[KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)
- Thread starter aristo2jzgte
- Start date
-
- Tags
- development
- Status
All I get is boot loops with liquid smooth rom. I saw some other people in this thread say it works great with it. How did you get it to work?
Just make sure to use the latest version. The OP is three versions out of date. The latest is 1.9
http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.9x-AOSP-LTE.zip&can=2&q=
Which one do we download if we've on a T-Mobile note 2? I think I flashed the wrong one.. I flash the t0lte 1.9 kernel but wen I go to about phone it says unknown kernel
Sent from my GT-N7105 using xda app-developers app
Sent from my GT-N7105 using xda app-developers app
Always flash the LTE version. There's an AOSP LTE version and a TW LTE version. Flash the one appropriate to your ROM.
I'm not the developer. Just pointing out the update.Thanks for making my Avatar ROM buttery smooth, really good update
Well thanks anyway, btw uNEAk engine 2.0.1 was available via OTA as soon as I installed 2.0 from the market.
We need a uNEAK Engine thread, maybe a setup guide, lots of options in there.
Stock settings? :] I wanna go back on the NEAK kernel but it messes up the notification LEDs. Until that's fixed I'll be staying off it
I don't have any LED issues, but I use Light manager so maybe that overrides it.
No one mentioned the LED recently. I've looked back through mid-March with no reports about it. In any case, I'm on the latest 2.0.1 and have zero issues with the notification LED. It fades in and out blue and red for messages and emails respectively. It is solid orange for charging, and solid green when charged. Is yours supposed to do something differently, or have I misunderstood your question?
Last edited:
http://xdaforums.com/showpost.php?p=41939181&postcount=2277
The issue was posted by myself originally in that thread when I noticed the LED colors not being consistent. Green would turn into red or just shut off by itself after a few seconds. Orange would turn into red as well. Blue/Red seemed to be the only colors who weren't affected.
The issue was posted by myself originally in that thread when I noticed the LED colors not being consistent. Green would turn into red or just shut off by itself after a few seconds. Orange would turn into red as well. Blue/Red seemed to be the only colors who weren't affected.
Oooooh. Ok. We were talking about a different thread. That's why I was so confused.
Ok, so the LED issue you guys have is when using all ROMs? Did you try using Light Manager? I'm curious, since I'm on Carbon nightlies with Neak 2.0.1 and have zero LED issues. I've been on Neak since 1.7 and haven't had any noticeable LED issues either.
- Status
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
33Angry [KERNEL][05.2][AOSP&SAMMY][APP/OTA/AUDIO] N.E.A.K. Note2 - Wanna Try? (v1.6x)
Uploaded with ImageShack.us
The Lightest Kernel for the N7100/5 Ever Made!!
Features
- Based on Samsung official sources (updated to N8000u1), updated to 3.0.58
- Governors: PegasusQ (default), Ondemand, LulzactiveV2, Performance, Conservative (module), Lazy (module)
- Schedulers: BFQv5, Noop, SIO, VR (default)
- Using JRCU (++smoothness, ++responsiveness)
- XZ Compression only for KERNEL (--size)
- Fully compatible with: uNEAK ENGINE, MC Manager, Tegrak's Lulzactive app, Voltage Control, SetCPU, NSTools
- Fully compatible with 4.1.2 ROMs
- Fixed exynos-mem bug exploit (thx to Sammy)
- Fixed SDS death bug (thx to Sammy)
- Wolfson Audio Control (thx to AndiP for the implementation) ----> featured in uNEAK Engine
RAMDISK AND MISC:
- LED Fade support (thx to teamhacksung)
- Init.d Support
- CIFS and FUSE built in the kernel (no modules)
- Android Logger (logcat) already enabled into the kernel
- Multi-Core Interface (renewed Tegrak's 2ndCore) -----> CLICK HERE for infos
- FSync Control Interface (thx to Ezekeel - featured into uNEAK Engine)
- TouchBooster Control (thx to franciscofranco)
- CM10.1 and derivates support (AOSP)
CPU/GPU:
- NO OC!!!! (200-1600Mhz)
- CPU Undervolt support (thx to netarchy, Entropy512 & AndreiLux)
- Complete control of freqs/voltages with Voltage Control/SetCPU/uNEAK
- GPU Overclock/Undervolt & Stepcount Interface (by gm & AndreiLux)
- Charging current interface support (original by gm, ported by me) ----> AC, USB, MISC and DOCK supported
MEMORY & PERFORMACES:
- ARM CPU Topology + Sched_MC (can be enabled via uNEAK Engine, disabled by default)
- SLQB Memory Allocator (better memory management)
- Improved memory management functions
- Allow CPU Unaligned access (++performaces)
- AFTR ARM Idle Mode (enable via uNEAK Engine) (++battery)
CONNECTIVITY TWEAKS:
- Stochastic Fair Blue NET Scheduler
- Proportional Rate Reduction for TCP
- Reduced debugging WiFi/BT
- TCP/IP Tweaks
- TCP buffer tweaks
OPTIMIZATIONS:
- NO EXFAT SUPPORT (do not even ask for it please)
- Heavily reduced debug system (logcat and last_kmsg support is still there) (++speed, --size)
- Heavily Optimised TouchBooster logic ----> greatly improved smoothness
- SW Sync framework support
- Using Standalone Hotplug driver with non-hotplug governors (thx to gm)
- 3 CPU cores OFF when screen is locked (thx to arighi for original implementation) ----> with non-hotplug govs
- Upstream patches and fixes from Linux mainline kernel
- Compiled with Linaro GCC 4.7 (2012.12) + NEAK CFLAGS (heavily optimised) + Graphite Optimisations
- Optimised EXT4 filesystem
- Generally optimised code (removed useless functions and variables, fixed warnings)
and many others...
N7100 GSM RELEASES:
v1.6x SAMSUNG FWs & Derivates Zip:: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.zip&can=2&q=
v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...il?name=N.E.A.K-Note2-1.6x-SAMMY.tar&can=2&q=
v1.6x CM10/CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...ail?name=N.E.A.K-Note2-1.6x-AOSP.zip&can=2&q=
v1.6x CM10/CM10.1 & Derivates TAR: [urlhttp://code.google.com/p/neak-kernel-note2/downloads/detail?name=N.E.A.K-Note2-1.6x-AOSP.tar&can=2&q=[/url]
N7105 LTE RELEASES: "For T-mobile T889"
v1.6x SAMSUNG FWs & Derivates Zip: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.zip&can=2&q=
v1.6x SAMSUNG FWs & Derivates TAR: http://code.google.com/p/neak-kerne...ame=N.E.A.K-Note2-1.6x-SAMMY-LTE.tar&can=2&q=
v1.6x CM10.1 & Derivates Zip: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.zip&can=2&q=
v1.6x CM10.1 & Derivates TAR: http://code.google.com/p/neak-kerne...name=N.E.A.K-Note2-1.6x-AOSP-LTE.tar&can=2&q=
CHANGELOG
v1.6x (AOSP&SAMMY):
Quote:
KERNEL:
- Should solve all the battery drain issues (hopefully)
- Reverted some patch related to cpuidle and workqueue
- Dynamically adjust cpufreq_max_limit according to scaling_max (Yank555)
RAMDISKS:
- Updates and refactorings of post-init tweaks (thx to dorimanx)
v1.5x (AOSP&SAMMY):
Quote:
KERNEL:
- Updated to Linux 3.0.61
- Updated Wolfson Sound to 1.4.9
- Should fix many mic problems (not tested tho)
- BFQ updated to v5r1
- Reworked voltages interface (thx to AndreiLux)
- wakelock: use single threaded workqueueus
RAMDISKS:
- Updated CM10.1 ramdisks (AOSP)
MISC:
- Now releasing LTE AOSP version (AOSP)
RAMDISKS:
- post-init: allowing any kind of init.d script name
- Updated CM10.1 ramdisks
MISC:
- Works with newest CM10.1 and derivates
Please give all credits and thanks to "Simone201" this is his kernal, He was kind of enough to let me share his kernal to all of us!33
FYI If you are using Carbon the Voodoo app will no longer work but you can get the uNEAK app on the market to control Wolfson (voodoo)
Sent By An Idiot With A Phablet!
