Ok my friend but on the next release. You requested this cosmetic change 1 minute after I released the version 6!
No problems
Thanks for V6 I am out of thanks for today 
No problems
Thanks for V6 I am out of thanks for today 
Hello all!
Here is the new version 6.
Added : fix permissions in nativeSD roms
Added : clear Dalvik cache in nativeSD roms
Added : kernel update(*) for nativeSD ONLY roms (thank you master Tytung for the guidance)
Enjoy and if you like it please press [Thank you] button.
(*) How to update kernel :
1) download the zip file of the kernel (of course...)
2) rename it to [update.zip] and put it in the sdcard/nativeSD folder
3) run the nativeSDmultiboot app and go to tools -> update kernel
4) reboot IMMEDIATELY! (this is really important to avoid any force closes...)
Nice work m8. :good:
Just a tip, maybe after we press the update button, the reboot could be automatic.
IE, after the kernel sucessfully updated, some kind of message "Your phone will now reboot." and after 2/3 seconds auto reboot, and if it fails for some reason a message with "Update failed, please check if you follow all the instrutions"
Something like this. Just a tip.
EDIT:
I'm geting errors, and the kernel flash fails.
Anyone sucessfull update the kernel with the app?
Last edited:
poyensa
Retired Forum Mod / Retired Recognized Developer
Hello all!
Here is the new version 6.
Added : fix permissions in nativeSD roms
Added : clear Dalvik cache in nativeSD roms
Added : kernel update(*) for nativeSD ONLY roms (thank you master Tytung for the guidance)
Enjoy and if you like it please press [Thank you] button.
(*) How to update kernel :
1) download the zip file of the kernel (of course...)
2) rename it to [update.zip] and put it in the sdcard/nativeSD folder
3) run the nativeSDmultiboot app and go to tools -> update kernel
4) reboot IMMEDIATELY! (this is really important to avoid any force closes...)
no luck here trying to update kernel on MIUIJB nativeSD booting from WM (CLRCAD+HARET), the screen show error messages in every step and even the final message is updated kernel successfully, the kernel was not updated. One question please ... rom name has to changed in install.sh file, or using your apk it is not necessary? TIA
the problem is weird. how many bad blocks on his Nand flash ?
The NativeSD ROM will not touch the NAND but every time the NativeSD ROM boot up the NAND flash will be detected by the kernel, but it should not write anything to the NAND. I will check the NAND driver to confirm it.
It worked for me using magldr on cm10 nativeSD.
update.zip in nativeSD folder
No error messages apart from warning to reboot immediately.
The zip file contained "MIUIJB" in install.sh from previous install, so datagr has included this name changing script.
Nice job.
Try this:
Go to app, then go to switch, then click the running rom, then go to tools and try updating the kernel.
Also check please if the tytung zip has the same folders init with the kernel that you try to update.
The script that is executing is for tytung kernel so maybe that's the problem.
Hello all!
Here is the new version 6.
Added : fix permissions in nativeSD roms
Added : clear Dalvik cache in nativeSD roms
Added : kernel update(*) for nativeSD ONLY roms (thank you master Tytung for the guidance)
Enjoy and if you like it please press [Thank you] button.
(*) How to update kernel :
1) download the zip file of the kernel (of course...
Thank You very much for your great work! I got error messages chmod 644 error ? But finally got the message success...
Ad
Sent from my HTC HD2 using xda app-developers app
Last edited:
What rom do you use? This option works only to tytung 3.5 kernel.
---------- Post added at 07:45 PM ---------- Previous post was at 07:40 PM ----------
Please post any kernel that you wish to update so I will add them in the app.
For now we have only tytung new kernel support.
Hi datagr,
I am using CM10 - Unofficial NativeSD (Kernel: 2.6.32-ics_tytung_HWA-r3.3_JB)...After reboot my wlan is not longer working...uh...
My next question would be: how could I repair my installation? Can I just reinstall the rom?
