Straight Talk SGS2- SGH-S959G

Search This thread
By:
Advanced…
IndigoAK

IndigoAK

Senior Member
Oct 17, 2012
153
53
jpapa1086 said:
lmao!!!! im sorry im not laughing at you but "traffic pumping" ... whats next???? call another rep and get this fixed and do not hang up the phone!!!!!
Click to expand...
Click to collapse

They do shady stuff like this all the time. A friend's husband had his account canceled because his phone would pocket dial and they said the short calls were consistent with those of a drug dealer.
 
M

mr-cook

Senior Member
Nov 4, 2012
987
2,046
EzSqueezeCheese said:
Screen on my battery drains 10% every 20 mins. Idk if I like that.

Battery power and stability are what I look for most in a ROM. You guys got any suggestions?
Click to expand...
Click to collapse

Wow. I'm getting close to an hour screen time for 10% battery. With SHOstock3 2.1 and aj's kernel. I switched to aj's kernel because ss2.1 was so bad on battery compared to 1.8 and earlier. Try switching kernels.

Yes razen_kain the kernel is what affects battery, and performance.

Sent from my SGH-S959G
 
  • Like
Reactions: razen_kain
EzSqueezeCheese

EzSqueezeCheese

Senior Member
Jan 23, 2013
497
128
mr-cook said:
Wow. I'm getting close to an hour screen time for 10% battery. With SHOstock3 2.1 and aj's kernel. I switched to aj's kernel because ss2.1 was so bad on battery compared to 1.8 and earlier. Try switching kernels.

Yes razen_kain the kernel is what affects battery, and performance.

Sent from my SGH-S959G
Click to expand...
Click to collapse

I have no clue how to switch kernels. Or where to find it.
 
Spinergy02

Spinergy02

Senior Member
Dec 29, 2012
303
76
EzSqueezeCheese said:
I have no clue how to switch kernels. Or where to find it.
Click to expand...
Click to collapse

The siyah kernel has evolved into AJK. Search the threads for AJK i777. The current version is 1.3 at the moment. They install easily in recovery just like you flash a rom. Just make sure that you already have Philz custom recovery, otherwise the ajk kernel won't work. Also read the installation instructions carefully. You have to clear cache and dalvik, flash the kernel, reboot recovery, then reset stweaks.

Sent from my SGH-S959G
SHOstock3 v2.5.1 w/ Siyah kernel
 
M

mr-cook

Senior Member
Nov 4, 2012
987
2,046
mr-cook said:
WHAT?

Are you just spamming this thread? Please don't post off the wall opinions here that just confuse others.

Sent from my SGH-S959G
Click to expand...
Click to collapse

^ Self quote from 01/18/2013 to va540area


Now for this one-
va540area said:
Straight Talk disabled my GS2 for doing something called "traffic pumping" and are saying i need to buy a new phone.. i had no clue what that was until i looked it up.. anyway i bought a new GS2 and when i put the sim card into my old GS2 from the new one it works... now im thinking this is my chance to try and root the new GS2 that way if i mess up i can just return it to walmart and get another one, this will be my frist time rooting and its real complicated for somebody that has never done it before but im take that chance, i need somebody from here thats willing to walk me step by step via instant messenger or i guess we can do it threw here, anybody willing to do that? i know the basic steps

-Download Odin and unzip wherever you prefer on your computer.
-Download the Root zip, and place on the root of your Ext.SD.
-Download CWM V6.0.2.7 Odin flash, and install it using Odin with the provided instructions.
-Boot into CWM make a backup.
-Flash the root zip in CWM.

but wanna make sure i do everything rite. like for expample, it saids place the root zip on ext SD card, but do i take the sd card out my phone and place it into the sd slot, or do i do it via cable?

and it says boot into cwm and make a backup, but how do you make a backup?

then it says flash the root zip in cwm
Click to expand...
Click to collapse

WHAT?

Are you just spamming this thread? Please don't post off the wall opinions here that just confuse others.

As you can see at the top of this post we have been done down this road before. Please do not post crazy things here. We have tried to help you before, why do this again? All answers can be found in this thread. If you're not willing to put any effort in to reading, I'm not willing to help!

Traffic pumping? REALLY?

Sent from my SGH-S959G
 
Last edited:
R

RoCKOwNz

Senior Member
Jan 30, 2013
179
64
EzSqueezeCheese said:
Screen on my battery drains 10% every 20 mins. Idk if I like that.

Battery power and stability are what I look for most in a ROM. You guys got any suggestions?
Click to expand...
Click to collapse

I haven't switched my kernel just yet thinking about giving that AJ 1 a shot just to help some more with battery life looks like mr cook is having good luck with it but I use a few apps to help with battery also CPU sleeper kills 1 of the cpu cores when the screen is off and boosted my battery life alot with just that android assistant I use for alot of things but it has a decent task killer in it also that I use to get rid of running apps without me having to worry about it and I dont know if you mess with it in the dark much but I do and its bright on the eyes even all the way down so night mode allows you to take the brightness down even further which also helps did find a problem with that night mode app though if you try to install an app you cant click the install button while its running for some reason but other than that its good.
 
Spinergy02

Spinergy02

Senior Member
Dec 29, 2012
303
76
RoCKOwNz said:
I haven't switched my kernel just yet thinking about giving that AJ 1 a shot just to help some more with battery life looks like mr cook is having good luck with it but I use a few apps to help with battery also CPU sleeper kills 1 of the cpu cores when the screen is off and boosted my battery life alot with just that android assistant I use for alot of things but it has a decent task killer in it also that I use to get rid of running apps without me having to worry about it and I dont know if you mess with it in the dark much but I do and its bright on the eyes even all the way down so night mode allows you to take the brightness down even further which also helps did find a problem with that night mode app though if you try to install an app you cant click the install button while its running for some reason but other than that its good.
Click to expand...
Click to collapse

AJK has several different governors to control cpu usage. It also has an option to modify screen auto brightness to work more like it should (a bit dimmer than stock). I'd suggest ruining it without those extra apps you are using and hop through a few power cycles just to see how it works for you. I've been using the rav4kar profile with a few small changes and my battery life and phone performance it's so much better.

Sent from my SGH-S959G
SHOstock3 v2.5.1 w/ Siyah kernel
 
razen_kain

razen_kain

Senior Member
Jan 28, 2013
2,563
2,484
Carthage
Just thought id add my two cents in here. I have tried the different profiles in stweaks and i have not been able to beat the default settings with the hyper (awake) gov and conservative (asleep) gov. Performance is great though it does use a little more battrry. Small price to pay for zero lag and jitters no mattet what i do.
I did set OC to 1400 mhz but it really is not necessary
 
roughmouth

roughmouth

Senior Member
Nov 27, 2012
172
32
Echo. Callers voice echoing back to themselves

so i did a few tests with different radios (modems) located at http://xdaforums.com/showthread.php?t=1361393 and i have found that i777 UCLE5 Modem_CWM is the best so far for reducing noise the echo the caller gets back to themselves. its not gone, but this is the closest thing to a remedy i have found so far.
 
You must log in or register to reply here.

Similar threads

E
[Firmware][SGH-I777][JB][4.1.1] CyanogenMod 10 preview | USER THREAD
Replies
4K
Views
780K
S
sam3000
SeanHacker
  • Locked
[Rom] AOKP(Jellybean 4.2.2) | Task650 (6.24.13) AT&T
Replies
29K
Views
4M
SeanHacker
SeanHacker
atinm
[ROM][SGH-I777][4.0.4] CyanogenMod 9 nightly builds | DISCUSSION THREAD
Replies
4K
Views
676K
Lekerstein
Lekerstein
shoman94
[RoM][XWLPY-4.0.4-ICS]SHOstock2 v6.2 [11/13/2012](FINAL)
Replies
10K
Views
1M
V
Vintage144
jivy26
[How To] Easily Root your SGS2
Replies
833
Views
356K
supertech555
supertech555

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 85
    M
    mr-cook
    I NOR ANYONE ELSE BUT YOURSELF IS RESPONSIBLE FOR ANY DAMAGES, LOSS, OR ANYTHING ELSE THAT MAY RESULTS FROM FOLLOWING THE INSTRUCTIONS, OR USING ANYTHING FOUND ON THIS PAGE ----USE AT YOUR OWN RISK----


    CONSIDER THIS THE ONLY VALID POST IN THIS THREAD- EVERYTHING AFTER THIS POST COULD BE INCORRECT
    ALL DANGEROUS LINKS HAVE BEEN REMOVED. IF I MISSED ANYTHING, AND A LINK TAKES YOU TO DEV-HOST- PLEASE CLOSE THE PAGE IMMEDIATELY, NONE OF THE LINK ON THAT SITE ARE SAFE!!!! If you're looking for one of the missing files try asking in the thread someone may still have them.
    If your using the information on this page please remember to HIT THE THANKS BUTTON.

    THIS IS ONLY FOR THE STRAIGHT TALK S2 MODEL# SGH-S959G...... NOT COMPATIBLE WITH ANY OTHER PHONE.

    THE BEST WAY TO ROOT / OR FLASH A CUSTOM ROM -
    Install RECOVERY using ODIN, make a BACKUP, then flash the ROOT ZIP in RECOVERY.
    - TWRP 2.7.1.0 Odin-
    - Make a backup with TWRP before going any further. Boot into recovery, select backup/ restore, backup.
    - Root Zip- flash zip through CWM thanks to cynnar-
    Mirror-
    -You will need to install busybox from the market if staying on stock+ root.
    - PhilZ CWM v6.0.2.7 If you will be using a Siyah based kernel ( AJK Kernel ), or would like the extra options in CWM flash this- View attachment 1703135

    If you prefer CWM flashable zips can be found further down, and throughout the thread (search).


    - ROMs
    - I777 Main Thread- http://xdaforums.com/forumdisplay.php?f=1301 (Android Development, and Ported Development to find ROMs)
    - OR flash CyanogenMod 10.1 from link below (this is flashed in CWM) From CyanogenMod 10.1 all i777 custom ROMs are compatible.
    - CyanogenMod, and most all custom ROMs are already rooted when you flash them, no need to root first.
    - You may need to change your APN for data to work with some custom ROMs. Stock APN is at the bottom of this post. Usually you can just edit the included APN from att.mvno to wap.tracfone , and save it, then select it. If data still doesn't work delete all other APNs besides the one you're using.


    - ODIN INSTRUCTIONS -
    - Samsung drivers must be installed on your computer- Samsung Drivers- http://www.samsung.com/us/support/owners/product/SGH-S959ZKATFN
    - Download Odin 1.85- View attachment Odin3-v1.85.7z and unzip.
    - Enable USB Debugging in Settings menu of phone.
    - Put your phone in Download Mode - -Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted.
    - Open Odin folder, Click Odin3 v1.85.exe, With your phone connected the box under ID:COM should be yellow (if it's not you missed a step earlier), Click PDA, Select the file you downloaded earlier, DO NOT TOUCH ANYTHING ELSE- MAKE SURE AUTO REBOOT AND F. RESET TIME ARE THE ----ONLY----- THINGS CHECKED----- AND RE-PARTITION AND FLASH LOCK ARE ----NOT---- CHECKED....., Press Start (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen). You should get a green PASS message in the top box.


    - CWM ZIP FLASHING -
    - Save Zip file to be flashed to the Root (not in a folder) of your External SD card
    - BOOT INTO RECOVERY- Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Select -install zip from sdcard, -choose zip from sdcard, -select the zip file you put there earlier, -it will ask you to confirm, select -yes -install
    - If you are installing a custom ROM Do this FIRST before installing Zip, -wipe data/factory reset, wipe cache partition, select -advanced, -wipe dalvik cache


    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    FACTORY FIRMWARE (IN CASE OF SOFT-BRICK)
    Before returning to Stock remember to format your preload partition. This can be achevied with my ROM wipe script found here- http://xdaforums.com/showthread.php?p=38199542

    ---CREDIT--- eclipsedarkmoon
    This will only work with Heimdall-
    - Download Heimdall 1.3.1-
    Heimdall Suite 1.3.1 Windows https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.1-win32.zip
    Heimdall Suite 1.3.1 OS X 10.4+ https://github.com/downloads/Benjamin-Dobell/Heimdall/heimdall-suite-1.3.1-mac.dmg

    - Download Factory Firmware -

    - Mirror-

    - Open Heimdall, click Drivers, zadig.exe
    - Put phone in Download Mode--Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
    - zadig.exe menu, List all devices, Choose Samsung USB composite device (or similar) from list, Press Install Drivers (if you receive a message about being unable to verify the publisher of the driver click "Install this driver software anyway". Your computer may also need to restart for this).
    - Now open heimdall-frontend.exe, on the Load Package (main page) select Browse from Heimdall firmware package, Select the Factory Firmware you downloaded earlier (it will take a minute while Heimdall extracts it), Once extracted press Load / Customise in the bottom right corner (this takes you to the Flash page),--- Select FACTORYFS in the box on the right labeled Partitions(Files), DO NOT TOUCH ANYTHING ELSE- MAKE SURE REPARTITION AND NO REBOOT ARE---- NOT----- CHECKED.... Press Start in the bottom right corner. (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen).
    - Hopefully it has been brought back from the Dead.

    - Odin flashable Factory Firmware -thanks to root4rd3d-
    Uncompressed version-
    - Put your phone in Download Mode --Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted
    - Open Odin folder, Click Odin3 v1.85.exe, With your phone connected the box under ID:COM should be yellow (if it's not you missed a step earlier), Click PDA, Select the file you downloaded earlier, DO NOT TOUCH ANYTHING ELSE- MAKE SURE AUTO REBOOT AND F. RESET TIME ARE THE ----ONLY----- THINGS CHECKED----- AND RE-PARTITION AND FLASH LOCK ARE ----NOT---- CHECKED....., Press Start (It will take a few minutes to load everything do not touch your computer or the phone during any of this, after the phone re-boots it may take a few minutes to load back up leave it alone until it has fully started up and at the home screen). You should get a green PASS message in the top box.

    - STOCK ROM CWM FLASH -thanks to mr-cook
    (this is will not change your recovery or modem)
    - Download-
    - Place on the root of your Ext.SD
    - Boot into CWM recovery (if you can't do this start at the top of the page!)
    - Factory reset * Wipe cache * Wipe dalvik cache
    - Install zip from sdcard, choose zip from sdcard, select zip you downloaded earlier, confirm install
    - Reboot
    - STOCK MODEM- View attachment S959GUDLG1_modem.zip
    - STOCK 3e RECOVERY Not sure why you would want it, but just in case- removed (YOU MUST FLASH THIS LAST TO RETURN TO STOCK)-


    - IF YOU GET BOOT-LOOP- Boot into recovery
    - Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Factory reset, wipe cache
    - Reboot

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    ROOT ZIP-
    Flash through CWM thanks to cynnar- View attachment SGH-S959G_Root.zip

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    SGH-S959G - CyanogenMod

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    MODEMS
    (Install with CWM)
    -I777UCMD8- This is the Newest Available

    - Stock- S959GUDLG1 thanks to mr-cook- View attachment S959GUDLG1_modem.zip

    - I777UCLL6- ATT UCLL6 thanks to mr-cook- View attachment I777UCLL6_modem.zip

    - I777UCLK3- ATT UCLK3 thanks to mr-cook- View attachment I777UCLK3_modem.zip

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    REMOVING THE YELLOW TRIANGLE

    GINGERBREAD ONLY! (Root Required)
    - Extract the stock zImage from the factory firmware at the top of this page (I used 7zip, and needed to extract it twice to get it apart).
    - Put the stock zImage on the root (not in a folder) of your internal SD card. You can do this through the usb, adb push (adb push- Copy and paste the zImage into your folder with adb, connect your phone with usb, then command- adb push zImage /sdcard/zImage), whatever method you like.
    - Now using adb shell, or terminal emulator found in the market (if you don't' have adb ask GOOGLE) issue the command (capitilazation and spacing matter):

    $ adb shell
    $ su
    # dd if=/sdcard/zImage of=/dev/block/mmcblk0p5

    This must be done as #, if you have a $ enter command: su
    You must already be rooted for this to work. To switch to a different kernel afterwards you can use the same method, or CWM without getting the yellow triangle again or increasing the flash counter. As long as you flash internally, if you use Odin or Heimdall to flash anything thats not stock it will come back.


    REMOVING YELLOW TRIANGLE ICS AND ABOVE!
    -If running ICS or above you can use triangle away found here- http://xdaforums.com/showthread.php?p=22462960

    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------


    CWM
    Flash these from CWM

    CWM RECOVERY v6.0.2.7 (ODIN flash) Thanks to r00t4rd3d-

    - PhilZ CWM v6.0.2.7 built by AJ Newkirk- (Thanks to mr-cook)- View attachment 1703135 (This is compatible with AJ Newkirks Siyah kernel and jeboo's new features in SHOstock3)
    - Phil's CWM v6.0.2.7 built by AJ Newkirk- (Thanks to mr-cook)-this one gets rid of the blue progress bar on the s2 boot screen, that's the only difference.

    - CWM v6.0.2.7- (Thanks to mr-cook)- View attachment 1703137

    -6.0.4.4 Odin-

    - CWM v6.0.4.4- (Thanks to mr-cook)- View attachment 2387202

    -6.0.4.5 Odin-

    -6.0.4.5 zip-


    -AJK CWM Odin-


    -TWRP 2.7.0.0 recovery "thanks to razen kain" (flash from recovery)-
    Let me know if this link gets killed and I'll add it to Dev host.

    Flashing other versions of CWM with adb (Root Required)
    - Extract the zImage (boot.img) from the ROM of your choice (I use 7zip to extract it).
    - Put the zImage (boot.img) on the root (not in a folder) of your internal SD card. You can do this through the usb, adb push (adb push- Copy and paste the zImage into your folder with adb, connect your phone with usb, then command- adb push zImage /sdcard/zImage), whatever method you like.
    - Now using adb shell (if you don't' have adb ask GOOGLE) issue the command (capitilazation and spacing matter):


    $ adb shell
    $ su
    # dd if=/sdcard/zImage of=/dev/block/mmcblk0p6

    or if it's a boot.img

    # dd if=/sdcard/boot.img of=/dev/block/mmcblk0p6



    -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    ADB (android debug bridge)

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    STOCK APN
    APN
    Name- Straight Talk
    APN- wap.tracfone
    Proxy- Not set
    Port- Not set
    User name- Not set
    Password- Not set
    Server- Not set
    MMSC- http://mmsc.cingular.com/
    MMS proxy- mms2.tracfone.com
    MMS port- 80
    MCC- 310
    MNC- 410
    Authentication type- Not set
    APN type- default,supl,mms


    BYOP sim card APN
    APN
    Name- Straight Talk
    APN- att.mvno
    Proxy- Not set
    Port- Not set
    User name- Not set
    Password- Not set
    Server- Not set
    MMSC- http://mmsc.cingular.com/
    MMS proxy- mms2.tracfone.com
    MMS port- 80
    MCC- 310
    MNC- 410
    Authentication type- Not set
    APN type- default,supl,mms

    New APN
    Name: Straight Talk
    Apn: tfdata
    MMSC: http://mms-tf.net
    Mms proxy : mms3.tracfone.com
    MMS PORT: 80
    MCC:310
    MNC:410
    APN TYPE: default,supl,mms



    SIM unlock threads
    - http://xdaforums.com/showthread.php?p=10456038

    - http://xdaforums.com/showthread.php?p=30541172

    If you don't have service after unlocking and switching SIM cards you need to flash an at&t modem like I777UCLL6 found above. Apparently the modem used by Straight Talk only works with their service.


    Being THROTTLED? read this-

    ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

    - I777 Main Thread-

    - Samsung Drivers-


    - BOOT INTO RECOVERY-
    Phone off- Hold volume up, volume down and power button until you reach Recovery menu.


