[ROM][UNOFFICIAL][ CyanogenMod 10.1 - ONLY For Unlocked Firmware ][Update 23/09/2014]

Search This thread

surdu_petru

Recognized Contributor
Feb 3, 2010
7,535
23,746
Paris
Hello to everyone !




XdNQPoH.png





Huawei Ascend P6


STATE - Stable version !



Unlocked Firmware : Android JellyBean 4.2.2 !





About :
  • builded from the last updated CyanogenMod 10.1 source ;
  • build safe to flash only if you follow the steps to Installation !
  • Not Working :
    • video camera working, but still there are some issues ;
    • H/W video decoder ;
    • settings/battery usage data ;

Changelog :
  • fixed Wi-Fi hostpot ;
  • custom ramdisk !
  • CPU Mode Switch on Advanced settings ;
  • enabled Switch Storage !
  • fix brightness issue !
  • enabled acceleratord !
  • enabled bluetooth audio a2dp profile ;
  • the whole base updated to B120 ;
  • POWER MANAGER with : Powersave, Normal & Performance Profiles ;
  • clean, fast & stable version ;
  • enabled stock aosp camera !
  • video camera working with some issues ! ( will be fixed soon )
  • HD video player working also on YouTube/Browser !
  • H/W video decoder enabled !
  • 23/09/2014
    • enbale Doly Digital Plus ;
    • added Stock Huawei Camera & Gallery ;
    • added Gloves Mode Switch ;
    • fix HDR Mode ;
    • fix Camera Video Recording ;


Downloads :


Installation :
  • make sure your device was already Unlocked !
  • root not require !
  • you must have already installed TWRP Recovery R03.1 !
  • copy cm build & gapps on your external sdcard !
  • put your device in recovery mod ;
  • Wipe -> Advanced Wipe -> select : Dalvik Cache, System, Cache, Cust & Data ! ( equivalent to "Clean Install" )
  • Swipe to Wipe ;
  • Install -> select : Storage : External Storage !
  • select cm-10.1-rom
  • Add More Zips
  • select gapps
  • Swipe to Confirm Flash !
  • Wipe cache/dalvik !
  • Reboot System !
  • Enjoy ...

If Gmail or other gapps cannot update from PlayStore, please navigate to Settings -> Apps -> search your app -> Clear data ! Now please try again to update !



Source :


Credit :



Screenshots :

Screenshot_2013_12_29_16_40_05.png



Thank you very much to all donors - ! This helps to maintain and continue this project !


regards,
Surdu Petru
 
Last edited:

surdu_petru

Recognized Contributor
Feb 3, 2010
7,535
23,746
Paris
Older versions CM10.1 for Huawei Ascend P6


Test version : 26/12/2013 !
About :
  • builded from the last updated CyanogenMod 10.1 source ;
  • build safe to test only if you follow the steps to Installation !
  • Not Working :
    • sound ;
    • camera ;
    • gps ;
    • maybe some other small stuff


Downloads :




Beta version : 29/12/2013 !

About :
  • builded from the last updated CyanogenMod 10.1 source ;
  • build safe to test only if you follow the steps to Installation !
  • Not Working :
    • camera ;
    • gps ;
    • maybe some other small stuff :
      • audio a2dp ;
      • USB mass storage ;

Changelog :
  • fixed browser issue ;
  • fixed external sdcard issue ;
  • improved wifi ;
  • enabled sound ;
  • fixed DSP fc ;
  • fixed volume up-down issue ;
  • added FmRadio - not working yet !


Downloads :



 
Last edited:

husen4u

Senior Member
Feb 17, 2012
1,185
1,512
Kuwait
Thanks a lot for awesome work. We are sure you will fix all bugs soon. Thanks again. Keep it up

Sent from my P6-U06 using xda app-developers app
 
  • Like
Reactions: surdu_petru

euromusic

Senior Member
Nov 6, 2007
117
43
Berlin
Android Wear
Hey, I tested this, really liked seeing clean Android on our device :)
I see a lot of little bugs which, I hope, will be fixed in due time.
Great work and keep on the good stuff!
 

googgiggs

Senior Member
Sep 13, 2011
87
21
Bangkok
It's good for us to have you in our forum. hehehe ;)

Hope this could be a good chance to develop Ascend Mate's CM rom as well.

Sent from my HUAWEI MT1-U06 using xda app-developers app
 

PulseDroid

Senior Member
Jan 7, 2012
2,525
2,436
24
www.pulsedroid.com
so this is not emulated android?
The P6 was never emulated. Ever.

Goldfish is a script on every single Android, take any other Android, and you'll see.

The thing giving poor performance mostly is the kernel, which in this case is still stock with a few tweaks, it'll be faster as the ROM is lighter 188MB < +/- 1GB. Also the mods to the kernel will give it improved speed but still not full potential.

The P6 Development has started to take off, give some time and you'll have a great device.
 
  • Like
Reactions: ReDXfiRe

AshRoller

Senior Member
Nov 18, 2013
239
186
Magelang
www.linuxku.com
From what I gathered, the emulated Android was not a proven theory. Seeing the recovery working native also makes it look like it is not really emulated. So super good news :)

so this is not emulated android?

the emulated theory was created by someone who have delusion about P6. no base at all.




@surdu_petru or anyone that use cm-10.1 ROM

can you provide me log cat and kmesg (when you use camera, music player or anything related to bugs) and make sure you're use verbose mode.


Thanks,
Best Regards

Sent from my GT-i9100 using Tapatalk
 

surdu_petru

Recognized Contributor
Feb 3, 2010
7,535
23,746
Paris
the emulated theory was created by someone who have delusion about P6. no base at all.




@surdu_petru or anyone that use cm-10.1 ROM

can you provide me log cat and kmesg (when you use camera, music player or anything related to bugs) and make sure you're use verbose mode.


Thanks,
Best Regards

Sent from my GT-i9100 using Tapatalk


Hi !

Here is a part of logcat on boot ( it seems audio.primary module is not loaded ! )

*********************
I/mediaserver( 135): ServiceManager: 0x40b80ee8
I/AudioFlinger( 135): Using default 3000 mSec as standby time.
I/CameraService( 135): CameraService started (pid=135)
E/CameraHalInterface( 135): could not dlopen libcamera_core.so: Cannot load library: soinfo_relocate(linker.cpp:1013): cannot locate symbol "_ZN18SkJPEGImageEncoder8onEncodeEP9SkWStreamRK8SkBitmapi" referenced by "libcamera_core.so"...
I/AudioPolicyManagerBase( 135): loadAudioPolicyConfig() loaded /system/etc/audio_policy.conf
W/AudioPolicyManagerBase( 135): could not open HW module primary
W/AudioPolicyManagerBase( 135): could not open HW module a2dp
W/AudioPolicyManagerBase( 135): could not open HW module usb
E/AudioPolicyManagerBase( 135): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 135): Failed to open primary output
E/AudioPolicyManagerBase( 135): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 135): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyService( 135): couldn't init_check the audio policy (No such device)
********************

It is because I kept stock cm libaudioflinger.so !

If libaudioflinger.so is changed with stock Huawei firmware , audio.primary is loaded by device cannot boot cause :

*****************
W/AudioSystem( 718): AudioPolicyService not published, waiting...
I/ServiceManager( 718): Waiting for service media.player...
I/ServiceManager( 718): Waiting for service media.audio_policy...
I/ServiceManager( 718): Waiting for service media.player...
I/ServiceManager( 718): Waiting for service media.audio_policy...
W/IMediaDeathNotifier( 718): Media player service not published, waiting...
I/ServiceManager( 718): Waiting for service media.audio_policy...
I/ServiceManager( 718): Waiting for service media.player...
I/ServiceManager( 718): Waiting for service media.audio_policy...
I/ServiceManager( 718): Waiting for service media.player...
I/ServiceManager( 718): Waiting for service media.audio_policy...
****************

Update : it seems also libaudioflinger.so ( stock Huawei ) cannot be loaded cause mediaserver say :

root@android:/ # exec /system/xbin/su -c /system/bin/mediaserver
soinfo_link_image(linker.cpp:1673): could not load library "libaudioflinger.so" needed by "/system/bin/mediaserver"; caused by soinfo_relocate(linker.cpp:1013): cannot locate symbol "_ZN7android11AudioSystem11setFmVolumeEf" referenced by "libaudioflinger.so"...CANNOT LINK EXECUTABLE



Thanks !
 
Last edited:

surdu_petru

Recognized Contributor
Feb 3, 2010
7,535
23,746
Paris
Good news! step by step all will do.

What is the most important that remains to be done ??


###

The most important thing that we need to enable is : sound ! Camera & gps can be done later !

Looking also on Honor2 , cm 10.1 by @kholk, I can not managed to enable sound, cause is there no source code for his cm10.1 !

He has already modified some standard cm librarys , I think was added or removed some dependency, but we can not know what was done , because code source was not pushed to github !
 
  • Like
Reactions: neodante

Top Liked Posts

  • There are no posts matching your filters.
  • 66
    Hello to everyone !




    XdNQPoH.png





    Huawei Ascend P6


    STATE - Stable version !



    Unlocked Firmware : Android JellyBean 4.2.2 !





    About :
    • builded from the last updated CyanogenMod 10.1 source ;
    • build safe to flash only if you follow the steps to Installation !
    • Not Working :
      • video camera working, but still there are some issues ;
      • H/W video decoder ;
      • settings/battery usage data ;

    Changelog :
    • fixed Wi-Fi hostpot ;
    • custom ramdisk !
    • CPU Mode Switch on Advanced settings ;
    • enabled Switch Storage !
    • fix brightness issue !
    • enabled acceleratord !
    • enabled bluetooth audio a2dp profile ;
    • the whole base updated to B120 ;
    • POWER MANAGER with : Powersave, Normal & Performance Profiles ;
    • clean, fast & stable version ;
    • enabled stock aosp camera !
    • video camera working with some issues ! ( will be fixed soon )
    • HD video player working also on YouTube/Browser !
    • H/W video decoder enabled !
    • 23/09/2014
      • enbale Doly Digital Plus ;
      • added Stock Huawei Camera & Gallery ;
      • added Gloves Mode Switch ;
      • fix HDR Mode ;
      • fix Camera Video Recording ;


    Downloads :


    Installation :
    • make sure your device was already Unlocked !
    • root not require !
    • you must have already installed TWRP Recovery R03.1 !
    • copy cm build & gapps on your external sdcard !
    • put your device in recovery mod ;
    • Wipe -> Advanced Wipe -> select : Dalvik Cache, System, Cache, Cust & Data ! ( equivalent to "Clean Install" )
    • Swipe to Wipe ;
    • Install -> select : Storage : External Storage !
    • select cm-10.1-rom
    • Add More Zips
    • select gapps
    • Swipe to Confirm Flash !
    • Wipe cache/dalvik !
    • Reboot System !
    • Enjoy ...

    If Gmail or other gapps cannot update from PlayStore, please navigate to Settings -> Apps -> search your app -> Clear data ! Now please try again to update !



    Source :


    Credit :



    Screenshots :

    Screenshot_2013_12_29_16_40_05.png



    Thank you very much to all donors - ! This helps to maintain and continue this project !


    regards,
    Surdu Petru
    25
    CM11 on P6 !!!

    Hello !

    Finally successfully booted on CM11 :D

    Thanks to @tksla for BOARD_USES_HWCOMPOSER := false on boardconfig.mk

    Screenshot_2014_02_07_10_14_21.png
    Screenshot_2014_02_07_10_14_48.png



    Need to fix some issue, and a new build will be here soon for all !
    22
    Enable Camera !

    Hello !


    Camera working now ....:D

    Front 5.1MP, Back 8MP , Flash OK, FaceUnlock OK ! For moment I cannot managed to enable video camcorder !

    More details and a new update in the next days !



    regards,
    Surdu Petru
    21
    Hello !

    GPS already enabled on CyanogenMod !


    Screenshot_2013_12_30_17_27_36.png



    Need to enable camera and update & clean up device tree on github , before passed to CM 10.2 Android 4.3.1 !


    Wish me luck :highfive:
    18
    Hi !

    Currently I'm working on this rom ...

    Have some issue : volume up & down, sound, video HD , camera & wifi - apart from that everything seems to work well .

    I hope that in a few days to solve a large part of them !