I did post 2 point 4 and do not see Microsoft USB Sync but only HTC USB Sync as wrote schbounz. It is OK? Can I continue?
PS> Thanks for instruction
sorry to bother you guys with this, but how do I install active sync on Vista? installation always stops and says its for winXP only and for sync I ve always used Windows Mobile Device Center, but it seems drivers are totally different.
your device when you connect it via USB gives 3 options, the first is ACTIVE SYNC, second is USB etc etc. you need to select Active Sync.
(I didnt add it to the tutorial because i thought it was obvious!!!! )
MG
AAA thats what that means ok, my bad, it is obvious, i just got a little confused...
Cmd>task 28 55aa
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0x9500, total sector=0x11180
Storage start block=629, total block=1094
Total Bad Block in CE: 0
Erase physical block from 919 to 2048
formatstorage Bad block found: 1736
Format end
Hey dude... i think you should mention in the How To that Hard-SPL IS REQUIRED to use this software...
Some nuts have been using this with original SPL and bricked their phone badly...
So again: THIS SHOULD BE USED WITH HARD-SPL ONLY, NOT STOCK SPL's!!!
Are you serious? people are that stupid?
Ill add to the first post!!
Yup... up to 5 diamond's bricked in the spanish forums what ive heard
So put it in big red letters
ye thats true! well in fact 2-3 ppl not 5
i wrote the tutorial and i wrote in bold
IMPORTANT NOTE: YOU NEED A HARDSPL
but looks like some ppl dont read xD
btw MG i upgraded to windows7 , used the drievrs you posted and worked perfectly so thanks
Follow this procedure for FLASHING YOUR ROM FROM INTERNAL STORAGE AFTER MTTY
8: ...press "Vol Up" and IMMEDIATELY press and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash
8: Hard-reset (Pen Reset, then Press and Hold Vol Down and Circle) on completion "Press Vol Up To Boot" Is displayed, press "Vol Up" and IMMEDIATELY press and hold "Vol Down and Back" (Back = Small Arrow above "End Call" Button) to Initiate ROM Flash
uhm i dont know man. Everytime ive flashed like 3 or 4 times i have to use MTTY again... can this be the sign of my mobile nearing death?
Hi,
if you run XP and you have Problems to connect to USB try following:
1. Launch ActiveSync on PC
2. Go to connection settings
3. Uncheck the Allow USB Connection
4. bring the device to bootloader.
5. Now, run mtty ...
... try again to switch from COM1 to USB and follow the instructions of perfect post 3
Hope it helps ... Kgerry
i must say this is the reason i got my old rom working and stuck with it without wanting to upgrade. this happened to me, and for about 4 days or more the phone kept crashing and needing a hard reset. even changing roms or reloading the same rom didnt fix.
i tried the MTTY thing and it was difficult to get going.
i personally really appreciate writing all this up, because now i will probably go and try another rom, with this thread in the back of my mind if things start acting up.
so thanks!
Start Windows without Digitally signed Driver Check... or sumthing like that...
This is only if u have problems with the x64 driver... like i did...
BTW... u made a beautiful how-to man. Great job!
Finally I've found the solution! I'm sorry for wasting your time, but I want to thank you for all. Happy new year!
works great for me using xp virtual pc on windows 7 ultimate good work