Search This thread

R_AL_Sim

Senior Member
Sep 23, 2004
56
3
UK
has anyone noticed that the built in phone call recorder only records 20 seconds then stops recording is this a CM 10 issue or a defy issue
 

Antiga Prime

Senior Member
Sep 25, 2012
994
637
has anyone noticed that the built in phone call recorder only records 20 seconds then stops recording is this a CM 10 issue or a defy issue
In an earlier post someone claims that video recording looses audio after 20 seconds. Maybe a coincidence, maybe not...

Well, I just double checked, and most, if not all, of the calls I have recorded only last about a few seconds. On the 03/18 build, almost all the videos I've recorded lose audio after 60 seconds. On the other hand, I have some videos recorded last year, most likely on builds prior to December 25th, that are a few minutes long and there is no audio loss.

But as far as I can remember, the built-in recording feature on CM10 has never recorded the full phone call, at least not for me, so I've been using call spy which has given me pretty decent results.
 

jointino

Member
Sep 16, 2011
32
3
Naples
battery issue

hi everybody,

i think it's with some update of february that my battery has this wierd behaviour,

it's charged very fast, and collapse very fast.

i think i'm missing some patch or other stuff,

any suggestions ?

tnx a lot
marco
 

FaulFels

Senior Member
Jun 15, 2011
259
128
Köln (Cologne)
i think it's with some update of february that my battery has this wierd behaviour,

it's charged very fast, and collapse very fast.

  • Let the battery drain until the phone powers of by itself.
  • Then charge it at least another two hours when it says charged to 100%.
  • Let the battery again drain until the phone powers of by itself.
  • Charge again a litte longer when reaching the 100%.

That should fix this issue. Otherwise your battery is too old and you should get a new one.
 

jointino

Member
Sep 16, 2011
32
3
Naples
  • Let the battery drain until the phone powers of by itself.
  • Then charge it at least another two hours when it says charged to 100%.
  • Let the battery again drain until the phone powers of by itself.
  • Charge again a litte longer when reaching the 100%.

That should fix this issue. Otherwise your battery is too old and you should get a new one.

i tried to do this more than one time, but never changed,
i tried also to unplug the charger after the 100% to reset the battery stats, but nothing.

other suggestions ?

the battery discharging collapse 2 times, and while it's charging jump from 4% to 30% and maybe 50% to 70%
it's weird it's like some cells of the battery are ghost
 

javlada

Senior Member
Nov 21, 2009
202
17
I hope it solves the problem with WiFi driver preventing the phone from going to deep sleep, right? I'll check it as soon as I get home from work.
 

drawkcaB

Senior Member
Jun 28, 2012
132
38
Mumbai
i tried to do this more than one time, but never changed,
i tried also to unplug the charger after the 100% to reset the battery stats, but nothing.

other suggestions ?

the battery discharging collapse 2 times, and while it's charging jump from 4% to 30% and maybe 50% to 70%
it's weird it's like some cells of the battery are ghost

Head over to the cm10 faq and look for working red lens battd. this works for both green and red lens defy mb525 1500miah battery
 
  • Like
Reactions: jointino

sepp.

Senior Member
Jan 8, 2013
72
56
CM10-20130409-NIGHTLY-mb526.zip seems to sleep

It looks like mem sleep is successfull now with wifi enabled :good:

It is of course a bit early too say 10 mins with the build

Code:
[  445.173614] PM: Entering mem sleep
<4>[  445.173950] Suspending console(s) (use no_console_suspend to debug)
<7>[  445.182495] vfp_pm_save_context: saving vfp state
<6>[  445.182769] PM: Resume timer in 11 secs (362315 ticks at 32768 ticks/sec.)
<6>[  456.244079] Successfully put all powerdomains to target state
<6>[  456.334350] PM: Resume timer in 27 secs (908328 ticks at 32768 ticks/sec.)
<6>[  461.807281] Successfully put all powerdomains to target state
<6>[  461.808319] wakeup wake lock: wl1271_wake
<7>[  461.837066] PM: Finishing wakeup.
<4>[  461.837310] Restarting tasks ... done.

Thank you Quarx
.. and please may I ask for an update of the manifest for the repo, so we can build again

Edit after 100 mins uptime: still looking good
 
Last edited:
  • Like
Reactions: frozenwaverider

yonef

Senior Member
Jul 28, 2006
155
5
Plovdiv
how can I get rid of the darkened area of the picture on incoming call ? it is realy annoying thing :( It is difficult to see whos calling :(
 

Attachments

  • Screenshot_2013-04-09-18-53-55.jpg
    Screenshot_2013-04-09-18-53-55.jpg
    30.2 KB · Views: 810
  • Like
Reactions: jordisbel

pl4yeR

Senior Member
Dec 20, 2008
131
25
It looks like mem sleep is successfull now with wifi enabled :good:

It is of course a bit early too say 10 mins with the build

Code:
[  445.173614] PM: Entering mem sleep
<4>[  445.173950] Suspending console(s) (use no_console_suspend to debug)
<7>[  445.182495] vfp_pm_save_context: saving vfp state
<6>[  445.182769] PM: Resume timer in 11 secs (362315 ticks at 32768 ticks/sec.)
<6>[  456.244079] Successfully put all powerdomains to target state
<6>[  456.334350] PM: Resume timer in 27 secs (908328 ticks at 32768 ticks/sec.)
<6>[  461.807281] Successfully put all powerdomains to target state
<6>[  461.808319] wakeup wake lock: wl1271_wake
<7>[  461.837066] PM: Finishing wakeup.
<4>[  461.837310] Restarting tasks ... done.

Thank you Quarx
.. and please may I ask for an update of the manifest for the repo, so we can build again

Edit after 100 mins uptime: still looking good

I can confirm this too. My phone completely enter deep sleep while Wi-Fi on.so far so good. Excellent job! ! You're a genius!

Sent from my Defy. Jelly Bean 4.1.2.
 

turffe

Senior Member
Jul 14, 2012
413
209
27
Kaunas
Redmi 9
Apple iPhone 12
how can I get rid of the darkened area of the picture on incoming call ? it is realy annoying thing :( It is difficult to see whos calling :(
Change your lockscreen wallpaper with your custom ones, when it will show wallpapered background. THis also includes players lkie Apollo or Play music. With custom lockscreen wallpapers it shows no black background.
 

pl4yeR

Senior Member
Dec 20, 2008
131
25
When I start Wi-Fi ap, phone it's closed and ask me to enter pin again. When I enter the pin data goes on again, but internet connection is not share with the net created. Maybe a bug? Someone else?

Sent from my Defy. Jelly Bean 4.1.2.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 1710
    Android 4.1.2 Jellybean for Defy and Defy+

    Download Link: http://quarx2k.ru
    Epsylon3 Builds: http://defy.wdscript.fr/
    Mirrors: http://defy.bytekiste.de/
    http://d-h.st/users/Quarx
    Gapps: http://goo.im/gapps/
    Minimal gaaps(Gmail,Market,Gtalk,Synchronisation) http://quarx2k.ru/gapps-jb-20120726-minimal.zip
    Gapps + Working Google Now - http://xdaforums.com/showthread.php?p=30988910

    Status:
    12.07: Boot up :)
    14.07: Phone, Mobile Data, USB, Mass storage, Sensors, Camera(Photo), GPS/AGPS.
    18.07: Audio (thanks to maniac103), Video rec/play, Panorama, FM-Radio.
    19.07: Install app to sdcard, mp3 codec, video codec fixes, rework fm-radio, cyan update.
    22.07: Usb fixes, USB Tethering, Data Usage, Preferred Network (umts/cdma) selection, CrystalTalk
    23.07: Fix audio lock-ups (thanks to nadlabak), a2dp, fix volume change, OS FMRadio and fm volume change in background by maniac103, leds
    26.07: Themes, button backlight, fix lag bootanimation, imei/mac... cyanogen updates.
    28.07: re-fix button backlight, holo fm-radio, Option for enable/disable On-Screen Button(36dp)
    04.08: Fix volume rocker music controls, Realtime switch of OnScreenButtons and size of it, Phone/SMS apps now in memory all the time, Enable CPU TLS Register, Auto-Backlight Settings, Boosted governor by default... maybe forgot some more..
    08.08: Improved stablity of camera (bayer have problem with sound), DroidSSHD, Trebuchet, common stablity fixes.
    10.08: update Moto RIL to v4, fm-radio to lockscreen, hwui blacklist on mb525, fix realtime OnScreenButtons, Fix MotoPortal, Disable get local ipv6 adress.
    12.08: Auto-backup battd, Port phone features from cm9, Add national data roaming and make it optional (from AOKP).
    22.08: Fix ability change brightness of buttons(Defyparts), compass fix, Apollo intent fix (which fixes last.fm etc), dalvik heap 128mb -> 48mb, wifi changes
    25.08: Disable lock in memory Phone and sms apps(by users requests), fix OnScreenButtons, ipv6 tweaks.
    28.08: Fix 00:00:00:00:00:00 SSID in apps, fix audio routing in dock modes
    03.09: Fix Audio in video rec(not ideal) and decrease fps in preview camera (not in video), 2Channels for audio, DSP-Manager in software which support JB (ex, apollo) it's not a bug, support multiboot, wifi-tethering (thanks ot devs of ml2, maybe have bugs, not tested)
    04.09: Fix compass, update sgx libs to JB, fix wallpapers, improve video perfomance, new touch driver (for test, only 2 fingers for now, more will be enabled in next build).
    12.09: Fixed touch driver (allow touches upto 10), Fix for data connection, thanks to SlugZero, also some more fixes for stability ril, disable fps limit in preview.
    24.09: Video rec fixes, add 720p rec (not by default, unstable),cyanogen updates.
    2ndboot builds: one build for mb525&526
    10.10 Android 4.1.2, CRT-Animation , custom kernel, experimental. Included patch for flashlght(not tested, but shouldn't burn it)
    11.10 Fix red camera, updated 2ndboot.ko, fix pds mount and permissions.
    18.10 Kernel update:fix wifi tether(reboot), reduce battery drain, fix charge only mode, cleanup unused drivers, fix button lights, fix slow boot and lags after boot.
    02.11 Add power hal, interactive governor+bootpulse(should be default in bootemnu for correct work power hal),kernel fixes from upstream, cleanup/disable unused drivers, fix SGX clocks, add bp_ptc service(only service), fix battery drain, add fuse rw-ntfs/extfat fs support(not tested, but should work), fix backlight settings, fix small problem with fm-radio on notfication drawer, add cm file manager(can work incorrect), restore live wallpapers, cm sync....

    17.11 Update kernel to 2.6.32-60, backport some optimisation from 4.2, fix mount options for ext4, cyanogen update, restore conversion to RGB->YV12 for video.
    18.11 Apply many optimisations: Android compiled with latest Linaro toolchain GCC-4.7, kernel compiled with Linaro toolchain GCC-4.5.4. Little wifi fixes.
    28.11 Disable linaro for android, fix adhoch, new battd, fix bt.
    04.12 Partial linaro, Fix upnp/dlna(thanks to nadlabak), fix reboot in bootmenu/recovery, cyan fixes.
    05.12 Fix root, fix adb, fix ROOT/ADB settings from dev menu , cyan fixes.
    22.12 Stability fixes, cyan updates.
    23.12 Fix shutdown, built-in call rec function(thanks to nadlabak).
    29.12 Revert to .9 kernel (for audio tests and stability), fix root permissions on CMFileManager, adb can be disabled now, bootmenu now has only one custom recovery option.
    30.12 Restore .60 kernel, some fixes in android which can cause ringing problems.
    07.01 Again fix root permissions on CMFileManager, fix battery when ADB disabledl, again some fixes which can cause ringing problems.
    17.02 rgnd service, increase performance of camera.
    07.03 Fix for deskclock (from YetAnotherForumUser). Based on clean 2.6.32 moto tree, should fix many random problems... or add more :p
    24.03 Completely new wifi/wifi-ap driver, switch to wpa_supplicant8, Wifi ap AP - 72mbps :)
    25.03 Some fixes in wifi, fixed MAC, WiFi direct implemented
    26.03 Improved stability of wifi.
    09.04 Suspend optimization.
    11.05 Updated USB-Gadget to native for 4.x, fix mtp/ptp/storage/tethering. Removed usb.apk/usbd.
    16.05 Very experimental build, contain a lot of updates from kernels 2.6.33 - 3.1. Increased performance, added swap. Memory management updated to 2.6.39(3.0) state. Some parts updated to 3.1. Blechd0se patches for interactive gov.
    22/23+ experimental.
    16.06 Updated wifi driver & wpa_supplicant, improvement in interactive governor by @Blechd0se. Updated kernel with some patches from upstream.
    09.07 Stability fixes. Updated bootmenu. This build not contain ZCache/Zram/Swap
    30.10 Fixed Video playback, latest kernel changes(same as 10.2), gpu 266mhz...

    TIPS: LG Camera app works better with video rec.
    Do not enable "Allow purging of assets" - it makes many lags.

    Some users ask about new donate app, https://play.google.com/store/apps/details?id=com.donatecm_10 :)

    F.A.Q
    Just funny video:)

    device-2012-07-13-002749.jpgdevice-2012-07-13-002457.jpgdevice-2012-07-13-002509.jpg
    128
    I appreciate some of the comments here about the difficulty of keeping threads like this cleaned and organized, especially with so many users not following instructions. However, this is the job I signed up for, so it's not a big deal. :)

    That being said, since nothing else seems to be working, I'm going to temporarily close this to force people to use the other support threads for this ROM. If you have a legitimate bug to report and serious question that needs answering, use the support threads (an absolute last resort would be PMing the developer). This will be reopened at the appropriate time.

    [Support] - [JB] CM10 Android 4.1.1 for the Defy(+)
    [FAQ] [JB] CM10 for Defy/Defy+ (by Quarx) (Added DPI Mod Guide)
    [SUPPORT] Quarx's CM10 PROBLEMS reporting thread

    closed_cleaning.png
    105
    Build will not removed.
    Demo build is uploaded for everyone.;)

    Android 4.2 has new libc/linker, which breaks compatibility with old moto binaries. Need some time to fix it:)
    And i think, better discuss 4.2 in different thread.
    73
    Sound now works:)
    All thanks for help to maniac103:)
    68
    Thanks guys for found workaround, it can be caused by adb.
    Please try this ramdisk and check battery http://quarx2k.ru/ramdisk
    Replace in /system/bootmenu/2nd-boot