "fast peaking" to the max frequency. On a typical system the cpu won't go above 918Mhz and therefore stay cool and will use less power. To trigger a frequency increase, the system must run a bit @ 918Mhz with high load, then the frequency is bumped to 1188Mhz. If that is still not enough the governor gives you full throttle. (this transition should not take longer than 2-5 seconds, depending on the load your system is experiencing)
Badass will also take the gpu load into consideration. If the gpu is moderately busy it will bypass the above check and clock the cpu with 1188Mhz. If the gpu is crushed under load, badass will lift the restrictions to the cpu.
Please remember: Due to it's nature, this is not a benchmark governor. It is meant as a governor that gives you a smooth experience while saving battery, lots of it. " - As quoted from Showp1984's Bricked Kernel Thread
Sweep2Wake
No long do you need to use your power button to wake your phone. To wake your phone sweep your finger from the home button to the search button. Likewise to put your phone to sleep, sweep your finger from the search button to the home button.
Fast Charging
Starting in Beta 6 fast charging is now an option. To enable it all you need to do is run the following in adb shell, in a terminal on your phone, or in the terminal in System Tuner:
Code:echo "1" /sys/kernel/fast_charge/force_fast_charge
Likewise to should you wish to disable it you can run:
Code:echo "0" /sys/kernel/fast_charge/force_fast_charge
Release Candates will have an optional download that does not have Sweep2Wake for those that do not want it.
Should be compatible with any rooted ICS sense rom.
You can use System Tuner voltage tables.
As with anything you flash to your phone there is always a risk. You are taking responsibility into your own hands when you flash this. It works perfectly on my phone but your hardware may not be able to withstand overclocking. It should work fine but don't complain if it breaks your phone.
If you decide that this kernel isn't quite for you yet you can always revert to the stock kernel
Release Candidate Downloads (Stable):
RC 2
RC 1
RC 1 with Sweep2Wake
RC 1 - S-Off
RC 1 with Sweep2Wake - S-Off
Beta Downloads:
Beta 13
Stockish Downloads:
Stockish
Installation:
I am no longer supporting phones that are not S-Off. Get S-Off now Then just flash zip in recovery and select your options!
If your phone does not have S-Off, there are some older versions of my rom in the downloads that are built into the boot.img and may be flashed via fastboot. Don't ask which ones can be done with this method. You need flash the boot.img contained within using fastboot from your bootloader:
Code:fastboot flash boot boot.img
CPU Frequency / Voltage Table:
Code:192000: 800000 384000: 825000 432000: 850000 486000: 850000 540000: 875000 594000: 875000 648000: 900000 702000: 900000 756000: 925000 810000: 950000 864000: 975000 918000: 975000 972000: 1000000 1026000: 1000000 1080000: 1025000 1134000: 1025000 1188000: 1050000 1242000: 1075000 1296000: 1100000 1350000: 1125000 1404000: 1150000 1458000: 1150000 1512000: 1175000 1566000: 1200000 1620000: 1225000 1674000: 1250000 1728000: 1275000 1782000: 1300000
Change Log:
Beta 13
Stockish
Credits:
klquicksall
Virtuous Dev Team
showp1984
Faux123
Chad0989
LeeDroid
Rafyvitto
HTCDev
Github:
My Source
Sweep2Wake Video
Benchmark:
9Working out issues with install script and then I'll release elegancia ROM with a new kernel as well as updating the kernel here with beta 13
Sent from my HTC One X using xda premium8Well good news. I've successfully programmed in cmdline parsing for fast charging. This means that you will be able to enable it or disable it when you install the kernel
I just have a one more piece to add to it and it will be ready to be released. Probably be later to night or tomorrow afternoon at the latest.7Beta 7 is now posted in the OP!
I did not have time to get fast charging setup working properly via install so you still need to enable it in a terminal program as the Faqs in Post 1 indicate
I'm tired and I need to get some sleep. I will clean up my post probably Wednesday when i have time to work on getting Fast Charge working on install.
Have fun! And select your options wisely You do not need a cpu manager now. The install process lets you choose pretty much any option you would normally need a manager to do.6
Good. I got it working. Itll be released tomorrow.
Four bars.
Sent from my HTC Holiday using xda premium
