Yeah, looks like Official 10.1.0 just launched. For me, with the latest Radio/TZ (F1 firmware) Camera does not work on the Official 10.1.0, but it works fine in last nights nightly. Wonder why...
[OFFICIAL]CM10.1.3 Release for D2VZW GSIII (OP updated 9/24/13)
- Thread starter Restola
- Start date
-
- Tags
- development
Yeah, looks like Official 10.1.0 just launched. For me, with the latest Radio/TZ (F1 firmware) Camera does not work on the Official 10.1.0, but it works fine in last nights nightly. Wonder why...
Stable and nightlies are on different branches. Before releasing a "stable" build there needs to be a code freeze. You can't make changes every night and call it a stable build the next day. I bet there weren't many changes between rc5 and cm10.1 stable release.
Sent from my SCH-I535 using xda app-developers app
On the MB1 baseband. Dirty flash from 6/24 nightly to official release. All is working including camera. One small bug, when I switch from back to front camera, the image is stretched like a fun house mirror. If I exit and go back into the camera it looks fine.
Sent from my SCH-I535 using Tapatalk 2
Sent from my SCH-I535 using Tapatalk 2
I've noticed this in other AOSP roms as well. It seems the different focal lengths of the two cameras aren't accounted for when switching between the two.
Is the quiet microphone issue for recording fixed in 10.1.0?
Sent from my SCH-I535 using xda app-developers app
Sent from my SCH-I535 using xda app-developers app
If you are referring to low mic volume in the camcorder, it will likely never be fixed. There's been at least one open jira ticket since January.
Last edited:
I also tried with the MB1 radios, the main issue for me is that the FiOS Mobile App freezes after ten minutes of play, this also happens with the MF1 radios "this has been an issue going back to RC4", and the camera has a slight delay after pressing the shutter button. There is no problem with the stock 4.1.2 Verizon ROM and VRBMF1 radios, everything works fine.
Quick and odd question... Can anyone confirm if Accuweather is working for them under the latest ROM? The app not the web site?
Neither the official nightly or stable release has it yet. The next nightly will though.
Why wont the rom Boot? any ideas on that? other custom rom boots fine, this one is stuck on the Cyanogen screen :/
Redownload it.. You may have a bad download
Sent from my SCH-I535 using Tapatalk 4 Beta
Going to be rolling out 10.1.0.1 soon
Will have camera fixed with latest firmware (VRBMF1)
Make sure you are running that firmware if you are updating.
http://invisiblek.org/sch-i535/firmware/d2vzw_VRBMF1_firmware.zip
Sorry about the botched stable release
Will have camera fixed with latest firmware (VRBMF1)
Make sure you are running that firmware if you are updating.
http://invisiblek.org/sch-i535/firmware/d2vzw_VRBMF1_firmware.zip
Sorry about the botched stable release
Similar threads
Top Liked Posts
-
There are no posts matching your filters.
-
51Post development questions/logcats etc here. Post "my data doesn't work" (after reading the OP) in the Q&A thread. The mods don't like the developers thread being filled with these user questions, and it's contrary to the goal of this board.
Read this post from our very helpful moderator if you still have any questions. I'll keep both OPs updated. I try to install every nightly and read all of the 10.1 threads. If anything is missing please PM me.
Q&A thread: http://xdaforums.com/showthread.php?t=2071252
10.1.3 has been released.
As for all recent releases, please make sure you are on the MF1 modem
Cyanogen Mod 10.1.0 Release is now available:
http://get.cm/?device=d2vzw
Huge thanks to the CM devs! Pop on over to http://www.cyanogenmod.org/ and make a donation (mouse over "Community" at the top right then select "Donate to us") if you'd like to help support the CM project!
Anyone looking for mastamoon's build with his tweaks, reverts, and cherrypicks - it was moved to Android Development. Here is the link! http://xdaforums.com/showthread.php?t=2094251
Rooting, flashing, installing roms, following any instructions below, will void your phone's warranty and there is a chance (however small) that you'll screw up and permanently break your phone. Anything you do to your phone in violation of the warranty, insurance, or anything else is at your own risk!
-+-+-+-+-+-+-+-+ OFFICIAL DOWNLOAD LINK -+-+-+-+-+-+-+-+
http://get.cm/?device=d2vzw
-+-+-+-+-+-+-+-+ NIGHTLY CHANGE LOG -+-+-+-+-+-+-+-+
App from invisiblek: https://play.google.com/store/apps/details?id=com.invisiblek.cm.nightlies
Or: http://10.1.cmxlog.com/?device=d2vzw
-+-+-+-+-+-+-+-+ GUIDE ON HOW TO ROOT AND FLASH -+-+-+-+-+-+-+-+
http://xdaforums.com/showthread.php?t=2046439
-+-+-+-+-+-+-+-+ HOW TO BACKUP AND RESTORE YOUR IMEI -+-+-+-+-+-+-+-+
http://xdaforums.com/showthread.php?t=1852255&highlight=nvbackup
-+-+-+-+-+-+-+-+ OFFICIAL GOOGLE+ -+-+-+-+-+-+-+-+
https://plus.google.com/+CyanogenMod/posts
-+-+-+-+-+-+-+-+ OFFICIAL GOOGLE+ COMMUNITY -+-+-+-+-+-+-+-+
https://plus.google.com/communities/107373456059326217974
-+-+-+-+-+-+-+-+ KNOWN / REPORTED ISSUES -+-+-+-+-+-+-+-+
On the 10.1.3 RC: (updated 7/18)
1: Only use the MF1 AIO file available here.
2: If you cycle bluetooth off and on it may get stuck. You need to reboot to resolve the issue.
3: Verizon FIOS app crashes
4: BT headsets don't work with the Skype app
5: If you set up a phone number to include pauses (like your voicemail PIN) the keypad wont register any other touches during that call.
Many other problems are fixed by simply re-flashing the same rom file over itself.
Please PM repeatable issues from the release to me. Post a logcat in the developer thread or a JIRA ticket if you expect it to get fixed.
-+-+-+-+-+-+-+-+ SPECIAL NOTES -+-+-+-+-+-+-+-+
1. To enable Developer Options: Menu > Settings > About Phone. Tap build number 7 times to unlock Developer Options
2. Photosphere: This feature is not offered on non-nexus devices
3. There are a lot of questions about how CM10.1 moves your files to sdcard/0/ folder. This is to support multi-users. If you flash back and forth between a non-4.2 ROM and CM10.1 (which is 4.2) you'll end up with sdcard/0/0/..etc since the upgrade to 10.1 moves your folders into a new /0/. You can safely move your files out of /0/ back to your sdcard if you're on CM10, or back to the first /0 folder if you're on CM10.1.
4. Don't update from CM10 to CM10.1 using the built-in cmupdater. Update in recovery for the first flash from CM10 to 10.1. Once on 10.1 you can use cmupdater.
-+-+-+-+-+-+-+-+ INSTALLATION NOTES -+-+-+-+-+-+-+-+
- CM can be flashed using CWM or TWRP. Only use the latest TWRP or CWM!
- When you install CM10.1 your data will be moved to a new folder /0/ (this is to support multi-users).
- Make sure you have the latest CWM or TWRP installed so that your recovery isn't confused by the new location of your backups. Official TWRP d2vzw or Latest CWM (scroll down to Samsung Galaxy S3 (Verizon))
- GAPPS is not included in any CM download. You must flash a gapps zip if coming from another rom or when starting with a clean install. You do not need to flash gapps when 'dirty flashing' over a previous CM install. Download gapps here.
- According to Cyanogen it is possible to flash CM10.1 over top of an existing CM10 installation. It is generally recommended to do a clean install if you run into any issues.
- Always make a backup before you try a dirty flash or upgrade to CM10.1.
-+-+-+-+-+-+-+-+ HOW TO INSTALL OVER CM10 -+-+-+-+-+-+-+-+
- Consider backing up your IMEI if you haven't already (link)
- If you use a lockscreen pattern disable it
- Flash the latest CWM or Official TWRP d2vzw
- Download a CM10.1 rom (nightly or unofficial) to your sd card
- Download the latest gapps from goo to your sd card
- Reboot into recovery
- Make a backup
- Wipe cache and dalvik (if you want)
- Install CM10.1 zip
- Install gapps
- Reboot
- After your phone boots go into Menu > Settings > Apps. Under "All" find "Clock", open it, and click "Clear Data"
-+-+-+-+-+-+-+-+ HOW TO INSTALL FROM ANY ROM OTHER THAN CM -+-+-+-+-+-+-+-+
- Consider backing up your IMEI if you haven't already (link)
- Flash the latest CWM or Official TWRP d2vzw
- Download a CM10.1 rom (nightly or unofficial) to your sd card
- Download the latest gapps from goo to your sd card
- Use an app like Titanium Backup or Mybackup Pro to backup your apps (if you want)
- Use an app like SMS Backup+ to backup your text messages and call log (if you want)
- Reboot into recovery
- Make a backup
- Wipe cache and dalvik (if you want)
- Wipe Data/Factory Reset/System
- Install CM10.1 zip
- Install gapps
- Reboot
- Reinstall Titanium Backup/Mybackup Pro/SMS Backup+ and restore the stuff you have to have, but its better to reinstall things from the market if possible (keep in mind your backups will be located in sdcard/0/) (if you want)
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
I am not a developer, I have no direct association with the CM project, I am just a community member. I will do my best to maintain this thread. Please PM me with any OP suggestions!29Thread cleaned!
I will tolerate no trash talking of any developer
If you want to confront Mr. Goodman do it on Anthrax where he can defend himself
DO NOT Bring this crap on XDA
Please report posts and do not engage members
I promise my intentions are only for mutual respect of both sites and will deal with instigators severely!
Thank you for your cooperation
Friendly Neighborhood Moderator26I Fixing Data
If you flashed a CM10.1 nightly and are stuck at roaming/activating or don't have data, try any of the following (in order of simplicity):
If none of those work this will work for sure:
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Fixing GPS
-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Unofficial CM10.1
(I know several people have posted these, I looked quickly and only found mastamoon's which is also what I am running, I'll happily post more here if I find them).
25CLOSED FOR CLEANING
BTW, Those of you who report these kind of threads you should heed the rules too...
This thread has been repeatdly reported... Therefore I will continually monitor it and infract and delete ALL posts non-development related... I already warned everyone here: http://xdaforums.com/showpost.php?p=35887882&postcount=680 and I asked NICELY.
If you DO NOT know what the fifference between a development question and non-development question is you probably shouldn't post in this thread.... LAST WARNING...
VeNuM
Update, I cleaned a couple of pages, but theres just to much to purge... If your post was deleted this is YOUR CLUE that it is NON-Development related.
1. Stop asking questions here (its not the place. Go to Q and A)
2. Stop posting what works and doesn't work here (General is for this and point 3 below)
3. If you have issues stop posting here without a logcat (its useless and doesnt help the developer fix ANYTHING)
4. The op has all your answers in the first to posts. Go there to find them. If you can't find it go somewhere else.
5. Please read this: http://xdaforums.com/showpost.php?p=9227274&postcount=1 it will help you understand how to give CONSTRUCTIVE feedback. Its also in my signature.
6. Another good thread to read: http://xdaforums.com/announcement.php?a=81 please pay particular attention to number 1, 2.5, 2.6 and 15...
This will remain closed for a short time to let what I've written SINK in...
24
ROFL
"The farthest thing from stable" (sorry just had to requote that)
ROFL (sorry just had to reiterate that)
Let's hear what's not so stable about it. Let's also see some logs of errors. If you don't provide either, you don't belong in this thread.
Please go to the aokp thread and let them know how much you love their rom. Posts like these have no business in this or any development thread.
New posts
-
Redmi note 9 unsuccessful fw flash?- Latest: Clark Joseph Kent
