Originally Posted by droid-devz
Have you tried flashing STOVK V2 ICS.
stock ICS V2 have a sp tool included in it. use that sp tool and flash stock ICS V2.
also if you have formatted everything using sp tool, your imei and Wifi address are gone, they can be solved later.
for first you flash ICS ve2 using download option.
I have downloaded the stock v2 today and tried it WITH DOWNLOAD OPTION
still the same error. S_DL_PMT_ERR_NO_SPACE(5069)
When tried with firmware upgrade option
i get this error: BROM ERROR : S_PART_NO_VALID_TABLE (1037)
I have tried this stock previously also..
Some more info about my device when I check the memory test in sp flash tool this is the output error : BROM ERROR : S_DA_SDMMC_WRITE_FAILED (3149)
THIS IS THE OUTPUT:
=============== Memory Detection Report ===============
Size = 0x00020000 (128KB)
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
ERROR: NAND Flash was not detected!
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ RAM Test ============
Data Bus Test :
Address Bus Test :
RAM Pattern Test :
Increment/Decrement Test :
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):