[Galaxy Note2 TOOLKIT V6 SPRINT] Drivers, Backup, Root, Recovery, Flash to Stock

Search This thread

ceabbott2

Senior Member
Jul 15, 2010
728
83
Henderson, KY
Im stuck in modified TWRP

I used billard412's Back to unrooted stock with auto flash count reset (FINAL LJC)

I wiped flashed file but it keeps booting into the modified TWRP RECOVERY? Stuck at this point.

Anyone have any ideas?

I was on TWRP 2.4.1 Newest version
MA5 Stock Deodexed MA5 Firmwares

OK Now a little freaked out. I can't get to billard412's file or any of my back ups because they were on my external sd card!!!! I hate trying to learn new stuff (old dog)
I'm so used to HTC and when I think I have a grasp of Sammy I F&ck it up!

I think the internal card is ok.

Oh yeah and my back ups on PC are gone because of hard drive crash! FFFFUUUUDDDDGGGGEEEE!!!!!!!

Any help to get me back to where I was before I flashed this thing would be very much appreciated. Hell I'll take a bootable ROM of any kind. Sweating bullets!

I have the mskips 3.0 toolkit can that help? I scared ****less to do anything!

Can i use the tool kit to get back to unrooted stock with a TWRP recovery? That's the main reason i was scared to use the tool kit because it only mentions an unrooting option with CWM.
 
Last edited:

dipapi19

Member
May 1, 2008
12
0
New England
Sprint Build JZO54K-AMA7

I made the stupid mistake of taking a software update not thinking it would change the firmware/build. I am now at JZO54K-AMA7. Would the last build for Sprint in the toolkit still work or should I wait until the toolkit officially supports the above? Thanks as well for the toolkit. Awesome to have a one-stop shop! :highfive:
 

simple man

Senior Member
Dec 25, 2010
761
260
Missouri
Re: [Galaxy Note2 TOOLKIT V3.0.0 SPRINT] Drivers, Backup, Root, CWM, TWRP, Flash to S

When flashing this file which is the only one that will take you back to stock ljc safely from lk8 and up.... You can't wipe dalvick cache or cache after the file or it'll put you back in recovery choose to reboot after it says complete then it'll reboot to the special recovery where it will flash the critical stuff. Then you'll be 100% stock ljc.

Sent from my SPH-L900 using Tapatalk 2
 
  • Like
Reactions: ceabbott2

ceabbott2

Senior Member
Jul 15, 2010
728
83
Henderson, KY
You talking to me? :)

When flashing this file which is the only one that will take you back to stock ljc safely from lk8 and up.... You can't wipe dalvick cache or cache after the file or it'll put you back in recovery choose to reboot after it says complete then it'll reboot to the special recovery where it will flash the critical stuff. Then you'll be 100% stock ljc.

Sent from my SPH-L900 using Tapatalk 2

Hey Simple Man,

Um were you talking to me or the other poster? If it was me how do I get this modified version of TWRP to see the external card? It won't let me choose it and my backups and the original billard412 file is there? If I can just somehow mount the external sd or push another vrsion of TWRP I could get it to flash any of my other files, even retry the billard412 file. Stuck!
 

simple man

Senior Member
Dec 25, 2010
761
260
Missouri
Re: [Galaxy Note2 TOOLKIT V3.0.0 SPRINT] Drivers, Backup, Root, CWM, TWRP, Flash to S

Hey Simple Man,

Um were you talking to me or the other poster? If it was me how do I get this modified version of TWRP to see the external card? It won't let me choose it and my backups and the original billard412 file is there? If I can just somehow mount the external sd or push another vrsion of TWRP I could get it to flash any of my other files, even retry the billard412 file. Stuck!

When I use twrp it'll let me flash from ext sd so I'm not sure what's going on there, but I would try to hook your phone to the pc and select mount ( not sure of exact title of the internal sd) maybe /sdcard0, then drag a copy from your pc to the phones internal sd card unmount from pc then flash it.

Sent from my SPH-L900 using Tapatalk 2
 

JukeboxJohnny

Member
Mar 28, 2011
44
1
I am assuming that the update release a couple days ago for the phone will not allow it to be rooted using this method anymore?

I want to root my Note 2, however I am worried if I do root it, I will still be constantly nagged to update my phone.
 

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
Hi All,

Having an issue going back to stock. I've tried to do as much homework as possible, but please forgive me if it's been covered. I've read the 40 pages of this thread and seem to be doing everything fine. I had no issues rooting with the toolkit, unrooting is proving harder.

I'm on LJC, with TWRP

I'm using Tookit 3.2.0

Option 42

Option 2

Option 7

I've tried both applying update from SD card and (option 1) and sideloading (option 2)

Both actually flash OK from what it seems. Option 1 gives no errors. Option 2 I go into sideload mode in TWRP and it seems to flash.

I still have SU (SuperSU) and still have TWRP. [EDIT] I did flash option 6 and got the stock recovery.

I went ahead and tried to apply the OTA update and it tried] to open TWRP and then had a black screen with just white text on the bottom saying it was flashing the OTA from the /cache/blahblah location.

I'm trying to do this without wiping data... is that even possible? If not I'm downloading the stock LJC rom to flash (option 8)... I'm assuming that's a complete re-format that takes it back to 100% factory minus the internal storage being wiped?

Not sure what to do from here.


EDIT

Well looks like I'll have to flash back completely to stock. I got it back to stock recovery but still rooted. Since I stupidly flashed the OTA update before unrooting/factory recovery I am now stuck on LJC and the OTA update is nowhere to be found. Update Samsung Software says I'm upto date.
 
Last edited:

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
Ok.... what have I done....


I got it back to stock no problem. Stock Odin flash, stock recovery.

Downloaded and installed MA7 update.

Tried to re-root with insecure + TWRP.

TWRP is back on the phone now, but I cannot get root. I've tried SuperSU and superuser.

What's weird is my kernel is not MA7... I'm guessing that's from TWRP?


attachment.php




Any ideas? I'm going to flash back to stock again, redownload the update.

Just for clarification, which options exactly should I choose under toolkit 3.2.0?

Option 42 -> Option 2 -> Which one? I tried Option 3, as that's what I did the first time and got root. Did sideload. With MA7 I tried sideload and flash via recovery (since the first failed attempt did get TWRP onto the phone).
 

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
Well now I'm really stuck...


I downloaded using option 8 the stock image... first time I flashed it a few steps back it was fine. Not it fails every time.

attachment.php



Now I'm really stuck... I swear guys I'm not a complete newb... been flashing phones since my Samsung Instinct.... NEVER "bricked" a phone. Granted this isn't a brick situation... I've never screwed up to the point where my phone is unusable.

I really don't know what else to do. I feel like I'm just making things worst.

Only saving grace is I CAN get into download mode.... however the stock image downloaded from the toolkit is failing. MD5 passes, drivers are not an issue. Out of ideas. Can somebody please help me out.
 

Attachments

  • failed_odin.JPG
    failed_odin.JPG
    98.9 KB · Views: 895

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
I'm willing to paypal somebody $10 if they can walk me through getting to MA7 stock rooted with a recovery don't care if its clockwordmod or TWRP.

I'm really stuck.
 

musclehead84

Senior Member
Nov 3, 2010
4,582
967
39
Falling Waters, WV
Re: [Galaxy Note2 TOOLKIT V3.0.0 SPRINT] Drivers, Backup, Root, CWM, TWRP, Flash to S

I'm willing to paypal somebody $10 if they can walk me through getting to MA7 stock rooted with a recovery don't care if its clockwordmod or TWRP.

I'm really stuck.

Did u get it figured out? If not pm me I'll help u

Sent from my SCH-I535 using xda premium
 
  • Like
Reactions: na_tra

Androidfreakz

Senior Member
Oct 12, 2010
326
41
I have a stock Note 2, on MA7 4.1.2, how to i get Tookit 3.2.0 for Just Root? I just want to Root but i currently Toolkit 3.0.0 with only 4.1.1 build those two out of date options... Any suggestions thx all.

Edit, found out a few pages back option 42 is my answer...thx
 
Last edited:

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
Would it be possible to share?

Basically:

1st Was to flash TWRP back on the phone to get a custom recovery (I was stuck on stock recovery)
I used the odin files in the toolkit, but couldn't use the toolkit itself as it wouldn't boot. Its no different than any other Odin flash.
2nd flashed back to stock using http://xdaforums.com/showthread.php?t=2086769
3rd flash using note 2 tookit, back to stock (Option 42 -> Option 8) Download, use toolkit to unpack, flash
4th Reboot back to stock LJC and download MA7 system update, apply OTA update as normal.
5th Flash MA7 kernel as mine did not update from here http://xdaforums.com/showthread.php?t=2139919
Then using tookit, re-root the phone. Option 42 -> Option 2 -> Option 3 | I used SuperSU and TWRP

That was it!
My fallen step was not flashing the stock ZIP listed above as step 2.... I was trying to flash back to stock using Option 8 in the tookit, but it kept failing the Odin flash. Flashing the ZIP above in step 2 first, fixed it. Something about the ZIP recovery not being 100% correct... so after flashing that, I was able to Odin flash using the tookit Option 8 back to stock.

Hope that helps, let me know if you need further clarification.
 
  • Like
Reactions: Kikoshi

na_tra

Senior Member
Feb 14, 2010
572
88
hi all:

I did a nandroid backup for my note2 through the toolkit. now, i want to restore it with that nandroid backup file. I put it in the external sdcard and used TWRP but it does not see the file. I tried to use the toolkit but did not know what to do after selected option 13: restore nandroid backup (from option4) via custom recovery.

how do I restore that nandroid backup back to my note2?

TIA
 

poor_red_neck

Senior Member
Feb 16, 2009
443
92
Raleigh, NC
hi all:

I did a nandroid backup for my note2 through the toolkit. now, i want to restore it with that nandroid backup file. I put it in the external sdcard and used TWRP but it does not see the file. I tried to use the toolkit but did not know what to do after selected option 13: restore nandroid backup (from option4) via custom recovery.

how do I restore that nandroid backup back to my note2?

TIA

I'm not 100% on this... but aren't "nandroid" backups specific to clockworkmod? If you have TWRP the backup will be under /storage/extSdCard/TWRP/blah blah/

It's the way the internal and external SD cards are laid out. I find it easier to navigate all the way up to "/" then goto Storage, then either "sdcard0" which is the internal card, or "extSdCard" which is... you guessed it the micro SD card.

I've never done a backup from the toolkit.. only within TWRP itself.
 

na_tra

Senior Member
Feb 14, 2010
572
88
I'm not 100% on this... but aren't "nandroid" backups specific to clockworkmod? If you have TWRP the backup will be under /storage/extSdCard/TWRP/blah blah/

It's the way the internal and external SD cards are laid out. I find it easier to navigate all the way up to "/" then goto Storage, then either "sdcard0" which is the internal card, or "extSdCard" which is... you guessed it the micro SD card.

I've never done a backup from the toolkit.. only within TWRP itself.

i put the nandroid file into twpr folder but still cant see anything.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 166
    [TOOLKIT] UNIFIED ANDROID TOOLKIT - SAMSUNG GALAXY NOTE 2 - Drivers, Root, Recovery + MORE

    GSM (GT-N7100) and LTE (GT-N7105) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1923956
    AUSTRALIAN GSM (GT-N7100T) and LTE (GT-N7105T) SUPPORTED. USE GSM THREAD
    SPRINT (SPH-L900) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1957155
    TMOBILE (SGH-T889) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=1957720
    MOBILICITY, VIDEOTRON, WIND [SGH-T889V] SUPPORTED. NO THREAD YET. USE TMOBILE THREAD
    AT&T (SGH-L317) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=2052779
    BELL, ROGERS, SASKTEL, TELUS [SGH-I317M] SUPPORTED. NO THREAD YET. USE AT&T THREAD
    VERIZON ([SCH-I605]) SUPPORTED. THREAD: http://xdaforums.com/showthread.php?t=2052788
    US CELLULAR (SCH-R950) SUPPORTED. NO THREAD YET. USE ANY
    KOREAN SK TELECOM [SHV-E250S] SUPPORTED. NO THREAD YET. USE ANY

    The Unified Android Toolkit brings together all the Nexus and Samsung Toolkits and supports many Nexus and Samsung devices. There is also an option at startup to run a Basic Android Toolkit which any Android device can use to install drivers, make app backups, install apk files, reboot the device into different modes and run a command prompt for manual input.

    FUNCTIONS OF UNIFIED ANDROID TOOLKIT
    * Install correct adb/fastboot drivers automatically on Windows xp/vista/7/8 32bit+64bit/Windows 10
    * Backup/Restore a single package or all apps, user data and Internal Storage
    * Backup your data from selectable folders [internal or external storage] to your PC for a Full Safe backup of data
    * Unlock/Re-Lock your Bootloader [Nexus]
    * Root Stock builds
    * Various Root options using insecure boot image or custom recovery
    * ALLINONE to Unlock, Root, Rename the Restore Files and install busybox [Nexus]
    * ALLINONE to flash custom Recovery Root, Rename the Restore Files and install busybox [Samsung]
    * [NEW] use SkipRoot boot image to Auto Root device, install Busybox Binaries and rename Recovery Restore files [selected devices]
    * Install BusyBox on your device
    * Perform a FULL NANDROID Backup of your system (Boot, Cache, Data, Recovery and System) via adb and save in Custom Recovery format on your PC which can be Restored via CWM Recovery [if insecure boot image available]
    * Fix extSdCard write permissions from installed apps in Android 4.4+ [Samsung]
    * Pull /data and /system folders, compress to a .tar file and save to your PC [if insecure boot image available]
    * Dump selected Device Partitions, compress to a .zip file with md5 and save to your PC [if insecure boot image available]
    * Extras, Tips and Tricks section
    * Auto Update ToolKit to latest available version at startup (professional only feature)
    * Program up to 10 Quickpick slots and run them very quickly (professional only feature)
    * Mods section to automatically perform certain tasks on your device
    * Download Google Stock Image directly to correct ToolKit folder for extracting and flashing [Nexus]
    * Check md5 of stock image to make sure downloaded file isn’t corrupted before flashing [Nexus]
    * Download Samsung Stock Firmware to PC for extracting and flashing via Odin [Samsung]
    * Flash Custom Recovery or Google Stock Image to Device
    * Flash any part of a stock Nexus image to device [boot, system, recovery] – Great for fixing broken parts of firmware
    * Rename the Recovery Restore File present on some Stock Roms
    * Boot into CWM Touch, TWRP, Philz Touch Recovery or Stock Recovery without Flashing it [Nexus]
    * Flash Custom Recovery to Device
    * Boot [Nexus] or Flash .img Files directly from your PC
    * Install a single apk or multiple apk’s to your device
    * Push Files from your PC to your device
    * Pull Files from your device to your PC
    * Disable forced encryption on Nexus6 and Nexus9 devices
    * Install Root Checker app by Burrows Apps
    * Install Backup/Restore app by MDroid Apps [calls log, sms, contacts]
    * Install EFS/Partition Backup/Restore app by Wanam
    * Dump selected LogCat buffers to your PC
    * Dump BugReport to your PC
    * Set Files Permissions on your device
    * Open new Command Prompt for manual input
    * Reboot device to Fastboot Mode or Android from fastboot mode [Nexus]
    * Reboot device to Fastboot Mode [Nexus], Recovery, Android or Download Mode [Samsung] from adb mode
    * Display Important Information about your device

    --------------------------------------------------------------
    Screenshot_Note4_20160114.png

    --------------------------------------------------------------

    SUPPORTED DEVICES AND LATEST SUPPORTED BUILDS *HERE*

    DOWNLOAD THE SKIPSOFT UNIFIED ANDROID TOOLKIT *HERE* (FROM SKIPSOFT.NET)

    NOTE: Key files are signed with a Digital Certificate from skipsoft.net but some ‘may’ get picked up as potentially harmful by Antivirus Programs and deleted. They are not harmful, this is a false positive given because of the compiler used. If this happens restore the file and exclude the folder from future scans to use it. This seems to happen mostly on AVG Free and Norton. If you are using the Auto Update feature on pro versions then you will need to disable the AV program or exclude the folder from scans before running the update again.

    Credits: ChainsDD for Superuser, Chainfire for SuperSU and kernel patches, koush and the clockworkmod team for cwm and the universal driver pack, 1wayjonny for the adb/fastboot driver pack, Adam Lange for all his support and help with the insecure kernels, Viperboy for the Knox Disabler app, Stephen Erickson for the BusyBox installer app, BurrowsApps for the Root Checker app, NextApp for the SD Fix app, fOmey for TWRP for the Galaxy Gear.

    --------------------------------------------------------------

    WHAT IS THE DIFFERENCE BETWEEN PUBLIC (FREE) AND PROFESSIONAL (DONATE) VERSIONS?
    THE PUBLIC VERSION OF THE TOOLKIT INCLUDES EVERYTHING YOU COULD NEED TO MANIPULATE AND ROOT YOUR DEVICE.

    ACTIVATING THE PROFESSIONAL VERSION ADDS THE MOST USEFUL FUNCTION IN THE TOOLKIT, THE ABILITY TO CHECK FOR ‘AUTO UPDATES’ DIRECTLY VIA THE TOOLKIT AND HAVE THEM PUSHED TO YOUR PC RIGHT AWAY AS SOON AS THEY ARE UPLOADED WITHOUT NEEDING TO DOWNLOAD THE WHOLE TOOLKIT EVERY TIME. YOU WILL ALWAYS HAVE THE LATEST VERSION AS SOON AS IT IS MADE AVAILABLE. THIS MEANS SMALLER UPDATES CAN BE SENT OUT MORE FREQUENTLY, SUCH AS ADDING A SINGLE FUNCTION, FIXING A BUG OR ADDING COMPATIBILITY FOR A SINGLE CARRIER. THE SMALLER UPDATES WILL BE COMPILED AND RELEASED TO THE XDA COMMUNITY AS A FULL (PUBLIC) DOWNLOAD VERSION SO PROFESSIONAL VERSIONS ARE ALWAYS UPDATED SOONER.
    THE PRO VERSION ALSO ADDS THE ABILITY TO CHECK FOR THE LATEST VERSION OF SUPERUSER AND RECOVERY FILES AND DOWNLOAD THEM DIRECTLY TO THE TOOLKIT.
    THE ‘QUICK PICKS’ SECTION[/B] ALLOWS YOU TO PROGRAM UPTO 10 SLOTS WITH TASKS THAT YOU MAY PERFORM ON A REGULAR BASIS OR JUST WANT TO KEEP A SET OF TASKS IN 1 PLACE. THEN JUST SELECT THE SLOT AND IT WILL REMEMBER ALL YOUR SETTINGS FOR THAT TASK AND RUN IT.
    PRO USERS CAN ALSO SELECT THE “ANY BUILD” OPTION IN THE BUILD SELECTION SCREEN TO ROOT ANY BUILD AS LONG AS THE VERSION IS SUPPORTED (USEFUL IF YOUR BUILD IS NOT LISTED).

    MORE IMPORTANTLY DONATING SHOWS YOUR APPRECIATION AND ALLOWS THE TOOLKIT TO CONTINUE TO EVOLVE AND GROW.

    AUTO REPLY LINKS FOR PAYPAL TO GET A CODE INSTANTLY CAN BE FOUND AT http://goo.gl/nyGqv

    --------------------------------------------------------------

    PLEASE READ THE *HELP* PAGE AT http://www.skipsoft.net/?page_id=1269 OR USE THE INFORMATION SECTION WITHIN THE TOOLKIT IF YOU HAVE ANY QUESTIONS. I HAVE TAKEN A LOT OF TIME TO WRITE IT AND SOMETHING ON THERE SHOULD ANSWER 99% OF PROBLEMS.

    --------------------------------------------------------------

    1. INSTALLING ADB/FASTBOOT DRIVERS

    The first thing you need to do is to install the adb/fastboot drivers. These are needed so that you can unlock your bootloader, root your device and perform other adb/fastboot functions.

    THE DRIVERS CAN BE INSTALLED DIRECTLY VIA THE TOOLKIT. OPTION 1 IN THE MAIN MENU.

    If drivers are not installed or there is an exclamation mark next to the device:
    Plug the device in to a usb cable directly connected to your motherboard.
    In the Device Manager a new item, usually called Android 1.0 should pop up in the list.
    Right click on the device item then left click on Update Driver Software. Select 'browse my computer' and then 'Let me pick from a list'.
    If no adb interface driver appears in the list then untick 'Show compatible hardware' and find the Android or Samsung adb interface driver.
    If you cannot find either of these click Have Disk, browse to the Toolkit install folder, drivers folder, click on android_winusb.inf and click Open.
    Click OK and select Google ADB Interface.

    Make sure you have USB debugging enabled in settings, developer options. In Android 4.2.2 or later you have to enable the developer options screen by going to settings, About on your device and click on Build number at the bottom 7 times until it says You are now a developer. If you have already enabled usb debugging then unplug/replug the usb cable.

    On Android 4.2.2 or later when you replug the usb cable after enabling usb debugging for the first time you will get a popup asking you to authenticate your pc. Tick 'Always allow' then click 'ok'.

    --------------------------------------------------------------

    2. USING SKIPSOFT UNIFIED ANDROID TOOLKIT

    When starting the Toolkit you will first be asked which device you want to work with. Working folders will be created and the device files downloaded. You will then be taken to the Model/Build selection screen where you can do a number of things (other than select your model/build): Type '00' to enter your activation code and enable pro features, 'i' will take you to the Information and Help Section, 'a' will give you information on how to add support for a new build.

    Supported builds are listed in the Model/Build selection screen and typing the associated number (i.e. 11) will download needed boot and recovery files (stock and custom recovery) then check for and download the latest superuser files available and custom recovery (pro versions only), verify all the files and start the Main Menu. You can now use all the functions and tools the Android Toolkit offers. Pro users can select the "any build" option to root any build (useful if your build is not listed).

    --------------------------------------------------------------

    USEFUL INFORMATION

    How to get into Recovery Mode
    1. Unplug the USB cable.
    2. Shut down the phone.
    3. Hold down the 'HOME' + 'VOLUME UP' buttons and press the 'POWER' button for about 5 seconds to enter Recovery Mode.

    How to get into Download Mode (For Odin)
    1. Unplug the USB cable.
    2. Shut down the phone.
    3. Hold down the 'HOME' + 'VOLUME DOWN' buttons and press the 'POWER' button for about 2 seconds until a WARNING! Screen appears. Press the 'VOLUME UP' button to enter Download Mode.

    --------------------------------------------------------------

    *DISCLAIMER*

    I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
    33
    **FAQ**

    Q. What is ADB Shell?

    Adb shell is a linux command line tool (because android is based on linux) used to send commands to your android device. For S-ON devices, this is crucial for modifying files in the /system partition (where the rom sits) as you cannot modify anything in /system when the rom is running without S-OFF (e.g removing system apps).

    From Google:

    Android Debug Bridge (adb) is a versatile tool lets you manage the state of an emulator instance or Android-powered device. It is a client-server program that includes three components:
    A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
    A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
    A daemon, which runs as a background process on each emulator or device instance.

    ----------------------------------------------------------------------------

    Q. I flashed CWM but each time I reboot the Stock Recovery is back

    There is an auto recovery restore system on Android that will reflash the Stock Recovery if you flash CWM on a Stock Rom.

    Use Root Explorer to Mount the system folder as R/W (or use a free app from the Market). Delete the file recovery-from-boot.p from /system. Now when you flash CWM Recovery it will NOT be overwritten after a reboot. You can also use the Toolkit to rename the files if you wish.

    ----------------------------------------------------------------------------

    Q. What is the difference between Nandroid and Titanium backup?

    A NANDROID will backup the whole system including boot, system, data and recovery partitions so you can restore a complete rom and all data and settings.

    Essentially Titanium Backup is used to backup apps and associated user data. These could be restored AFTER a full wipe and a new Rom had been flashed on your phone.

    The other option now which google added into the new adb command list is the adb backup which is in the ToolKit and can do the same job as Titanium Backup but will store the data on your PC rather than on the phone (where it takes up space and could be deleted).

    ----------------------------------------------------------------------------

    Q. When would i perform a nandroid vs a titanium backup?

    You would perform a nandroid backup to back up your entire system including boot image and data and system partitions so you can restore your entire system back to that particular point in the future.

    You would use Titanium Backup mainly to back up your installed apps and settings so they could be reinstalled easily and quickly on any future roms. You can also choose individual apps to backup or restore on Titanium Backup whereas if you restore your boot partition via CWM Recovery you are stuck with the whole lot.

    ----------------------------------------------------------------------------

    Q. When I try to open the ToolKit I get a box pop up for a split second and then it goes away. My AntiVirus program says the file may be harmful.

    The exe files I compiled are not digitally signed with a Microsoft certificate (as they cost money) so certain AntiVirus programs (mainly Norton and AVG Free) will pick it up as potentially harmful when it is not. They pick up ANY file that doesnt contain a purchased Microsoft certificate in the same way. Restore the deleted file and exclude it from further scans and it will be fine.

    ----------------------------------------------------------------------------

    Q. I donated but where do I get my activation code from?

    Donation Codes are sent out manually to your PayPal email address [unless otherwise stated] after a confirmation email from PayPal has been receive. The Code can then be entered in the ToolKit Settings, Activate Donators Features Screen. This will enable The Auto Updates, Quick Picks and Extras Features in the ToolKit. Please be patient when waiting for the Code to be sent as it depends very much on what I am doing and whether I am at my PC when the donation is made. Please do not post in the ToolKit's thread or pm me asking for the activation code as it clogs up the thread and my messages. If you haven't received your code after 24 hours then feel free to email me via the skipsoft.net contact page.

    Don't worry that you have been forgotten about, I check all emails personally and will deal with it as soon as I can.

    ----------------------------------------------------------------------------

    Q. I have Windows 8 and cannot install the drivers

    How to Disable Driver Signature Enforcement in Windows 8:

    From the Metro Start Screen, open Settings (move your mouse to the bottom-right-corner of the screen and wait for the pop-out bar to appear, then click the Gear icon).
    Click ‘More PC Settings’.
    Click ‘General’.
    Scroll down, and click ‘Restart now’ under ‘Advanced startup’.
    Wait a bit.
    Click ‘Troubleshoot’.
    Click ‘Advanced Options’
    Click ‘Windows Startup Settings’
    Click Restart.

    When your computer restarts, select ‘Disable driver signature enforcement‘ from the list. You can now load your modified driver. Reboot again once the driver is installed and all will be well.

    ----------------------------------------------------------------------------

    Q. I flashed the Stock Firmware Image. Odin flashes the file successfully and the phone reboots but it stays stuck on the samsung logo

    If the firmware tar file does not include a userdata image (which most Samsung firmware do not) then your userdata partition will be left from your previous setup. If this is incompatible with the new firmware because of build or something else then your system will freeze on boot up.

    This is easily fixable by holding the Volume UP, Home and Power buttons all at the same time for about 10 seconds until the device reboots to the Stock Recovery screen. Use the Volume Down button to scroll down to 'wipe data/factory reset' and press the Home button to select it. Go down to yes to confirm and your userdata partition will be wiped. Your device should now boot fine.
    19
    **RESERVED FOR MANUAL INSTRUCTIONS**
    19
    How To Videos on the Samsung Galaxy Note II ToolKit

    Reserved for how to videos on this incredible toolkit!
    http://www.youtube.com/playlist?list=PLwCVKEYxr_z7FBQYT32dbYw_kdSJmSDH2

    How To Root
    http://www.youtube.com/watch?v=M9zF6x1MURM


    How To Flash Stock Recovery
    http://www.youtube.com/watch?v=9CL5x84Tu_U

    12
    SAMSUNG GALAXY NOTE 2 TOOLKIT V4.1.0 PUBLIC BUILD RELEASED!!

    Ok here it is at last for all you patient people. Sorry for the wait :)

    ChangeLog
    ToolKit v4.1.0 (9th April 2013)
    +Updated complete Toolkit structure for easier support and faster updates
    +Added GT-N7100T and GT-N7105T models to the support list
    +Added 4.1.2 support for many models. See screenshot for full list
    +Updated CWM and TWRP Recovery to the latest model specific version
    +Added TWRP NAND backup/restore procedure to backups section
    +Updated SuperSU Root procedure to V1.25
    +Updated Samsung usb drivers to 1.5.18.0
    +Added more error detection and updated many parts of the Toolkit procedures
    +Added Activation option and support procedure for new builds to Model Screen
    +Updated Stock firmware download section with new Samsung images
    +Adb server is now shut down if you exit from Model Selection screen
    +Added more error control Toolkit processes
    +Updated mods section

    Download link in the first post. Please do not mirror the file as I need to keep a check on the stats.

    Enjoy.

    Mark.