    - DOWNLOAD MODE-
    Power off, Hold volume down button, Plug in USB connected to computer, Hit volume up when prompted


    - CWM ZIP FLASHING -
    - Save Zip file to be flashed to the Root (not in a folder) of your External SD card
    - BOOT INTO RECOVERY- Phone off
    - Hold volume up, volume down and power button. (You can release just the power button at the samsung screen but dont have to).
    - Select -install zip from sdcard, -choose zip from sdcard, -select the zip file you put there earlier, -it will ask you to confirm, select -yes -install
    - If you are installing a custom ROM Do this FIRST before installing Zip, -wipe data/factory reset, wipe cache partition, select -advanced, -wipe dalvik cache


    -Link to my CWM flashable Wipe Scripts-


    More to come.......

    THANKS
    None of this would be possible without
    - Entropy512
    - eclipsedarkmoon
    - r00t4rd3d
    - RenderBroken
    - and everyone else that has posted here, tested, questioned, etc...
    View
    13
    AJ Newkirk
    AJ Newkirk
    Off-Topic:

    I just wanted to take a minute to congratulate mr-cook on becoming an XDA Recognized Contributor! :good: :good:

    This guy gives so much to the SII community and it is great to see him be recognized for his efforts.

    Congrats!

    /Off-Topic
    View
    9
    M
    mr-cook
    razen_kain said:
    The op needs to be updated with this'd information...

    The latest cwm is only for kitkat ROMs, that's cm 11+. Of you want to go with jelly bean ROMs like the one you're trying to use, you need to use cwm 6.0.2.7 it's older but JB won't flash on the newer ones. There are a few different versions but any will work as long add it's philZ, AJK, or 6.0.2.7

    Since you already have cwm installed you can just DL the zips and flash them in recovery then reboot "recovery" and it will be complete. No need for Odin now. Try that and get back to us
    Click to expand...
    Click to collapse

    I think I'm just going to replace CWM with the new TWRP in the op. It seems to be easy more compatible. Plus I like it better.

    EDIT: Done. Op updated to install TWRP with Odin to be more compatible.

    Sent from my SGH-S959G
    View
    9
    razen_kain
    razen_kain
    mmystere68 said:
    since this post is in AT&T Samsung Galaxy S II SGH-I777 section...i thought it might be compatible. i even saw a lot of ROM posts where they says its compatible with i777 and sgh s959g....so i was in doubt and had to ask.....glad to know its not compatible...thx....
    Click to expand...
    Click to collapse







    Apprentice Adam said:
    I thought it was...a lot of the ROMs I search are based on the i777 builds just have to make sure you have the correct radio installed.....I've rooted mine and used several different ROMs just based off of this thread. Searching the thread with the search tool will yield massive results. See post#5 from the OP that's a fairly good clue.
    Click to expand...
    Click to collapse

    Ok ok ok wait... Let's clear up some confusion. The one and only difference between the 959g and the i777 is that the 959g has its recovery on a separate partition by itself, whereas the i777 has kernel and recovery on the same partition. The 959g can use any ROM or kernel built for the i777 no problem. But if you want a different recovery on 959g you must use one of the zips from the op or Odin. If you had an i777 and you flash a new kernel it will also install a new recovery as it will be packaged in the zip. If you flash the same kernel on the 959g, your kernel will change but recovery remains untouched since it is on a different partition. That is the one and only difference between the two. Happy flashing :thumbup::D
    View
    8
    M
    mr-cook
    CWM

    -6.0.4.5 Odin- SGH-S959G_CWM-v6.0.4.5.tar.md5 - 4.88 MB

    -6.0.4.5 zip- SGH-S959G CWM_v6.0.4.5.zip - 5.01 MB

    -6.0.4.4 Odin- SGH-S959G_CWM-v6.0.4.4.tar.md5 - 4.80 MB

    -6.0.4.4 zip- already in the OP

    -AJK CWM Odin- AJK-CWM.tar.md5 - 8.01 MB





    Sent from my SGH-S959G
    View

New posts