CyanogenMod 10 is a free, community built distribution of Android 4.1.2 (Jellybean) which greatly extends the capabilities of your phone.
This is a preview build of CM10 for the Samsung Galaxy Player 4. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Note: Please backup your efs in case of something goes wrong (the zip should backup it but we're never too sure) To do so execute this command:
Preview Install instructions:
*** If upgrading from CM9, it is recommended that you wipe data.
1. Download cm-9-20130402-kernel-preflash.zip
md5: 4a900fcddbc3d81d121a7b9c9d4bb0a0
2. Download cm-10-20130614-EXPERIMENTAL-ypg1.zip
3. Make all your backups.
4. Make sure your efs is intact (not blank).
5. Boot into recovery, make more backups.
6. Flash cm-9-20130402-kernel-preflash.zip (temporary workaround for first-time install)
7. Flash cm-10-20130614-EXPERIMENTAL-ypg1.zip
Installation Notes:
When you install for the first time, there is a conversion to the new MTD partition layout. The installer will flash the new kernel and reboot. It is possible for this process to hang up on the samsung logo (still working that part out). It is normal to see the Samsung logo appear 3 seperate times during this reboot phase. **Please wait at least a minute before assuming you are stuck.** If this happens, you should extract the boot.img from the installer zip and flash it with heimdall (heimdall flash --kernel boot.img, or other appropriate GUI methods). It should boot back into recovery and continue the installation. Once the install finishes, it should reboot once more back into recovery, which gives you the opportunity to flash your gapps.
**Google Apps are not included in these ROMs. You'll need to install those yourself if you want them. Recommended and highly suggested are the 4.1.2 gapps from goo.im.
Install video thanks to daniel644
Known Issues:
-Bluetooth Fixed 6/14
- Camera mostly working: Front cam doesn't take pictures, and is sideways. Video recording is limited to 800x600.
-3-finger recovery boot temporarily disabled. Fixed 6/14
-Mass storage in recovery mounts external sdcard Fixed 4/21
-GPS Fixed 4/21
-VPN Fixed wtih 3.0 kernel
-Weak Vibration Fixed wtih 3.0 kernel
-USB tether Fixed wtih 3.0 kernel
- Other things
Sources
Jellybean3.0 branch:
Device tree: https://github.com/bbelos/android_device_samsung_ypg1
ypg1-dev branch:
Kernel source: https://github.com/bbelos/android_kernel_samsung_aries
Previous versions:Install video thanks to daniel644:
3.0 kernel:
cm-10-20130610-UNOFFICIAL-ypg1.zip
2.6 kernel:
cm-10-20130421-EXPERIMENTAL-ypg1.zip
cm-10-20130416-EXPERIMENTAL-ypg1.zip
cm-10-20130414-EXPERIMENTAL-ypg1.zip
cm-10-20130413-EXPERIMENTAL-ypg1.zip
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a preview build of CM10 for the Samsung Galaxy Player 4. It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
Note: Please backup your efs in case of something goes wrong (the zip should backup it but we're never too sure) To do so execute this command:
Code:
dd if=/dev/block/stl3 of=/sdcard/efs.rfs
Preview Install instructions:
*** If upgrading from CM9, it is recommended that you wipe data.
1. Download cm-9-20130402-kernel-preflash.zip
md5: 4a900fcddbc3d81d121a7b9c9d4bb0a0
2. Download cm-10-20130614-EXPERIMENTAL-ypg1.zip
3. Make all your backups.
4. Make sure your efs is intact (not blank).
5. Boot into recovery, make more backups.
6. Flash cm-9-20130402-kernel-preflash.zip (temporary workaround for first-time install)
7. Flash cm-10-20130614-EXPERIMENTAL-ypg1.zip
Installation Notes:
When you install for the first time, there is a conversion to the new MTD partition layout. The installer will flash the new kernel and reboot. It is possible for this process to hang up on the samsung logo (still working that part out). It is normal to see the Samsung logo appear 3 seperate times during this reboot phase. **Please wait at least a minute before assuming you are stuck.** If this happens, you should extract the boot.img from the installer zip and flash it with heimdall (heimdall flash --kernel boot.img, or other appropriate GUI methods). It should boot back into recovery and continue the installation. Once the install finishes, it should reboot once more back into recovery, which gives you the opportunity to flash your gapps.
**Google Apps are not included in these ROMs. You'll need to install those yourself if you want them. Recommended and highly suggested are the 4.1.2 gapps from goo.im.
Install video thanks to daniel644
Known Issues:
-
- Camera mostly working: Front cam doesn't take pictures, and is sideways. Video recording is limited to 800x600.
-
-
-
-
-
-
- Other things
Sources
Jellybean3.0 branch:
Device tree: https://github.com/bbelos/android_device_samsung_ypg1
ypg1-dev branch:
Kernel source: https://github.com/bbelos/android_kernel_samsung_aries
Previous versions:Install video thanks to daniel644:
3.0 kernel:
cm-10-20130610-UNOFFICIAL-ypg1.zip
2.6 kernel:
cm-10-20130421-EXPERIMENTAL-ypg1.zip
cm-10-20130416-EXPERIMENTAL-ypg1.zip
cm-10-20130414-EXPERIMENTAL-ypg1.zip
cm-10-20130413-EXPERIMENTAL-ypg1.zip
Last edited: