iGO 8 on HD 2 - Pinch 2 Zoom + Rotation With high resolution mode..

Search This thread
By:
Advanced…
ultraslan

ultraslan

Senior Member
Jul 11, 2009
81
11
İstanbul
Hello friends, I got my HD 2 yesterday.
I tried to install iGO 8 (that was previously installed on my HD) to my HD 2.
When I tried to rotate screen (portrait to landscape or viceversa) by using iGO8/Menu/Settings/Device Sett./Screen , I got a clipped screen. Then with a small modify I got my real Screen Size without clipping and now I can pass from landscape to portrait without any clipping. Now I will explain how I did.
And, you are high resolution mode, it is perfect....

First: I use iGO8 v 8.3.2.93112 , I think that it should work for all 8.3 series.

Step by step:

Before begin: if there is iGO8/save/system.ini file you should delete it, on the first run iGO will compose one for the device :)

A. Pinch To Zoom

A1. Automatic Method (Installing Cab File that insert registry key automatically)
For pinch to zoom, all you should do is install Pinch2Zoom.cab and Reset your device :)

A2. Manual Method (Insert key with a registry editor)
If you want to make it manually, you can make it with a registry editor.
If you do not have one, here is PHM Regedit..
1.Install and Run PHM Regedit
2.Go to (by clicking) HKLM\Software\HTC\TouchGL\VirtualDesktop\WhiteList
3.Click Edit>New Key --- Name it iGO8 (this name is optional)
4.Click the Key you created and Click Edit> New String Value
Write the options Below

Value Name: ProcName
Value Data: iGO8.exe

And click OK, Close Regedit, Reset your device..

Note: You can add many softwares into the whitelist, so you can enable Pinch to zoom on that softwares,
This is How I described for iGO8.exe, only you should know is the name of Exe file that the software runs.

B. Rotation and High Resolution

1. Change Your sys.txt content (backup your old one) with I gave below, (your sys.txt should be only 6 lines below, delete all other lines.)
2. Check inside the ui_igo folder in SDCard/iGO8/data.zip if there is 480_800, 800_480, 240_400, 400_240 folders inside it. (There must be ;-) ) If not you should find one data.zip that I recommend :)
3. Install iGO8 normally (with 2577/Autorun.exe), make your local configurations etc. and exit iGO8.
4. Add the lines I gave below into SDCARD/iGO8/save/system.ini
5. Start iGO8 again, if the screen is not clipped, you can change from portrait to landscape. I tried it and succeed.


So my sys.txt is: (6 lines below)
Code: 
[folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

Lines to add in iGO8/save/system.ini

Code: 
[rawdisplay]
class="portrait"
autoconfig="1"
driver="gdi"
highres="0"

highres="0" line is important for High Resolution mode :)

Happy Navi :)

Note: app="%SDCARD%/iGO8" this line should be modified for the devices that are not WWE. This line is for WWE ROM. %SDCARD% name should be changed for other languages.
 
Last edited:
  • Like
Reactions: mutil
ghale

ghale

Senior Member
Oct 20, 2007
308
30
localhost
Xiaomi 11T Pro
Ok, now the app rotate in a right way, thanks.

But... I've not the hi-res version of the application running, as you can see from the screenshot...

Any help?
 

Attachments

  • snapshot2.jpg
    snapshot2.jpg
    34.1 KB · Views: 5,532
ghale

ghale

Senior Member
Oct 20, 2007
308
30
localhost
Xiaomi 11T Pro
Oh, ok.

I use 8.3.4.102680 and I've this sys.txt content:

Code: 
[device]
type="ALIAS_TOUCH HD"
sdcard_dsk_num=7

[folders]
app="%SDCARD%/iGO8"

[interface]
skin="ui_igo8"
resolution_dir="800_480"
vga=1
screen_x=800
screen_y=480
maxzoom2d=6000000
show_exit=1

[rawdisplay]
autoconfig=1
highres=0
class="landscape"
driver=GDI

[loading]
show_statustext=0
show_progressbar=0
progressbar_x=0
progressbar_y=220

[navigation]
show_current_city=1
show_countrychange=1

In this way I've hires!
 
ultraslan

ultraslan

Senior Member
Jul 11, 2009
81
11
İstanbul
1.backup your sys.txt
2.Create new text file and copy the 6 lines I gave above paste in it. rename txt file to sys.txt and put it in iGO 8 folder.
3.Uninstall iGO8. Remove iGO8 folder from Programfiles (using File Explorer)
4.Delete iGO8/save/system.ini file. (backup old one)
5.Reinstall iGO8 and add 3 lines above into system.ini ..

Try again..
 
ultraslan

ultraslan

Senior Member
Jul 11, 2009
81
11
İstanbul
1.backup your sys.txt
2.Create new text file and copy the 6 lines I gave above paste in it. rename txt file to sys.txt and put it in iGO 8 folder.
3.Uninstall iGO8. Remove iGO8 folder from Programfiles (using File Explorer)
4.Delete iGO8/save/system.ini file. (backup old one)
5.Reinstall iGO8 and add 3 lines above into system.ini ..

Try again..
 
ultraslan

ultraslan

Senior Member
Jul 11, 2009
81
11
İstanbul
Friends now I can put iGO8 from landscape to portrait or viceversa.
And it is in High Resolution mode, Quality is perfect..
All you should do is in the first post..
 
C

czbird

Senior Member
Feb 9, 2006
129
0
tried zoomer already but it is useless with iGo, I've seen a video where the pinch zoom worked, so there must be a way...
 
ultraslan

ultraslan

Senior Member
Jul 11, 2009
81
11
İstanbul
.... I do not now about that.. I should search.
Only the thing I made iGO8.3.X work properly, and can be rotateable by iGO8's settings menu.. And also High resolution.. :)
:) I like iGO8 and Iknow that most of the navigation lovers like iGO8..
 
liviumustata@yahoo.com

liviumustata@yahoo.com

Senior Member
Feb 26, 2008
200
26
Romania
igo from navi panel

if you want to launch igo directly from navi panel: delete copilot folder from program files folder, in igo folder rename igo.exe in copilot.exe and rename the igo folder in copilot
 
You must log in or register to reply here.

Similar threads

skr_xd
Cab Repository for Leo [Upt 8 Mar 10]-- Collection of working softwares/Applications
Replies
207
Views
565K
lohtse
lohtse
smaberg
[REF] [Sense 2.5 tweaks & mods][CABS] Last updated 12/02-2010 -10:20
Replies
964
Views
1M
J
JAAR23
benchbench
whatsapp for windows mobile
Replies
174
Views
774K
D
dgunn1956
M
iGO Primo 1.1 sys.txt
Replies
44
Views
115K
wandel
wandel
smaberg
[REF] [Sense 2.5 tweaks & mods THREAD 2][CABS] [EXT] Last updated 04/04-2010 -19:06
Replies
186
Views
218K
aloysius987
aloysius987

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 1
    ultraslan
    ultraslan
    Hello friends, I got my HD 2 yesterday.
    I tried to install iGO 8 (that was previously installed on my HD) to my HD 2.
    When I tried to rotate screen (portrait to landscape or viceversa) by using iGO8/Menu/Settings/Device Sett./Screen , I got a clipped screen. Then with a small modify I got my real Screen Size without clipping and now I can pass from landscape to portrait without any clipping. Now I will explain how I did.
    And, you are high resolution mode, it is perfect....

    First: I use iGO8 v 8.3.2.93112 , I think that it should work for all 8.3 series.

    Step by step:

    Before begin: if there is iGO8/save/system.ini file you should delete it, on the first run iGO will compose one for the device :)

    A. Pinch To Zoom

    A1. Automatic Method (Installing Cab File that insert registry key automatically)
    For pinch to zoom, all you should do is install Pinch2Zoom.cab and Reset your device :)

    A2. Manual Method (Insert key with a registry editor)
    If you want to make it manually, you can make it with a registry editor.
    If you do not have one, here is PHM Regedit..
    1.Install and Run PHM Regedit
    2.Go to (by clicking) HKLM\Software\HTC\TouchGL\VirtualDesktop\WhiteList
    3.Click Edit>New Key --- Name it iGO8 (this name is optional)
    4.Click the Key you created and Click Edit> New String Value
    Write the options Below

    Value Name: ProcName
    Value Data: iGO8.exe

    And click OK, Close Regedit, Reset your device..

    Note: You can add many softwares into the whitelist, so you can enable Pinch to zoom on that softwares,
    This is How I described for iGO8.exe, only you should know is the name of Exe file that the software runs.

    B. Rotation and High Resolution

    1. Change Your sys.txt content (backup your old one) with I gave below, (your sys.txt should be only 6 lines below, delete all other lines.)
    2. Check inside the ui_igo folder in SDCard/iGO8/data.zip if there is 480_800, 800_480, 240_400, 400_240 folders inside it. (There must be ;-) ) If not you should find one data.zip that I recommend :)
    3. Install iGO8 normally (with 2577/Autorun.exe), make your local configurations etc. and exit iGO8.
    4. Add the lines I gave below into SDCARD/iGO8/save/system.ini
    5. Start iGO8 again, if the screen is not clipped, you can change from portrait to landscape. I tried it and succeed.


    So my sys.txt is: (6 lines below)
    Code: 
    [folders]
app="%SDCARD%/iGO8"

[interface]
maxzoom2d=6000000
show_exit=1

    Lines to add in iGO8/save/system.ini

    Code: 
    [rawdisplay]
class="portrait"
autoconfig="1"
driver="gdi"
highres="0"

    highres="0" line is important for High Resolution mode :)

    Happy Navi :)

    Note: app="%SDCARD%/iGO8" this line should be modified for the devices that are not WWE. This line is for WWE ROM. %SDCARD% name should be changed for other languages.
    View

New posts