Thank you so much for posting this!
Being a HOX+ (US) AT&T 4G LTE owner and devotee, I am truly inspired to attempt this mod.
Will I need to convert power from US to UK?
I will make sure to share pics if it turns out successfully.
KofaSing KoodGarma
http://www.pagone.com
The adapter that comes w/ the dock works with US power in terms of voltage and amps, but you will need a converter/adapter to convert the plug so that it physically fits in a US outlet. You can get these at Radio Shack or other electronics store.
A STANDARD MicroUSB ADAPTER WILL NOT WORK because it will not get enough power. You need something that outputs 9V and 1.67A or the phone can't keep up w/ the charge. The perfect adapter to purchase would be the one for the HTC flyer. I can verify that it works perfectly w/ the dock and US power. Here's a link to one on ebay.
----------------
So this worked on the the US version of the HOX+ on the European dock? I've been searching for a dock with pin charging for a while. Your method looks very simple. From what I gather, the pins only move over (down) the phone for the US version vs Euro version but are in the same orientation? Also a slight padding to go along the long edge in the dock to orient?
Correct???
Thanks
JOHN
Yes, I have the US AT&T 4G LTE version of the HOX+ and purchased the European dock. Your assumption is also correct in that the PINS are only shifted over one space so you just have to drill a hole and physically move the board over one slot (and maybe shave off 1mm of plastic on the bottom of the dock for a perfect fit). It's really not that hard. In fact, the most difficult part is to take it apart and not accidentally disconnect any of the wires.
Last edited: