Tried Installing Titoo Mod V3 and it boots and Optimizes 248 apps and then reboots and optimizes over and over
[N7100 4.3]N7100 XXUEMJ2_XXUEMJ2_LBEMJ2 PreRooted-Deodexed
- Thread starter dr.ketan
- Start date
Big Huge Padlock Background
As title says, it boots just fine but when i mod it with v2 remove knox samsung hubs n then add transparent bar with data speeds its reboots updates apps reboots updates app again again again
hmm trying figure whats going on back to stack guna flash 1 thing at a time and then check
As title says, it boots just fine but when i mod it with v2 remove knox samsung hubs n then add transparent bar with data speeds its reboots updates apps reboots updates app again again again
hmm trying figure whats going on back to stack guna flash 1 thing at a time and then check
+10000
We will update the mod shortly. For now I don't recommend to flash v3 after MJ2...
Sent from my GT-N7100 using Tapatalk
this new release MJ2 contains TEE (trusted execution environmen) by MobiCore !! in tz.bin in BL provided here http://d-h.st/Bhz via OP .
more info here :
http://www.sensepost.com/blog/9114.html
source code here :
https://code.google.com/p/tee-mobicore-driver/
i hope this may help DEV's/Modders to crack this ...
more info here :
http://www.sensepost.com/blog/9114.html
source code here :
https://code.google.com/p/tee-mobicore-driver/
i hope this may help DEV's/Modders to crack this ...
Dirty flashed this ROM and also flashed my magazine fix and seems to be ok soo far...cant wait for Note 3 apps 
Google chrome not opening pages after update. Anyone facing similar problem?
Sent from my GT-N7100 using xda premium
Sent from my GT-N7100 using xda premium
Well ..I am running the other Dr. Ketan's rom (MI6) with all GNote3 goodies / fixes and it's veeeerrrry smooth.
Can this one get any smoother ?
.
Can this one get any smoother ?
.
Anyone check Google Play Market ? It's very very slow
Very fast 4 me..
Root Issues
If i flash stock. Knox blocks SuperSU and if i remove knox, Root just dont work any help will greatly be appreciated
If i flash stock. Knox blocks SuperSU and if i remove knox, Root just dont work any help will greatly be appreciated
Similar threads
- Locked
Top Liked Posts
-
There are no posts matching your filters.
-
85MUST READ BEFORE PROCEED
- This ROM is AP N7100 XXUEMJ2 CP XXUEMJ2 CSC LBEMJ2 and beleved to be PreOfficial
- This ROM have KNOX security effect on bootloader
- I have flashed this ROM with bootloader and even after that I was able to downgrade MG1 ROM as well reflash this ROM again.
- Pre and post flashing EFS backup highly recommended
- This ROM have bootloader and you have to flash separately (Edit : Now you can use this ROM without bootloader too, read installation instruction)
- Recommend to wipe data (factory reset) before flashing ROM
- No one here on XDA is responsible for any bad effect on your device, You are flashing this at your own risk.
Installation Instruction
- Download Prerooted,Deodexed,Zip aligned N7100XXEMJ2 Here Direct MIRROR (Thanks to @MojoManagement ) here is other MIRROR (thank to @kunals.shah for mirror)
- Download Philz recovery if you don't have already. (you can use other but I have tested this one only)
- Copy ROM zip file to SD card and flash it with CWM.
- After Installation of this ROM, you want have WIFI working, You have to Download This Patch and extract to get patch.tar.md5 and flash with PDA tab of Odin to get wifi working. (remember this patch I have tested on MJ2 and using on other ROM may cause serious issue.)
PS : Who have already flashed bootloader and want to get rid of bootloader follow this steps
- Downgrade to 4.1.2 (I have tested MG1 My prerooted)
- Flash Philz latest recovery
- Flash MJ2 from above said link
- Flash above said patch
- Reboot normally
Special Notes
- SuperSu zp won't work to root this ROM, though you need not to do it, as This rom is already prerooted.
- If you restore app with Titanium backup, many of applications may not work, but need not to worry, follow this to make it work.
Install terminal emulator from Play store. open it, execute superSu permission and follow below said command
After this you can close terminal and you will have working app which you have restored with titanium.Code:su restorecon -R -v /data/data
Remember you have to follow this everytime you restore data from titanium backup.
To All My Dr.Ketan ROM users, If you can't hold your horse, proceed with this and you will be able to flash my update based on this ROM most probable without wipe, Can't promise but may be before week end.
Enjoy latest preofficial ROM20Ok guys here breaking your endless waiting
Still I like to say sorry because I couldn't give you the way I wanted, but still you will be happy to hear facts.
- Breaking the myth by saying - ' You can restore to MG1 prerooted (That I have tested 5 times so mentioning) even though you have flashe MJ2 bootloader
- After downgrading even you can Reset counter using Triangle away.
- I have made a patch which you can use to flash instead of bootloader, will allow you to use MJ2 with wifi working.
- Again you can Downgrade anytime and reset counter.
- What I couldn't give you.
- Tar.md5 that can be flashed directly
- My patch itself may raise counter
- You can't reset counter on MJ2
-Don't push me to release patch, I will still use device for 24 hrs before release.
-Once there will be release, Bootloader link will be replaced by Patch link. and who have already flashed MJ2 have to start from scratch.
This patch is only for MJ2 and I don't recommend to use on MJ51212
+10000
We will update the mod shortly. For now I don't recommend to flash v3 after MJ2...
Sent from my GT-N7100 using Tapatalk