Last edited:
you can use an app from playstore sd increase...
https://play.google.com/store/apps/details?id=com.sdincrease.it&hl=de
N00b to NativeSD here. I never got on the Nand/Magldr boat so I have always run my SD roms with a Haret loader.
I used to use Exceller's excellent
Cheers
Tom
Sent from my HTC HD2 using xda premium
I don't get it
Hi folks.
I'm so lost getting this to work. Although I use custom roms for a very long time now, I'm not getting nativeSD to work. I am using NAND-ROMs for a long time now and the procedure to flash a ROM like this seems to differ a lot from this method.
So what do I have to do?
Right now I have MAGLDR installed with a 170MB system partition. I just don't know how to install this ext4-recovery via DAF.exe since this needs a flash.cfg which isn't in the zip file, and flashing the recovery_leo.img with another configuration cfg gets me an error that reads "cannot read ramdisk image".
So what are the necessary steps to flash the ext4-recovery when I have a working NAND Rom installed?
Thanks for your help.
Hi folks.
I'm so lost getting this to work. Although I use custom roms for a very long time now, I'm not getting nativeSD to work. I am using NAND-ROMs for a long time now and the procedure to flash a ROM like this seems to differ a lot from this method.
So what do I have to do?
Right now I have MAGLDR installed with a 170MB system partition. I just don't know how to install this ext4-recovery via DAF.exe since this needs a flash.cfg which isn't in the zip file, and flashing the recovery_leo.img with another configuration cfg gets me an error that reads "cannot read ramdisk image".
So what are the necessary steps to flash the ext4-recovery when I have a working NAND Rom installed?
Thanks for your help.
you can use an app from playstore sd increase...
https://play.google.com/store/apps/details?id=com.sdincrease.it&hl=de
thanks ! but "if you reboot/turn off your device, you lose the setting that you did" - any way to make the setting permanent without third-party app?
EDIT: putting (used ES File Explorer)
#!/system/bin/sh
echo "2048" > /sys/devices/virtual/bdi/179:0/read_ahead_kb
into file "99sdcardreadfix" in /system/etc/init.d and setting permissions to 777 seems to work.
Found in http://xdaforums.com/showthread.php?t=1010807
Last edited:
Go to
http://goo.im/devs/Xylograph/Various/Recoveries/NAND, download recovery_4EXT2.2.7_leo_nand.zip, put in on your SD and flash through your existing recovery like any ROM/kernel/fix...
More details here: http://xdaforums.com/showpost.php?p=31506141&postcount=562
Last edited:
Hi datagr,
I am using CM10 - Unofficial NativeSD (Kernel: 2.6.32-ics_tytung_HWA-r3.3_JB)...After reboot my wlan is not longer working...uh...
My next question would be: how could I repair my installation? Can I just reinstall the rom?
Yes, you can reinstall the rom. Which kernel did you update? Tytung 3.5 or another kernel?
Hi datagr!
I used tried this one: http://xdaforums.com/showpost.php?p=31958450&postcount=1075 tytung_HWA_kernel.20120924_22_41_NativeSD_jb.zip
With your app, should I take the nandversion?
...I think I am doing something wrong.
Thank you!
AD
Last edited:
Ok this is the problem!
You updated the kernel of securecrt.
No problem I will create an update for that.
It will be ready soon.
edit :
After I saw the zip of ics and jb from securecrt, I saw that they are exactly the same like tytungs!
So if you follow the guide I have posted, you will have no problem!
Last edited:
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
174This is an idea to make the HD2 faster and fancy, I worked with Xylograph to make it more usable and easy to implement by common users.
Index
- Post 1 Introduction
- Post 2 ROMs, Scripts, Installer template for Devs by Xylograph
- Post 3 Q&A
Introduction
We have SD ROMs for very long time, but I think most of the people should agree with me that the SD ROMs are slower than NAND ROMs. because the SD ROMs use system.ext4 and data.ext4 files to store all the ROM contant on the FAT partition, the IO access is the bottleneck.
My Class10 SD card has 10MB/s R/W speed, but the NAND flash R/W speed is only about 4MB/s. so if we can directly install the ROMs to SDCARD and boot from SDCARD we will get lots of benifits:
- Faster Read/Write speed than NAND ROMs
- Bigger data partition for user space (depends on how big the ext4 partition on SDCARD)
- Install servel ROMs at the same time. and each ROM share the same space
- Muilt-boot support, easy to switch between the ROMs been installed.
The NativeSD Rom is a new kind of ROM it needs an ext4 partition on your SDCARD.
This thread will tell you how to install a ROM to SDCARD and give some script templates for ROM Devs to make the ROM installer which can support install the ROM to NAND flash or SD/EXT4.
Install the ROM to SD/EXT4 will not effact the ROM(WM or Android) on NAND flash, NativeSD should support run from MAGLDR CLK or WM6.5(need test).
Important Notes:
Backup all the SDCARD content to PC before you create the ext4 partition on SDCARD.
Change Log:
05-09-2012 @2nd Post [05-09-2012] NativeSD Dual Installer v2 [nand/sdext][wip]
10-09-2012 Add NativeSD CM7 script template
13-09-2012 nativeSDMultiBoot Version4 Credits to datagr
20-09-2012 nativeSDMultiBoot Version5 Credits to datagr
26-09-2012 nativeSDMultiBoot Version6 Credits to datagr
30-10-2012 nativeSDMultiBoot Version9 Credits to datagr
30-10-2012 New initrd mod for NativeSD Credits to marco.palumbi133[05-09-2012] NativeSD Dual Installer v2 [nand/sdext][wip]
NativeSD Dual Installer v2
Keep in mind that this is a work in progress featuring a possibility to run a full nand rom on a SD-EXT partition..
Please check my current AOKP & PA jellybean ROMS or CM9ight ICS ROM for some 'NativeSD functionality' in action
Features:
- Compatible with every bootloader and stock OS
- Recovery package for users without Android on nand
Pre-Installation Requirements and recommendations:
- HTC HD2 Phone
- Sdcard with enough free space (performance may differ based on the quality of your card)
- 4EXT Recovery (Highly recommended)
- Primary Fat32 partition and Primary EXT4 partition
Downloads : (Please do not mirror stuff)
- Download 4EXT Recovery from here.
Pick the SD version if you would like to boot 4EXT Recovery from SD (unpack to your sdcard)
Pick the NAND version if you would like to flash the 4EXT Recovery on your NAND (flashable via recovery)
Users with non-working hardware keys can try the various touch recoveries I've ported , though I highly recommend 4EXT recovery.. - Dual_Installer_v2_example.zip (only for advanced users, unpack the contents to your computer)
Contents :
4EXTRecoverySD for users with no or a different recovery on nand:
Code:- Contains 4EXT Recovery ported for SD users. - Unpack to the root of your sdcard - Set your SD Boot to the Recovery folder or use clcad/haret to boot
4EXTRecoveryNAND for users who would like this recovery on nand:
Code:- Contains 4EXT Recovery for android NAND users - Flash it using DAF.exe (Magldr) cLK users can flash it using the HD2 toolkit
Dual Installer example Package (advanced users) :
Code:- Contains an example (not flashable!) of how I use this for my roms. - You can check all the stuff, folder structure and scripts. - I've tried to make the updater-script and aroma-config 'easy to read' - Placeholders with text on what to put where when porting stuff to NativeSD.
