Oh sounds fun am going to use it as my personal kernel because I know if I include it in my kangs people will start crying and all that ever if I put a warning in the OP
Thanks for your work ^_^
Hmmm how far back did you last compile CM10?
[Guide] Compile your own nightly builds - AOKP, CM10, CM9, CNA, Slim Bean, P.A.C
- Thread starter Kayant
- Start date
- Status
Oh sounds fun am going to use it as my personal kernel because I know if I include it in my kangs people will start crying and all that ever if I put a warning in the OP
Thanks for your work ^_^
Hmmm how far back did you last compile CM10?
I see you have include many tweaks in your kernel it's great to see a kernel dev on the defy
I would like to test your kernel if that's ok with you just wanted to know if it's usable or if your still working on it.
Ok the reason why everyone is having problems building is to do with the linaro patches and build optimizations. Building using the toolchain for the kernel is fine but for compiling the it seems to bring issues so the only way to build is the revert these commits after you have synced up.
I will write up something in a bit on how to do so.
Great, looking forward to it
Yep don't know at the moment to solve that problem, but it's ok for me
I did my last build an the 18. but i will repo sync and try it again.
Ok plz tell me how that goes as quarx reverted the use of the linaro toolchain 2 days ago and I want to see if you get the same errors everyone seems to be getting.
OK people try this
1. repo sync for the latest changes
2. cd into the build folder in your working directory.
3. cd into the build folder
4. $ git log
5. now look for the commit that says compiler options copy the some of the numbers after the commit. For example commit 916d756c3086e58b9d3d2cb183572229ba32d80d. I would copy 916d756.
6. git revert <number>. So for me I would git revert 916d756.
7. Don't apply the linaro script and try building again
If you get any errors report back as there is one more place we need to revert changes.
1. repo sync for the latest changes
2. cd into the build folder in your working directory.
3. cd into the build folder
4. $ git log
5. now look for the commit that says compiler options copy the some of the numbers after the commit. For example commit 916d756c3086e58b9d3d2cb183572229ba32d80d. I would copy 916d756.
6. git revert <number>. So for me I would git revert 916d756.
7. Don't apply the linaro script and try building again
If you get any errors report back as there is one more place we need to revert changes.
Ok so just to be clear. You think that quarx won't rename his mr1-staging branch but keeps on using it for the new CM? I'm asking because I'm planning on building Quarx' Cyanogen for 4.2 but I don't want to re-download everything just because he renamed the whole thing
Ok so just to be clear. You think that quarx won't rename his mr1-staging branch but keeps on using it for the new CM? I'm asking because I'm planning on building Quarx' Cyanogen for 4.2 but I don't want to re-download everything just because he renamed the whole thing
Well I don't know am just speculating but if you do want to build then repo init again but with mr1-staging instead of jellybean and build.
It will probably take some time to sync since it's a new update to 4.2.
Great to see it work
Will add it to the OP until quarx removes it.confirmed, worked like a charm but after next repo sync i needed to do it again. is there a way to permanently ignore that commit?
bunch of another issues:
- first boot right after flashing self-compiled build crashes. then it boots normally (does it happen to you?)
- repo sync command wont sync work tree, it just gets stuck after fetching projects 100%. to sync work tree i need to restart terminal and run "repo sync -l". any way to fix it?
thanks Kayant for your support and efforts.
bunch of another issues:
- first boot right after flashing self-compiled build crashes. then it boots normally (does it happen to you?)
- repo sync command wont sync work tree, it just gets stuck after fetching projects 100%. to sync work tree i need to restart terminal and run "repo sync -l". any way to fix it?
thanks Kayant for your support and efforts.
You can use git commit -a once you have reverted it.
About your other issues never had sure problems before.
Ok so just to be clear. You think that quarx won't rename his mr1-staging branch but keeps on using it for the new CM? I'm asking because I'm planning on building Quarx' Cyanogen for 4.2 but I don't want to re-download everything just because he renamed the whole thing
mr1-staging is the name cyanogenmod use. Check their g+ page for the plan
-- this is tapatalk sig
Pick the changes in one commit only
Kayant,
taking advantage of your tip I have one question:
If I would like to get one commit after the one I revert, there is a way to get it ?
Like pick only it.
Supposing I had reverted to 5 commits early, and then, knowed that someone "fix something" in three commit later.
There is a way to get the changes, without have to do by hand ?
Kayant,
taking advantage of your tip I have one question:
If I would like to get one commit after the one I revert, there is a way to get it ?
Like pick only it.
Supposing I had reverted to 5 commits early, and then, knowed that someone "fix something" in three commit later.
There is a way to get the changes, without have to do by hand ?
The command you need is git cherry-pick . So for example git cherry-pick 459305A. One thing to note is that you may need to resolve some conflicts....
Let's Go ^_^
Last edited:
Hey Kayant did you find a fix for compile error posted few pages back for PACMAN rom
and which version of Paranoidpref.apk is working a tried few but it didn't work :S
and which version of Paranoidpref.apk is working a tried few but it didn't work :S
i get this:
after i do $ repo sync
Code:
curl: (22) The requested URL returned error: 404
Server does not provide clone.bundle; ignoring.after i do $ repo sync
If its downloading then don't worry about it.... Everyone gets this error as well
Also fix is not needed anymore quarx has officially reverted the commit in his repo
Let's Go ^_^
Last edited:
If its downloading then don't worry about it.... Everyone gets this error as well
Also fix is not needed anymore quarx has officially reverted the commit in his repo
Let's Go ^_^
yeah it s downloading, i am new too this and m doing a lot of research by reading your post, now one more doubt i try to port euroskank jellybro for myself from maguro by fitsnugly, not getting what all to replace?
btw your guide helped me a lot, big thanks KAYANT
(* | *)
yeah it s downloading, i am new too this and m doing a lot of research by reading your post, now one more doubt i try to port euroskank jellybro for myself from maguro by fitsnugly, not getting what all to replace?
btw your guide helped me a lot, big thanks KAYANT
(* | *)
You don't need to port anything. The Euroshank team cherry-pick patches that have not yet been merged due to being reviewed into the the main working branch. Basically Gerrit is a review centre where new patches are reviewed before being merged in euroshank team cherry-pick some of those patches that they want. So really you can do that yourself.
All you need to do is go the CM's gerrit website look for the patch you want and cherry-pick it there will be an option for it on the patch review page. To apply the patch you need to first cd into the directory that the patch relates to. For instance the patch is for frameworks/base so you cd into frameworks/base then copy the cherry-pick command from the patch review page. The you compile your new build. One thing to note is that anytime you repo sync the cherry-picks disappear.
- Status
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
68Disclaimer - About 4Gb+ to download the source for ICS & 10GB+ are so for JB
You will need 25GB (or more) free to complete a single build, and up to 80GB (or more) for a full set of builds.
To compile android you will need an linux distro preferably an Ubuntu-based distributions such as Ubuntu, Linux Mint however, you can use almost any Linux environment as long as you have the right packages and configurations. In this tutorial I will be showing how to use two Linux distributions Arch-Linux and any Ubuntu-based distribution.
To build android you will need a 64bit OS.
For Ubuntu you need either 10.04LTS or 11.10,12.04 futher version may require some more changes so please research this for find out
For Arch you just need the packages below because Arch is awesome like that
Common Setup
1)SDK
May not be needed - [Untested] Please report if it works for you
- Download the SDK here: http://developer.android.com/sdk/index.html
- Extract the SDK and place it in your home directory.
- I renamed my SDK to android-sdk to make it easier to navigate to.
- Go to your home folder, press Ctrl+H to show hidden files, and open up your .bashrc file.
- Add these lines at the bottom of the file:
Code:
# Android tools export PATH=${PATH}:~/android-sdk/tools export PATH=${PATH}:~/android-sdk/platform-tools export PATH=${PATH}:~/bin - Find your .profile file and add this at the bottom of the file:
Code:
PATH="$HOME/android-sdk/tools:$HOME/android-sdk/platform-tools:$PATH" - You have now successfully installed the Android SDK.
