Remove All Ads from XDA
Honor 9 Lite

HTC HD 2 is not booting fully

19 posts
Thanks Meter: 1
By DOVIZ, Junior Member on 12th November 2012, 07:13 PM
Post Reply Email Thread
Hey all, i got one problem, i disassembled my htc hd 2 to desolder the old digitizer and to solder the new one, so i soldered, at first time it was not working, second time soldering - not working, that until i resoldered it 6 times, still, not working, so i soldered the old one ( broken one) tryed to turn up the phone - all normal, it turned, O2 logo showed, then waiting for a booting android-

Load done!
Go! go! go! ........... AND nothing happens ( with the new digitizer it booted good, fully, after the old one soldering back to the place - it is not booting, just till this go go go).
So what could be the problem? Please guys help me to find out whats wrong because it is getting me nervous...
8th December 2012, 11:19 AM |#2  
Senior Member
Thanks Meter: 26
If you can't help him, why do you even bother posting in his thread? Just to make posts?

Why do you solder so many times? The phone may be damaged now, because of your soldering, which may be done worse. If you're lucky, you can clean the parts and solder again, but I wouldn't do that. Try to flash WinMo and try to boot it. If it doesn't work, take the phone to somebody who can help you.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes