reading from the posts, is it safe to assume that the old wallet (v 1.6 R96-v16) still works? i tried the other day and it didn't work but i think i derped the process. i don't want to have to update if i don't need to.
Does anyone have the old apk of wallet that doesn't include the old Xposed framework apk. I'm running hyperdrive 10 and it includes xposed. I'm trying to install the old wallet but whenever I flask the last night in the op., my xposed gets jacked and nfc doesn't work.
Sent from my SCH-I545 using Tapatalk
Open the zip on a PC in WinRar and delete the Xposed installer within.
I also had the same behavior, NFC not working with the downgraded Wallet on TW. I never did figure it out either. Tried all sorts of combinations too, hybrid new/old, never could downgrade.
Sent from my SCH-I545 using Tapatalk 2
Thanks for the tip. But if the old wallet apk breaks nfc then it's a bit pointless. New wallet apk does not seem to work when running elite or ktoonz kernel, both which allow for Smart features to work properly. Not sure why, but new wallet apk apparently works if running stock optimized kernel.
Sent from my SCH-I545 using Tapatalk
Is it the old wallet apk that is borking the nfc or is it that the zip from the OP also includes an older version of the exposed installer that's not compatible with 4.3 roms?
It's the apk that breaks nfc..... I'm not on a 4.3 rom. I'm on hyperdrive 10. 2 which is 4.2.2 based. Hyperdrive comes with xposed. The old apk would just flash the older xposed framework which can easily be updated from the download section of the framework. It's when I flash the zip nfc breaks. I cannot figure it out. The old apk worked fine on hyperdrive 9.1, then 10. Breaks on 10.1 and 10.2. The new apk of Google wallet. Sets up fine, but the transaction won't go through. Really hoping someone can help me with this issue as no one has been able to help for either old or new apk.
Sent from my SCH-I545 using Tapatalk
Do a No-Wipe install of the stock firmware. Search is your friend.
The stock install will put everything back that was modified.
A hard reset won't fix software/libraries, etc that have been moved or modified.
Is it possible to flash a stock rom with a locked bootloader.I'm running I545VRUEMK2. I've tried to use ODIN and I keep getting an error something having to do with MAGICCODE. I've been reading that means it's locked.
1. Make sure you have no Google Wallet pre-installed, or if you do, reset data on it
2. Once you have reset the data, go to the Wallet app in your Application Manager
3. Select to "Clear Cache", then to "Clear Data"
4. If you see "Uninstall Updates", select that button, but if you see "Disable" button leave it alone
5. Using a root explorer and text editor, change build.prop lines to correspond to this
6. Keep an old version as a backupCode:ro.product.model=Galaxy Nexus ro.product.name=yakju ro.product.device=maguro
7. Copy the TouchWiz or AOSP zip file for the mod to your phone/SD Card
8. Reboot into your recovery and flash the Google Wallet mod
9. Boot back into the OS and open Xposed Installer app (should be installed after flash)
10. Select "Install/Update" and allow root access if it asks
11. Reboot your device
12. Download and install Paul's Xposed Wallet apk
13. Launch Xposed Installer app again and go to the "Modules" tab
14. Enable the module by checking the checkbox for it
15. Reboot your device again
16. Now open Google Wallet and setup everything as needed (PIN/Security/Cards, etc...)
17. After it is all setup and working, change your modified build.prop back to ONE of the below
Verizon Galaxy S4
Code:ro.product.model=SCH-I545 ro.product.name=jfltevzw ro.product.device=jfltevzw
AT&T Galaxy S4
Code:ro.product.model=SGH-I337 ro.product.name=jflteatt ro.product.device=jflteatt
T-Mobile Galaxy S4
Code:ro.product.model=SGH-M919 ro.product.name=jfltetmo ro.product.device=jfltetmo
Sprint Galaxy S4
18. Reboot your phone normally one last time and you will be all setCode:ro.product.model=SPH-L720 ro.product.name=jfltespr ro.product.device=jfltespr
1. Open Google Wallet
2. Press the Menu key on your device
3. Select "Settings"
4. Select "Reset Google Wallet app"
5. Select "Reset" button
6. Flash your new ROM and/or wipe as needed
7. Follow "How to Apply Mod" directions again from the beginning
1. Follow "How to Apply Mod" steps #5 and 6
2. Reboot your device
3. Open the Play Store and update Google Wallet
4. Open Google Wallet and test everything is working
5. If all is good, follow "How to Apply Mod" steps #17
6. Reboot your device again and confirm everything still working
Woww dude.. Basically you took my patched fix and renamed it to Verizon and pretty much jacked my instructions for method A and didn't even give the slightest bit of thanks on your OP.. that's wrong.... Then in my MAIN thread, you told vz users to post here instead since this is a Verizon forum and to leave the T-mobile talk there..
News flash, the patch is the same for all variants, all derived from sprint.. It doesn't matter if you have tmo, verizon, or att, the fix will work for all carriers..
Not to be a prick but this is kinda messed up
Sent from my SGH-M919 using Tapatalk 2
Is it the old wallet apk that is borking the nfc or is it that the zip from the OP also includes an older version of the exposed installer that's not compatible with 4.3 roms?