- To check for updates issue this into your terminal:
Code:
$ android
2) ADB Ubuntu
Note : Also for Arch if android sdk was downloaded
Configure your USB.Inside of this blank text file insert:Code:$ sudo gedit /etc/udev/rules.d/51-android.rules3) Save the file and close it and then issue this command:Code:#Acer SUBSYSTEM=="usb", ATTR{idVendor}=="0502", MODE="0666" #ASUS SUBSYSTEM=="usb", ATTR{idVendor}=="0b05", MODE="0666" #Dell SUBSYSTEM=="usb", ATTR{idVendor}=="413c", MODE="0666" #Foxconn SUBSYSTEM=="usb", ATTR{idVendor}=="0489", MODE="0666" #Garmin-Asus SUBSYSTEM=="usb", ATTR{idVendor}=="091E", MODE="0666" #Google SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", MODE="0666" #HTC SUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666" #Huawei SUBSYSTEM=="usb", ATTR{idVendor}=="12d1", MODE="0666" #K-Touch SUBSYSTEM=="usb", ATTR{idVendor}=="24e3", MODE="0666" #KT Tech SUBSYSTEM=="usb", ATTR{idVendor}=="2116", MODE="0666" #Kyocera SUBSYSTEM=="usb", ATTR{idVendor}=="0482", MODE="0666" #Lenevo SUBSYSTEM=="usb", ATTR{idVendor}=="17EF", MODE="0666" #LG SUBSYSTEM=="usb", ATTR{idVendor}=="1004", MODE="0666" #Motorola SUBSYSTEM=="usb", ATTR{idVendor}=="22b8", MODE="0666" #NEC SUBSYSTEM=="usb", ATTR{idVendor}=="0409", MODE="0666" #Nook SUBSYSTEM=="usb", ATTR{idVendor}=="2080", MODE="0666" #Nvidia SUBSYSTEM=="usb", ATTR{idVendor}=="0955", MODE="0666" #OTGV SUBSYSTEM=="usb", ATTR{idVendor}=="2257", MODE="0666" #Pantech SUBSYSTEM=="usb", ATTR{idVendor}=="10A9", MODE="0666" #Philips SUBSYSTEM=="usb", ATTR{idVendor}=="0471", MODE="0666" #PMC-Sierra SUBSYSTEM=="usb", ATTR{idVendor}=="04da", MODE="0666" #Qualcomm SUBSYSTEM=="usb", ATTR{idVendor}=="05c6", MODE="0666" #SK Telesys SUBSYSTEM=="usb", ATTR{idVendor}=="1f53", MODE="0666" #Samsung SUBSYSTEM=="usb", ATTR{idVendor}=="04e8", MODE="0666" #Sharp SUBSYSTEM=="usb", ATTR{idVendor}=="04dd", MODE="0666" #Sony Ericsson SUBSYSTEM=="usb", ATTR{idVendor}=="0fce", MODE="0666" #Toshiba SUBSYSTEM=="usb", ATTR{idVendor}=="0930", MODE="0666" #ZTE SUBSYSTEM=="usb", ATTR{idVendor}=="19D2", MODE="0666"
Code:$ sudo chmod a+r /etc/udev/rules.d/51-android.rules
ADB Arch if android-sdk hasn't been installed
Code:[FONT=Trebuchet MS][SIZE=4]$ sudo yaourt -S android-tools [/SIZE][/FONT]
4) Install the repo:
Code:$ mkdir ~/bin $ PATH=~/bin:$PATH $ curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo $ chmod a+x ~/bin/repo $ Reboot your pc.
5) Packages Arch
Pacman
Code:$ sudo pacman -S perl git gnupg flex bison gperf zip unzip lzop sdl wxgtk \ quashfs-tools ncurses libpng zlib libusb libusb-compat readline schedtool \ optipng python2 perl-switch lib32-zlib lib32-ncurses lib32-readline \ gcc-libs-multilib gcc-multilib lib32-gcc-libs binutils-multilib libtool-multilib [/SIZE][/FONT]
Yaourt
Packages Ubuntu 10.04 - 11.10Code:[FONT=Trebuchet MS][SIZE=4]$ sudo yaourt -S [/SIZE][/FONT][FONT=Trebuchet MS][SIZE=4]pngcrush sun-java6[/SIZE][/FONT]
Code:[FONT=Trebuchet MS]$ sudo apt[/FONT][FONT=Trebuchet MS]-get install git-core gnupg flex bison gperf build-essential \ zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs \ x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev \ libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown \[/FONT][FONT=Trebuchet MS] libxml2-utils xsltproc schedtool pngcrush[/FONT]
Packages Ubuntu 12.04 - 13.04
Code:$ sudo apt-get install git gnupg flex bison gperf build-essential \ zip bzr curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \ libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \ libgl1-mesa-dev g++-multilib mingw32 tofrodos \ python-markdown libxml2-utils xsltproc zlib1g-dev:i386 schedtool pngcrush
Sun Java 6
Additional changes neededCode:[FONT=Trebuchet MS][SIZE=4]$ sudo apt-get purge openjdk* $ sudo add-apt-repository ppa:webupd8team/java $ sudo apt-get update $ sudo apt-get install oracle-java6-installer[/SIZE][/FONT]
On Ubuntu 10.10:
$ sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
On Ubuntu 11.10:
$ sudo apt-get install libx11-dev:i386
On Ubuntu 12.04/13.04:
$ sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
6) Download the source
$ mkdir cm(name it whatever you want)
$ cd into the the directory you just created so for me $ cd cm
For CM10
$ repo init -u git://github.com/Quarx2k/android.git -b jellybean
For CM9
$ repo init -u git://github.com/Quarx2k/android.git -b ics
or
$ repo init -u git://github.com/tpruvot/android.git -b ics
For AOKP JB (Black screen bug unsupported do not build!!)
$ repo init -u git://github.com:Kayant/platform_manifest.git -b jb
For AOKP ICS
$ repo init -u git://github.com:Kayant/platform_manifest.git -b ics
For Slim Bean
$ repo init -u git://github.com/Kayant/platform_manifest.git -b SLIM
For CNA
$ repo init -u git://github.com/Kayant/android_manifest.git -b jellybean
For P.A.C
$ repo init -u git://github.com/Kayant/PAC_android.git -b jellybean
Now
$ repo sync
or
If you have a good connection try this
$ repo sync -j16
If it breaks reduce the number or just
$ repo sync
if you still cant just repo sync
$ repo sync -f
Again if you're still getting errors - A tip from my good friend Pottkopp just leave the pc to sync stop watching those videos, chatting, etc u get the idea because this needs a lot of bandwidth .....
Takes about 2 hours or more for me to sync
7) Ccache
You can optionally tell the build to use the ccache compilation tool. Ccache acts as a compiler cache that can be used to speed-up rebuilds. This works very well if you do "make clean" often, or if you frequently switch between different build products.
Put the following in your .bashrc or equivalent.
export USE_CCACHE=1
By default the cache will be stored in ~/.ccache. If your home directory is on NFS or some other non-local filesystem, you will want to specify the directory in your .bashrc as well.
export CCACHE_DIR=<path-to-your-cache-directory>
The suggested cache size is 50-100GB. You will need to run the following command once you have downloaded the source code:
prebuilts/misc/linux-x86/ccache/ccache -M 50G
When building Ice Cream Sandwich (4.0.x) or older, ccache is in a different location:
prebuilt/linux-x86/ccache/ccache -M 50G
This setting is stored in the CCACHE_DIR and is persistent.
8) Building
All Jellybean roms now use mb526 build for Defy&Defy + thanks to the unified custom kernel
Cyanogenmod -
First you need to download the some stuff or CM won't build -
$ ./vendor/cm/get-prebuilts
If you are getting errors then read this post - here Thanks Skeevy.
Jellybean
$ source build/envsetup.sh && brunch mb526
ICS
$ source build/envsetup.sh && brunch jordan (for defy)
$ source build/envsetup.sh && brunch jordan_plus (for red lense including Defy+)
AOKP JB/ICS -
$ source build/envsetup.sh && lunch
choose aokp_mb526
Slim Bean -
$ source build/envsetup.sh && lunch
choose slim_mb526
CNA -
$ source build/envsetup.sh && lunch
choose cna_mb526
P.A.C
$ ./build-pac.sh mb526 true
Now to Build if the lunch command has been used-
Replace bacon with squish if building CNA
make -j# bacon(# represents double the cores you have on your computer)
So i have two cores so i do make -j4 bacon or you can use mka bacon and the
computer will choose the best one for you
After some hours or minutes if you have a beast of a computer your build should be complete... Well done ^_^
Use the signed zip to update the defy in recovery, don't use the ota package !
File is will be located in ~/out/target/product/mb526
E.g for defy aokp it will be out/target/product/mb526/then aokp_mb526-date.zip.
P.s if you get any errors search this thread first and google then post if you can't find your answer.
Credit and Thanks
Walter79 for his guide and help
Quarx2k, Epsylon3 Maniac103 and the many other moto devs for their work on the motorola devices
Dastin1015 for his guide as am using some of his instructions in this tutorial
Credit and thanks to Google for the guide I used the Ccache setup section from source.andriod.com3Ok so just to be clear. You think that quarx won't rename his mr1-staging branch but keeps on using it for the new CM? I'm asking because I'm planning on building Quarx' Cyanogen for 4.2 but I don't want to re-download everything just because he renamed the whole thing
Well I don't know am just speculating but if you do want to build then repo init again but with mr1-staging instead of jellybean and build.
It will probably take some time to sync since it's a new update to 4.2.
Great to see it work Will add it to the OP until quarx removes it.3OK people try this
1. repo sync for the latest changes
2. cd into the build folder in your working directory.
3. cd into the build folder
4. $ git log
5. now look for the commit that says compiler options copy the some of the numbers after the commit. For example commit 916d756c3086e58b9d3d2cb183572229ba32d80d. I would copy 916d756.
6. git revert <number>. So for me I would git revert 916d756.
7. Don't apply the linaro script and try building again
If you get any errors report back as there is one more place we need to revert changes.3
delete external/hostpad
Delete softAP.
Both softAP and hostpad is not ready for JB yet.
best of luck in compiling now.3Made a private group here @ http://xdaforums.com/group.php?groupid=797
Sent invites to the following
aleeyt
brajesh.sharma87
Epsylon3
josuearisty
Kayant
m11kkaa
maniac103
Quarx
TweetyPeety
walter79
I'm sure I missed someone so let me know and I'll send out more invites.
New posts
-
-
How to install and use whatsapp in gree mobile phone
- Latest: FM WhatsApp
