Here is the CWM 6.0.3.3 for Lava Iris 504Q
Requirements:
1. Sp Flash Tool
2. Recovery.img
3. MT6589_Android_scatter_emmc.txt (only use this one. it is modified.)
Very Easy & safe way to FLASH CWM RECOVERY Without having PC
steps:->
1. Downlaod CWM Recovery extract it and copy recovery.img only to root of your SD Cards
{ i.e. sdcard/recovery.img or sdcard2/recovery.img }
2: download Mobile Uncle Tools for MTK http://d-h.st/yco and install it as normal apps
3. Now open Mobile Uncle Tools apps you recently installed.
4. grant Superuser permissions
5. There click on recovery update menu
6. Then click on the recovery image name of ‘ recovery.img ’
7. Let the app install the recovery. after that apps ask you for reboot your device in to recovery?. press yes
Download: CWM 6.0.3.3 for Lava Iris 504Q
http://d-h.st/nIR
Download: Sp Flash Tools For Mediatek phones
http://mtk2000.ucoz.ru/down7/FT3.13.04.rar
Download: MT6589_Android_scatter_emmc.txt
http://d-h.st/Paz
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone http://xdaforums.com/atta...0&d=1373524210
2. Copy recovery.img and scatter file in new same folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, uncheck all others. (will be checked auto)
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
8. Put Battery and Connect usb to your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
9. After the process completes, a green ring will appear on your device signalling that the process was successful.
10.Disconnect your phone.
Thats all
Press volume Up and Power same time to get in to CWM
Credits
THL W8- Base Recovery
XDA
Requirements:
1. Sp Flash Tool
2. Recovery.img
3. MT6589_Android_scatter_emmc.txt (only use this one. it is modified.)
Very Easy & safe way to FLASH CWM RECOVERY Without having PC
steps:->
1. Downlaod CWM Recovery extract it and copy recovery.img only to root of your SD Cards
{ i.e. sdcard/recovery.img or sdcard2/recovery.img }
2: download Mobile Uncle Tools for MTK http://d-h.st/yco and install it as normal apps
3. Now open Mobile Uncle Tools apps you recently installed.
4. grant Superuser permissions
5. There click on recovery update menu
6. Then click on the recovery image name of ‘ recovery.img ’
7. Let the app install the recovery. after that apps ask you for reboot your device in to recovery?. press yes
Download: CWM 6.0.3.3 for Lava Iris 504Q
http://d-h.st/nIR
Download: Sp Flash Tools For Mediatek phones
http://mtk2000.ucoz.ru/down7/FT3.13.04.rar
Download: MT6589_Android_scatter_emmc.txt
http://d-h.st/Paz
Instructions for flashing using SP Flash Tools:
1. Install drivers for your phone http://xdaforums.com/atta...0&d=1373524210
2. Copy recovery.img and scatter file in new same folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, uncheck all others. (will be checked auto)
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
8. Put Battery and Connect usb to your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
9. After the process completes, a green ring will appear on your device signalling that the process was successful.
10.Disconnect your phone.
Thats all
Press volume Up and Power same time to get in to CWM
Credits
THL W8- Base Recovery
XDA
Last edited:
