Remove All Ads from XDA

[Q] Chuwi V88

2 posts
Thanks Meter: 0
By RoryG40, Junior Member on 12th January 2014, 08:23 AM
Post Reply Email Thread
Hello, fairly new to android, however loving every minute of it.

Read through most of Oma's posts on the Chuwi V88 for soft bricked due to upgrading to a new rom.

I need some help, as I jumped the gun on installing the upgrade.

My Model is CW0838
My Serial number is V88 16G2131100155

I couldn't find my serial number in the stock firmware section after I had done the deed.

I used the RKAndroid tool followed the instruction to the letter. I let the operation complete. The Chuwi never rebooted just stayed black with back lit screen. So I then unplugged the usb and put in the SDcard with the Nand flash file but nothing. So am I soft bricked or is it not recognizing my screen?

If I plug the usb back in, the computer recognizes the Chuwi as "Found RKAndroid Mass Storage Usb" on the RKAndroidTool v1.37 program.

Any help, or direction to a post that can help me, would be much appreciated.
Hopefully I haven't destroyed my Chuwi.

Thanks from your fellow XDA'er Rory G.
14th January 2014, 06:39 AM |#2  
OP Junior Member
Thanks Meter: 0
Talking Re-read some of Oma's posts.
Weeeeee!!!! Did some re-reading of Oma's posts, and figured out where I screwed up in the process. My Chuwi V88 is up and running again.
Missed replacing the kernal #351 in the installation. Now I know, will not happen again.

Love my new androids, and always will.

Your fellow XDA'er Rory G.
Post Reply Subscribe to Thread


Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes