[ROOT][IOroot] Root your LG G Pro 2 [F350][Woohoo!]

Search This thread
By:
Advanced…
H

hkfriends

Senior Member
Aug 24, 2007
582
149
autoprime said:
what method is this exactly? is there a link somewhere?
Click to expand...
Click to collapse


It is simply to rebuild a kernel (currently can use F350K version v10e boot.bin) TOT

All we need is 2 TOTs
1) make a working TOT for root (inside is the kernel image of F350K v10e)
2) make a correct TOT for current version, e.g. d838


@pcfree already discovered the structure of TOT file
http://xdaforums.com/showthread.php?t=2717934
All we need to calculate the offset location and make sure correct partition address are corrected

By booting with v10e kernel can allow adbd with root access, so we can use your tool to root it first,
then we re-flash the correct kernel back to the mobile.

It is the only solution without loki the bootloader with any customed recovery....
 
Last edited:
kevinngck1

kevinngck1

Senior Member
Aug 4, 2011
381
45
hkfriends said:
It is simply to rebuild a kernel (currently can use F350K version v10e boot.bin) TOT

All we need is 2 TOTs
1) make a working TOT for root (inside is the kernel image of F350K v10e)
2) make a correct TOT for current version, e.g. d838


@pcfree already discovered the structure of TOT file
http://xdaforums.com/showthread.php?t=2717934
All we need to calculate the offset location and make sure correct partition address are corrected

By booting with v10e kernel can allow adbd with root access, so we can use your tool to root it first,
then we re-flash the correct kernel back to the mobile.

It is the only solution without loki the bootloader with any customed recovery....
Click to expand...
Click to collapse

I have f350s tot and dll. Could you help to build the kernel?
 
H

hkfriends

Senior Member
Aug 24, 2007
582
149
kevinngck1 said:
I have f350s tot and dll. Could you help to build the kernel?
Click to expand...
Click to collapse

sure! please PM me and upload to gdrive or baidu

Edit 1: OK I found out a TOT for S (v10e + v10g)


<< I don't take any responsibility for the following procedures. please take extra care on how to flash a TOT file. It may result to brick your mobile phone permanently>>


Note: your warranty will/may be void if you do a rooting to your mobile phone :)


Required:
LG drivers: http://pan.baidu.com/s/1hqiMUbi
LG Flash Tool: http://pan.baidu.com/s/1c06BDuC (remember to overwite the MegaLock.dll to the LGFlashTool directory)

Tutorial on how to use LG Flash Tool
http://xdaforums.com/showthread.php?t=2475045
Chinese: http://pan.baidu.com/s/1gd7R6Jh



!!! BACK UP all your data from /sdcard partition, LG Flash tool will erase /sdcard even though only flash a boot image. While other partitions are safe.




All TOT files are stored in google drive, click the link and then press CTRL + S to download the rar file



KR F350S 32GB
1) Flash f350s_root_kernel.TOT
https://drive.google.com/file/d/0BxC_n8Lmue8vNDNuQkJrTTRDTDQ/edit?usp=sharing

2) root it by IOroot 2.4 (please refer to #1 of this post)

3) Once rooted, you can flash back the S stock kernel

For f350s stock v10e
https://drive.google.com/file/d/0BxC_n8Lmue8vUHpmd0hja0t5ZTA/edit?usp=sharing
or
For f350s stock v10g
https://drive.google.com/file/d/0BxC_n8Lmue8vZC1HTkVlRG9fWEU/edit?usp=sharing


In case of any issue, you can flash back to fully stock rom image

v10e
http://optimusforums.com/threads/g-pro-2-f350s-v10e-tot.11712/

v10g
http://bbs.gfan.com/android-7376941-1-1.html

Good Luck


Edit 2:
HK D838 32GB
d838_root_kernel
https://drive.google.com/file/d/0BxC_n8Lmue8vck8yQ1A1YW1XNjg/edit?usp=sharing
d838_v10a_kernel
https://drive.google.com/file/d/0BxC_n8Lmue8vcUQxUXVZb3hQN1k/edit?usp=sharing
d838_v10b_kernel
https://drive.google.com/file/d/0BxC_n8Lmue8vd29jcDBacHMwTVk/edit?usp=sharing

KR F350K 32GB
f350k_root_kernel_v10e
https://drive.google.com/file/d/0BxC_n8Lmue8vdXJOWjFZUjVlVkk/edit?usp=sharing
f350k_kernel_v10h
https://drive.google.com/file/d/0BxC_n8Lmue8vTmdQMU9vbFRLcDA/edit?usp=sharing
 
Last edited:
  • Like
Reactions: zooka and wolfgart
autoprime

autoprime

Recognized Dev / Inactive Recognized Contributor
Jun 23, 2010
2,630
11,875
hkfriends said:
It is simply to rebuild a kernel (currently can use F350K version v10e boot.bin) TOT

All we need is 2 TOTs
1) make a working TOT for root (inside is the kernel image of F350K v10e)
2) make a correct TOT for current version, e.g. d838


@pcfree already discovered the structure of TOT file
http://xdaforums.com/showthread.php?t=2717934
All we need to calculate the offset location and make sure correct partition address are corrected

By booting with v10e kernel can allow adbd with root access, so we can use your tool to root it first,
then we re-flash the correct kernel back to the mobile.

It is the only solution without loki the bootloader with any customed recovery....
Click to expand...
Click to collapse

cool. thx. was aware of the method prior to this... but didnt know someone posted the info. just wanted to see what they had to say :good:
 
  • Like
Reactions: wolfgart
M

mail2erik

Member
Jul 27, 2010
34
2
Thanks for your work, but the dll file from your gdrive unable to download,
 
Last edited by a moderator:
M

mail2erik

Member
Jul 27, 2010
34
2

Attachments

  • aa.jpg
    aa.jpg
    23.6 KB · Views: 321
W

wchio

Member
Jan 11, 2013
8
0
how come "HK D838 32GB", is it 16GB right???

LG said that 32GB will sell after Easter holiday.
 
Last edited by a moderator:
You must log in or register to reply here.

Similar threads

X
Cyanogenmod 13 for LG G Pro 2 D838, CM14.1
Replies
1K
Views
204K
ciobaneasca
ciobaneasca
Hendrickson
[ROM] CN Mod V2 for F350/S/K/L and D838
Replies
55
Views
53K
mchandu
mchandu
X
TWRP Recovery for LG G Pro 2
Replies
69
Views
60K
rdmtrue
rdmtrue
O
easy root tested on LG G PRO 2 D838
Replies
66
Views
41K
I
inhalt
A
Recovery for LG G pro 2 F350 series tested working .
Replies
32
Views
28K
P
percymama

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 33
    autoprime
    autoprime

    IOroot
    IOroot was originally a Windows script to root the LG G2 on 4.2.2 made by IOMonster... based on the original adb backdoor found by GiantPune and later posted by jcase.
    The script has grown to support various other LG devices on Android 4.0 - 4.4.2... 4.4.2 kk_root.zip by autoprime. Current IOroot25r1 by autoprime.
    Supported devices include LG Optimus G, G2, G3, G Pro, G Pro 2, G Flex and G Pad just to name a few.

    4.4.2 root will NOT work for you if you cannot get into the stock recovery menu w/the "adb reboot recovery" command.
    Check the supported devices list below. You may have to downgrade to 4.2.2 or below and root that instead.
    Or your device may not be supported at all. Again.. check the supported device list below.

    Current Version - IOroot25 refresh 1

    Download IOroot zip, extract and run script to root. ADB must be enabled (USB Debugging ON).
    Click the button below for IOroot device support list, manual and automated root and other info.

    Device Model and Firmware Supported List:


    LG Optimus G - all 4.2.2 and 4.4.2

    LG G2:
    AT&T D800 - D80010d/D80010o/4.4.2
    D801 - TMO(all 4.2.2 // No 4.4.2 support), CLR(all 4.2.2 // 4.4.2 ??), WND(all 4.2.2 // 4.4.2 ??), VTR(all 4.2.2 // 4.4.2 ??)
    D802 - all 4.2.2 and 4.4.2
    D803 - all
    D805 - all
    D806 - all
    F320K - Shipping 4.2.2 ROM/F320K20a/20f // 4.4.2 ??
    F320L - Shipping 4.2.2 ROM/F320L20b/20e // 4.4.2 ??
    F320S - Shipping 4.2.2 ROM/F320S20a/20g // 4.4.2 ??
    Sprint LS980 - All 4.2.2 and 4.4.2
    Verizon VS980 - All 4.2.2 and 4.4.2

    LG G Flex:
    F340 series - All 4.2.2 // 4.4.2 ??
    D950 - All 4.2.2 // No 4.4.2 support
    D955 series - All 4.2.2
    D958 series - All 4.2.2 // No 4.4.2 support
    D959 - All 4.2.2 // No 4.4.2 support
    LS995 - All 4.2.2 and 4.4.2

    LG G Pro - All 4.4.2 Only

    LG G Pro 2:
    F350 series - Shipping ROM // 4.4.2 ??
    D838 - Shipping ROM // 4.4.2 ??

    LG G Pad - 4.4.2 Only

    LG G3
    F400 Series - Shipping ROM


    Manual Root Method:

    Code: 
    [B][SIZE="2"]Windows Drivers:[/SIZE][/B]
[I]Verizon Drivers - [URL="http://bit.ly/1ibRvc3"]HERE[/URL]
Drivers for everyone else - [URL="http://bit.ly/18EPHZN"]HERE[/URL][/I]

[B]4.4.2 Manual Root:[/B]
[SIZE="1"]
Download and extract the latest IOroot.zip
Enable USB Debugging. VZW users must also enable ethernet mode. 
Open terminal/command prompt. windows/linux users: cd into /ioroot folder. mac users cd into /ioroot/mac
(windows users can hold shift key, right click in ioroot folder. Select "[URL="http://www.techsupportalert.com/content/how-open-windows-command-prompt-any-folder.htm"]open command window[/URL]" option.[/SIZE]

[B]1. adb devices[/B]
[B]2. adb reboot recovery[/B]
(when booted in recovery, select: 'apply update from adb' with power button)
[B]3. adb sideload kk_root.zip[/B]

reboot when zip finishes flashing. done.




[B]4.2.2 Manual Root:[/B]
[SIZE="1"]Download and extract the latest IOroot.zip
Enable USB Debugging. VZW users must also enable ethernet mode. 
Open terminal/command prompt. windows/linux users: cd into /ioroot folder. mac users cd into /ioroot/mac
(windows users can hold shift key, right click in ioroot folder. Select "[URL="http://www.techsupportalert.com/content/how-open-windows-command-prompt-any-folder.htm"]open command window[/URL]" option.[/SIZE]

copy/paste commands below.. hitting enter/return after each line. 
Linux/Mac users may have to enter ./ before adb on each line. 
Example: ./adb push g2_security /sdcard/g2_security

[SIZE="1"][B]1:[/B] [B][I]adb devices[/I][/B]
(make sure it sees your device; if "offline" turn on phone/unlock and accept RSA key prompt)
[B]2:[/B] Choose next line based on model and firmware version:
AT&T D80010d (Shipping ROM): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
AT&T D80010o/10q: [B][I]adb push ytiruces_1a_att /sdcard/ytiruces_1a[/I][/B]
KT F320k (Shipping ROM): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
KT F320K20a/20f (KitKat): [B][I]adb push ytiruces_1a_kk /mnt/shell/emulated/0/ytiruces_1a[/I][/B]
LGU F320L (Shipping ROM): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
LGU F320L20b/20e (KitKat): [B][I]adb push ytiruces_1a_kk /mnt/shell/emulated/0/ytiruces_1a[/I][/B]
D802(T) (4.2.2): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
D803 (4.2.2): [B][I]adb push ytiruces_1a_d803 /sdcard/ytiruces_1a[/I][/B]
D805 (4.2.2): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
D806 (4.2.2): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
SKT F320S (Shipping ROM): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
SKT F320S20a/20g (KitKat): [B][I]adb push ytiruces_1a_kk /mnt/shell/emulated/0/ytiruces_1a[/I][/B]
Sprint LS980ZV7/ZV8: [B][I]adb push g2_security_spr /sdcard/g2_security[/I][/B]
Sprint LS980ZVA (OTA): [B][I]adb push ytiruces_1a_ls980 /sdcard/ytiruces_1a[/I][/B]
T-Mobile D80110c (Shipping ROM): [B][I]adb push g2_security /sdcard/g2_security[/I][/B]
T-Mobile D80110g (OTA): [B][I]adb push ytiruces_1a_tmo /sdcard/ytiruces_1a[/I][/B]
Verizon VS98010B (Shipping ROM): [B][I]adb push g2_security_vzw /sdcard/g2_security[/I][/B]
Verizon VS98011A/12B (OTA): [B][I]adb push ytiruces_1a_vzw /sdcard/ytiruces_1a[/I][/B]
Videotron D801 (4.2.2): [B][I]adb push ytiruces_1a_d803 /sdcard/ytiruces_1a[/I][/B]
Wind D801 (4.2.2): [B][I]adb push ytiruces_1a_d803 /sdcard/ytiruces_1a[/I][/B]

F340-Series (4.2.2): [B][I]adb push ytiruces_1a_F340JB /sdcard/ytiruces_1a[/I][/B]
D950 (4.2.2): [B][I]adb push ytiruces_1a_kk /sdcard/ytiruces_1a[/I][/B]
D955-Series (4.2.2): [B][I]adb push ytiruces_1a_kk /sdcard/ytiruces_1a[/I][/B]
D956-Series (4.2.2): [B][I]adb push ytiruces_1a_kk /sdcard/ytiruces_1a[/I][/B]
D958-Series (4.2.2): [B][I]adb push ytiruces_1a_kk /sdcard/ytiruces_1a[/I][/B]
D959 (4.2.2): [B][I]adb push ytiruces_sumtz /sdcard/ytiruces_sumtz[/I][/B]
LS995 (4.2.2): adb push ytiruces_1a_ls995 /sdcard/ytiruces_1a

F350K/L/S (4.4.2): [B][I]adb push ytiruces_1a_kk /sdcard/ytiruces_1a[/I][/B]

[B]********************************************************
This next depends on your computer/phone model...

USB Connection Mode needs to be toggled.
Ways to do this are listed below...

a. Unplug usb cable from phone then re-plug.
b. Toggle USB mode from Charge to MTP back to Charge
c. Toggle USB mode from Ethernet to MTP back to Ethernet (VZW users)
********************************************************[/B]

[B]3:[/B] [B][I]adb shell[/I][/B]
(you should now see a # instead of a $. # = root)
[B]4:[/B] [B][I]exit[/I][/B]
[B]5:[/B] [B][I]adb shell "mount -o remount,rw /system"[/I][/B]
[B]6:[/B] [B][I]adb push su /system/xbin/su[/I][/B]
[B]7:[/B] [B][I]adb push su /system/xbin/daemonsu[/I][/B]
[B]8:[/B] [B][I]adb push install-recovery.sh /system/etc/install-recovery.sh[/I][/B]
[B]9:[/B] [B][I]adb shell "chown 0.0 /system/xbin/su;chmod 06755 /system/xbin/su"[/I][/B]
[B]10:[/B] [B][I]adb shell "chown 0.0 /system/xbin/daemonsu;chmod 06755 /system/xbin/daemonsu"[/I][/B]
[B]11:[/B] [B][I]adb shell "chown 0.2000 /system/etc/install-recovery.sh;chmod 755 /system/etc/install-recovery.sh"[/I][/B]
[B]12:[/B] [B][I]adb shell "sync;mount -o remount,ro /system"[/I][/B]
[B]13:[/B] [B][I]adb install Superuser.apk[/I][/B]

REBOOT AFTER STEP #13
[/SIZE]





v

    Automated .bat/.sh Directions:


    Download latest ioroot.zip. Unzip and run bat/sh. Follow the onscreen instructions.
    4.4.2 is rooted through stock recovery. Once in recovery use volume keys to select "update with adb" then hit the power button... then continue with the script.

    Windows:
    Download and install proper ADB driver. Enable USB Debugging. Double-click on root.bat

    Linux:
    cd into /IOroot/ folder
    chmod +x root.sh
    ./root.sh

    Mac:
    cd into /IOroot/mac/ folder
    chmod +x root.sh
    ./root.sh


    Windows Drivers:
    Verizon Drivers - HERE
    Drivers for everyone else - HERE

    EFS Backup:

    EFS is automatically backed up for all 4.2.2(and below) devices.
    EFS is backed up into the ioroot folder on your computer. If running ioroot on mac.. it'll be in the ioroot/mac folder.
    Store backed up EFS partitions somewhere safe.

    4.4.2 devices will not have automatic EFS backup.
    Use the commands below to backup EFS.
    Code: 
    adb shell
su
dd if=/dev/block/platform/msm_sdcc.1/by-name/modemst1 of=/sdcard/modemst1.img
dd if=/dev/block/platform/msm_sdcc.1/by-name/modemst2 of=/sdcard/modemst2.img

    Not Working?

    If you are on 4.4.2 and cannot get into a stock recovery menu with adb reboot recovery then you CANNOT root 4.4.2 on your device.
    You must downgrade to 4.2.2 with stock tot or kdz, retain root and take OTA updates to 4.4.2
    OR
    downgrade to 4.2.2 and install custom recovery and manually upgrade your way to 4.4.2 by flashing a KK rom + modem.

    Make sure to read all of the scripts on-screen text or you may miss something. Hitting a button when it's not time to do so or not reading everything on screen can cause problems. Make sure the phone is unlocked with the screen on whenever possible as well.

    If the scripts fail for you check out the manual directions further down the page. The manual method is only a few ADB commands and can help if I've messed up in the scripts somewhere... or if the scripts just don't seem to be working for you. Taking it one step at a time manually almost always results in success.

    Still not working?
    I need the output from the 4 ADB commands below along with IOroot version and if it was on Windows/Linux/Mac. Any errors you come across would help as well...
    adb shell "getprop ro.product.model"
    adb shell "getprop ro.build.target_operator"
    adb shell "getprop ro.lge.swversion"
    adb shell "getprop ro.build.fingerprint"

    What's Next?

    Confirm full root with rootchecker. ( @joeykrim )
    Support a great dev by buying the Pro version.

    If you only did the "temp root/adb only root" then you can confirm root by opening adb shell and seeing # instead of $.

    For custom recovery(TWRP/CWM) on 4.2.2 and below run FreeGee ( @Shelnutt2 )
    Check out the FreeGee donate version if you want to support a great dev.

    For custom recovery(TWRP) on 4.4.2 run AutoRec by @Cloudyfa for a safe and easy install.


    IOroot25r1 Download: HERE


    Changelog:

    v25r1: Fixed LG OG EFS backup. Added D802T 4.2.2 support. Script checks for 4.4.2 first. G3 supported.
    v25: Added root for 4.4.2 devices. Now works on most LG 4.4.2 devices. Thanks to @jarari2 for the idea to go through stock recovery.
    v24: added support for G2 D800 10q, G Flex D956 and G Pro 2 F350K/L/S(thanks to @hkfriends for confirming ioroot method still works)
    v23: added support for AT&T G Flex D950 10c.
    v22: added support for TMO D959 G Flex. Tweaked scripts EFS backup... hopefully no more errors.
    v21: added support for Sprint LS980ZVA update. Added EFS backup support.
    v20: added support for all D802/D805/D806. Updated all scripts. Added LG Optimus G and LG G Flex support. SuperSu now installed in /system.
    v19: added support for MORE F320 4.4 firmware. Added Singtel D802 support. Linux/Mac script fixes.
    v18: added support for MORE F320 4.4 firmware. Added Vodafone(VDF) carrier(should work with at least Shipping ROM). Tweaked scripts.
    v17: added F320* 4.4 KitKat root. Added SuperSu.4.4 users must reboot after running root script(mac/linux)
    v16: added TMO 10g root and "SCA" root(D802/D805)
    v15: added ATT 10o root.
    v12: added Verizon 12B root.
    v11: added linux support and Sprint LS980 root(both thanks to @Shelnutt2)


    ​
    y u no hit thanks button?
    ​
    View
    6
    autoprime
    autoprime
    EVERYONE'S root problems may have just been solved today. @geohot has released towelroot to root the att/vzw gs5.
    Well, it works on my LG G2 LS980 on 4.4.2. So TMO D801 4.4.2 users... G Flex 4.4.2 users... G Pro 2 users... anyone else on 4.4.2 or less... you should now have root.

    go to http://towelroot.com - install apk - run app - reboot - install supersu
    be sure to thank geohot.
    View
    6
    autoprime
    autoprime
    ioroot25

    4.4.2 root is here.

    Download HERE

    Changelog:
    v25 - Added root for 4.4.2 devices. Added G Pro 2 D838 support. Thanks to @jarari2 for the idea to go through stock recovery.

    Scripts need testing!! I am 99% sure the method works across all ioroot support devices but I am NOT 100% sure if the script/bat files are perfect.

    Manual method below if you don't wanna use script:
    Code: 
    [SIZE="1"]Download and extract the latest IOroot.zip
Enable USB Debugging. VZW users must also enable ethernet mode. 
Open terminal/command prompt. windows/linux users: cd into /ioroot folder. mac users cd into /ioroot/mac
(windows users can hold shift key, right click in ioroot folder. Select "open command window" option.

copy/paste commands below.. hitting enter/return after each line. [/SIZE]

[B][I]adb devices
adb reboot recovery
adb sideload kk_root.zip[/I][/B]

reboot when zip finishes flashing. done.


    *ATTENTION*
    shucks.. apparently this still wont work with D838. no way to get into the stock recovery.

    ioroot25 will root any LG 4.4.2 phone if it can get into recovery.
    View
    2
    H
    hkfriends
    kevinngck1 said:
    I have f350s tot and dll. Could you help to build the kernel?
    Click to expand...
    Click to collapse

    sure! please PM me and upload to gdrive or baidu

    Edit 1: OK I found out a TOT for S (v10e + v10g)


    << I don't take any responsibility for the following procedures. please take extra care on how to flash a TOT file. It may result to brick your mobile phone permanently>>


    Note: your warranty will/may be void if you do a rooting to your mobile phone :)


    Required:
    LG drivers: http://pan.baidu.com/s/1hqiMUbi
    LG Flash Tool: http://pan.baidu.com/s/1c06BDuC (remember to overwite the MegaLock.dll to the LGFlashTool directory)

    Tutorial on how to use LG Flash Tool
    http://xdaforums.com/showthread.php?t=2475045
    Chinese: http://pan.baidu.com/s/1gd7R6Jh



    !!! BACK UP all your data from /sdcard partition, LG Flash tool will erase /sdcard even though only flash a boot image. While other partitions are safe.




    All TOT files are stored in google drive, click the link and then press CTRL + S to download the rar file



    KR F350S 32GB
    1) Flash f350s_root_kernel.TOT
    https://drive.google.com/file/d/0BxC_n8Lmue8vNDNuQkJrTTRDTDQ/edit?usp=sharing

    2) root it by IOroot 2.4 (please refer to #1 of this post)

    3) Once rooted, you can flash back the S stock kernel

    For f350s stock v10e
    https://drive.google.com/file/d/0BxC_n8Lmue8vUHpmd0hja0t5ZTA/edit?usp=sharing
    or
    For f350s stock v10g
    https://drive.google.com/file/d/0BxC_n8Lmue8vZC1HTkVlRG9fWEU/edit?usp=sharing


    In case of any issue, you can flash back to fully stock rom image

    v10e
    http://optimusforums.com/threads/g-pro-2-f350s-v10e-tot.11712/

    v10g
    http://bbs.gfan.com/android-7376941-1-1.html

    Good Luck


    Edit 2:
    HK D838 32GB
    d838_root_kernel
    https://drive.google.com/file/d/0BxC_n8Lmue8vck8yQ1A1YW1XNjg/edit?usp=sharing
    d838_v10a_kernel
    https://drive.google.com/file/d/0BxC_n8Lmue8vcUQxUXVZb3hQN1k/edit?usp=sharing
    d838_v10b_kernel
    https://drive.google.com/file/d/0BxC_n8Lmue8vd29jcDBacHMwTVk/edit?usp=sharing

    KR F350K 32GB
    f350k_root_kernel_v10e
    https://drive.google.com/file/d/0BxC_n8Lmue8vdXJOWjFZUjVlVkk/edit?usp=sharing
    f350k_kernel_v10h
    https://drive.google.com/file/d/0BxC_n8Lmue8vTmdQMU9vbFRLcDA/edit?usp=sharing
    View
    1
    M
    magicbbird
    Success!! using manual method, though.
    Thanks
    View

New posts