Installation Steps & Instructions:
Sdcard for NativeSD:
Code:1. First make sure you have at least 1 Fat32 partition and 1 EXT4 partition on your sdcard 2. If you don't have these partitions ?? [B]backup your sdcard[/B][COLOR="Red"][B] , because everything will be wiped from your sdcard when you create partitions and format them ![/B][/COLOR] 3a Use the [URL="http://goo.im/devs/Xylograph/Various/Recoveries"]provided 4EXT recovery (NAND or SD version)[/URL] to create the partitions and format them. 3b If you rather use a computer for creating and formatting partitions keep in mind that both partitions [B]must[/B] be primary partitions (not logical) 4. The recommended size of your EXT4 partition is depending on how many roms and apps you are going to install.. 512M is the minimal size.. 5. Restore/move the sdcard contents back to the Fat32 partition 6. (WP7 users) make sure the EXT4 partition is located @ /dev/block/mmcblk0p2 To check this mount your sd-ext partition in 4EXT recovery and use adb shell or QtADB shell and type [B]df[/B] 7. Your sdcard is now ready for NativeSD usage..
NativeSD Installation for Magldr NAND Android & WP7 users :
Code:1. WP7 and SD users set your SD BOOT directory to the 'Recovery' folder by choosing '10.services' , '1. Bootsettings' , 3. AD SD Dir in the Magldr menu. 2. Boot into (NAND or SD) 4EXT recovery. 3. Flash the ROM.zip package and follow instructions 4. Set your SD BOOT directory to the 'NativeSD' folder after flashing the ROM (see step 1) 5. Boot into the ROM and have fun..
NativeSD Installation for cLK NAND Android users : (thanks clio94)
Code:1. Copy the [URL="http://www.mediafire.com/?nhyausx0p5whu"]flash_bootv2.zip[/URL] to your sdcard. 2. Boot into cLK and make a sboot partition.Be aware that only clk from kokotas allows to make a sboot partition directly from device 3. Boot into recovery (4EXT recovery = recommended) and install rom by choosing sd-ext method 4. After installation finishes,dont reboot, but install flash_sbootv2.zip and then reboot to cLK 5. In cLK choose to boot from sboot and wait for the ROM to boot. 6. If you are stuck on the boot animation,try to wipe your ext partition and install the ROM again.
NativeSD Installation for Windows Mobile and other OS users :
Code:1. Boot into recovery by executing the usual clcad and haret stuff inside the Recovery folder. 2. Flash the ROM.zip package and follow instructions 3. Reboot and boot the ROM by executing the usual clcad and haret stuff inside the NativeSD folder.
RMNET or PPP ??? summary :
Code:- as of dual installer v2 you can choose your data connection during ROM installation - For Magldr users I recommend using the RMNET connection - For all other users I recommend using the PPP connection (default) - PPP connection should work for all users !
Switch between different NativeSD ROMS ?
Code:- If you want to use a previously installed/other NativeSD ROM ? - Copy the contents of that roms folder found inside the NativeSD folder to the root of the NativeSD folder (overwriting the kernel+ramdisk) - Boot to sd and that ROM will boot ! - Repeat the above steps when you want to switch again - In the future we want to make the above steps easier and possible with either a 'gscript' or an 'android app'
Previous Roms (Examples) featuring NativeSD and Dual Installer :
Code:- [URL="http://d-h.st/pFR"]PA_v1.992se_dual_installer_v2.zip[/URL] - [B][URL="http://tinyw.in/Xhft"]mirror[/URL][/B] (Flash via recovery) - md5: ce2138748c6b2cbc62848272acf92600 - [URL="http://d-h.st/p33"]AOKP_N2408se_dual_installer.zip (Magldr only!)[/URL] - [B][URL="http://tinyw.in/clMS"]mirror[/URL][/B] (Flash via recovery) - md5: 6a116ad3eebb0f92729af6954f0a9217
*** all flashing is at your own risk ! Always make backups in recovery and/or titanium backup ! ***
*** This is a NativeSD thread ! Please, Keep this thread NativeSD related and report issues with roms in the rom thread !!! ***
Thanks & Credits to : securecrt, Phoenix, clio94, LNE team and everybody I forgot !68Q&A
- How is the NativeSD ROM work?
To boot the Android from SD card, the old SD ROMs mount the system.ext4 and data.ext4 before the init(rename to init.android) thread is start. I changed the initrd.gz to make it mount the ext4 partition before the android init.android start. here is the main code for the init script
Code:echo "mount system and data partition on sdcard" # change the rom_name TO PA MIUI CM7 will support # to boot other system on SD/EXT4 # the system layout : # /NativeSD/NexusHD2/ # /system # /data # /PA/ # /system # /data # /MIUI/ # /system # /data # /app # the app dir is shared for all ROMs # # set the name of the rom to boot rom_name="PA" # mount the 1st (NativeSD) SD-EXT partition mkdir -p /NativeSD mount -t ext4 -o rw,noatime,nodiratime,barrier=0 /dev/block/mmcblk0p2 /NativeSD # mount the system data app dir mount --bind /NativeSD/$rom_name/system /system mount --bind /NativeSD/$rom_name/data /data # create app data/app dir mkdir -p /NativeSD/app mkdir -p /data/app mount --bind /NativeSD/app /data/app
So for the ROM Devs should create new initrd.gz which is different with the NAND version, use different rom_name distinguish with others the whole templete is in 2nd post by Xylograph
- How is the multi-boot works on NativeSD ROM?
Set the SD boot dir /sdcard/NativeSD in Magldr or CLK,the dir structure is
/sdcard/NativeSD/NexusHD2/zImage
/sdcard/NativeSD/NexusHD2/initrd.gz
/sdcard/NativeSD/PA/zImage
/sdcard/NativeSD/PA/initrd.gz
/sdcard/NativeSD/zImage
/sdcard/NativeSD/initrd.gz
The Magldr& CLK always read the /sdcard/NativeSD/zImage /sdcard/NativeSD/initrd.gz files to boot, so if you want to switch from PA to NexusHD2 just only need to copy the zImage & initrd.gz to the up layer dir, use the NativeSD ROM switch app made by datagr
- How to convert the NAND ROM to NativeSD ROM?
This is for Devs and advanced users only. For example if we got the NAND version of the NexusHD2 extract the zip file and replace 2 files and add 1 file will finish the convert.
/kernel/boot/initrd.gz
the initrd.gz is similar with the SD ROMs but need to change the init script to mount the ext4 partition
/META-INF/com/google/android/updater-script
the updater-script is used for CWM to execute the install process; execute install.sh before copy the system content to the ext4, here is the sample code
Code:package_extract_file("install.sh", "/tmp/install.sh"); set_perm(0,0, 0777, "/tmp/install.sh"); run_program("/tmp/install.sh"); show_progress(0.8, 80); if file_getprop("/tmp/nfo.prop","NativeSD") == "true" then package_extract_dir("kernel/boot", "/boot"); package_extract_dir("kernel/boot", "/boot_dir"); package_extract_dir("system", "/system"); ...... else ui_print("can't find ext4 partition on your SDcard"); ui_print("install failed"); endif;
/install.sh
Code:#!/sbin/sh # Set the ROM name ROM_NAME=NexusHD2 export ROM_NAME mmcblk0p2=`ls /dev/block/mmcblk0p2` # Mount the ext4 partition if [ $mmcblk0p2 == "/dev/block/mmcblk0p2" ] then mkdir -p /ext4p mkdir -p /sdcard/NativeSD/$ROM_NAME mkdir -p /boot /boot_dir mount -t ext4 /dev/block/mmcblk0p2 /ext4p mkdir -p /ext4p/$ROM_NAME/system /ext4p/$ROM_NAME/data mount --bind /ext4p/$ROM_NAME/system /system mount --bind /ext4p/$ROM_NAME/data /data mount --bind /sdcard/NativeSD/$ROM_NAME /boot mount --bind /sdcard/NativeSD /boot_dir #delete the old system rm -rf /system/* #clean the dalvik-cache rm -rf /data/dalvik-cache/* #all the dir has ready write some info for updater-script echo "NativeSD=true" >> /tmp/nfo.prop else #no ext4 partition found echo "NativeSD=false" >> /tmp/nfo.prop fi
- How to make ext4 partition on my SDCARD?
62nativeSDMultiBoot Version 10
Hello all,
Here is the latest version 10 of the app.
Change log :
----------------------------------------------------------------------------------------------------------------------------------------
Version 10 :
Fixed : Small aesthetic changes
Added : Website button
Added : Backup nativeSD rom
Added : Restore nativeSD rom
To backup a rom, click [Backup rom] then click a rom that you wish to backup.
The app will create sdcard/RomBackups/toEXT4/rom_name/rom_name.ext4.tar
and sdcard/romBackups/toSD/rom_name.ext4.tar files.
These are your backup that you can save them anywhere before you do any tests.
To restore a backed up rom, click [Backup rom] then click [Restore].
You will see that the app is switched in [RESTORE MODE].
In [RESTORE MODE] click a rom that you see in the list.
(Note that you must NOT change anything in sdcard/RomBackups folder.
If you changed anything from there then you must put the files and folders as they were,
before you enter again in the app and restore or backup any rom.)
PLEASE READ THIS :
You must NOT touch the app while backup or restore operations.
It will be unresponsive during the operations
(You can use a debugger to see what is the app compressing or decompressing).
Enjoy the app and please hit the thanks button (yes, it's still free!)
----------------------------------------------------------------------------------------------------------------------------------------
Version 9 :
Changed : no need the rom_name.txt method anymore. (requested by Tytung)
Added : Thanks to the guidance from securecrt now the app is getting the name through linux shell command.
Changed : colored text to [Switch rom] section. Blue color means the current running rom.
Added: Tabs in switch and delete sections for bigger buttons and more beautiful interface.
Changed : improved performance of the app (I hope it's ok now Szczepanik )
----------------------------------------------------------------------------------------------------------------------------------------
Version 8 :
Fixed : [Delete rom] section that was messed up from a bug that I found and now it is ok.
Added : colored text to [Switch rom] section. Cyan color means the current running rom(or the latest clicked rom).
Added : rom name in the [Tools] section so you will know in which rom the changes will be applied.
----------------------------------------------------------------------------------------------------------------------------------------
Version 7 :
App supports switching and deleting up to 18 nativeSD roms.
App will read from /proc/self/mountinfo the rom name and compare it with the rom_name.txt
that is automatically created in sdcard/nativeSD folder.
If the name matches, then it will enable the [Delete] and [Tools] buttons.
If not it will hide those 2 buttons to avoid any mistakes.
Also some small bugs have been fixed from previous versions.
----------------------------------------------------------------------------------------------------------------------------------------
Version 6 :
Added : fix permissions in nativeSD roms
Added : clear Dalvik cache in nativeSD roms
Added : kernel update(*) for nativeSD ONLY roms (thank you master Tytung for the guidance)
(*) How to update kernel :
1) Download the zip file of the kernel (tytung 3.5 and securecrt 24Sep2012 kernels work perfect)
2) Rename it to [update.zip] and put it in the sdcard/nativeSD folder
3) Run the nativeSDmultiboot app and click [Switch] -> click your current running rom -> [Back] -> [Tools] -> [Update kernel]
4) Reboot IMMEDIATELY! (this is really important to avoid any force closes...)
----------------------------------------------------------------------------------------------------------------------------------------
Version 5 :
Now CLK users can use this app to switch roms! (You must put [mkbootimg.sh] and [mkbootimg]
from [flash_sboot_v2.zip] inside the folder sdcard/nativeSD/)
The interface has been changed also.
----------------------------------------------------------------------------------------------------------------------------------------
Version 4 :
On first enter please click on the rom that you are running now! THIS IS VERY IMPORTANT!
It will create a rom_name.txt inside the nativeSD folder with the name that you are running (thanks for idea securecrt).
I have also added the delete function with confirmation message (requested by Xylograph).
It will hide the rom that you are currently running to avoid any mistakes (requested by securecrt).
P.S. All fellows developers are free to include it in your nativeSD roms.58Hello all,
Please download version 10 with latest updates.
Here is the link :
http://xdaforums.com/showpost.php?p=33815218&postcount=1392
