[N8000][ROM 4.4.2 Samsung offcial not final] So I herd u lieke kitekats?

Search This thread

clsaison4

Member
Apr 25, 2014
19
5
Some screenshots for you ;)
 

Attachments

  • Screenshot_2014-04-26-16-35-08.jpg
    Screenshot_2014-04-26-16-35-08.jpg
    71.8 KB · Views: 991
  • Screenshot_2014-04-26-17-01-42.jpg
    Screenshot_2014-04-26-17-01-42.jpg
    115.2 KB · Views: 948
  • Screenshot_2014-04-26-17-05-12.jpg
    Screenshot_2014-04-26-17-05-12.jpg
    126 KB · Views: 938
  • Screenshot_2014-04-26-17-06-46.jpg
    Screenshot_2014-04-26-17-06-46.jpg
    87.7 KB · Views: 949
  • Screenshot_2014-04-26-17-07-04.jpg
    Screenshot_2014-04-26-17-07-04.jpg
    97.9 KB · Views: 941
  • Screenshot_2014-04-26-17-09-17.png
    Screenshot_2014-04-26-17-09-17.png
    82.2 KB · Views: 853
  • Screenshot_2014-04-26-17-11-13.png
    Screenshot_2014-04-26-17-11-13.png
    250.8 KB · Views: 872

Eric-Mod

Senior Member
Jun 26, 2012
782
678
Austria
+1

By the way, would be pretty nice if someone could make an compatibility pack for the WiFi versions, like in the Android Revolution Thread. :)

Gesendet von meinem GT-N8000 mit Tapatalk
 

Faryaab

Senior Member
Jun 11, 2009
2,987
14,207
London, UK
I have re-packaged the fw, so it's much easier for you guys to download and flash. Big thanks to Izap for the leak! :D

Model: GT-N8000
Country: Open Europe
Version: Android 4.4.2
Changelist: 1430589
Build date: Wed, 23 Apr 2014 03:09:45 +0000
Product Code: OXA
PDA: N8000XXUDND5
CSC: N8000OXADND5
MODEM: N8000XXUDND2
Download: N8000XXUDND5_N8000OXADND5_N8000XXUDND2_OXA.zip

INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart tablet in download mode (Press and hold Power + Volume down button)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_N8000XXUDND5.tar.md5 to AP
- Add BL_N8000XXUDND5.tar.md5 to BL
- Add MODEM_N8000XXUDND2.tar.md5 to CP
- Add CSC_OXA_N8000OXADND5.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Press and hold Power + Volume up button)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
 

Eric-Mod

Senior Member
Jun 26, 2012
782
678
Austria
Of course there is, just tap a few times on 'Build number' under 'About Tablet'.

Gesendet von meinem GT-I9505 mit Tapatalk
 

koxminator

Member
Jan 19, 2008
30
7
First: thx for this ROM!
Second: I have some questions, thanks in advance:

1. is there any other CSC file for it, or can I use a CSC from a previous 4.1.2 Rom?
2. what is process if I coming from a CM10.3 ROM with TWRP 6.0.3.1?
 

diggedy

Senior Member
Feb 1, 2009
387
71
Durham
I upgraded my tablet and I'll give you my first impressions.

Multi-window function that allowed me to have several windows applications (and not a screen split in two) has disappeared, and I think it's a shame to have removed this feature. Moreover, the tablet has become much slower, but this may be because it is not a final version. There are no Air-Command and no major visual changes, I expected to see the interface of the Galaxy Note 10.1 2014

Apart from that, I think the rest is pretty good, I can now see emojis on Twitter :)

Are you saying that all multi window functionality is gone or can you still have 2 windows open together?
 

mobile-freak

Senior Member
Oct 16, 2010
202
23
Smart Watches
Hello everybody

the new leak looks very nice. But i want to ask you how S Note works.
Could someone make a view screenshots from S Note, it is the most important part for me :D
 

YOSEFE

Senior Member
Sep 12, 2006
1,541
117
UK
I have re-packaged the fw, so it's much easier for you guys to download and flash. Big thanks to Izap for the leak! :D

Model: GT-N8000
Country: Open Europe
Version: Android 4.4.2
Changelist: 1430589
Build date: Wed, 23 Apr 2014 03:09:45 +0000
Product Code: OXA
PDA: N8000XXUDND5
CSC: N8000OXADND5
MODEM: N8000XXUDND2
Download: N8000XXUDND5_N8000OXADND5_N8000XXUDND2_OXA.zip

INSTRUCTIONS
- Extract (unzip) the firmware file
- Download Odin3 v3.09 (From here or here)
- Extract Odin .ZIP file
- Open Odin3 v3.09
- Restart tablet in download mode (Press and hold Power + Volume down button)
- Connect phone and wait until you get a blue sign in Odin
- Add AP_N8000XXUDND5.tar.md5 to AP
- Add BL_N8000XXUDND5.tar.md5 to BL
- Add MODEM_N8000XXUDND2.tar.md5 to CP
- Add CSC_OXA_N8000OXADND5.tar.md5 to CSC
- Make sure re-partition is NOT ticked
- Click start button, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Press and hold Power + Volume up button)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!

Thanks for coming to the rescue mate.

Could you show us how to disable the phone bit for our wifi version of 8010?
 

Top Liked Posts

  • There are no posts matching your filters.
  • 52
    I tihnk you know what to do with those :

    Code:
    PIT if you **** something up :
    NOTE.pit
    [url]http://www50.zippyshare.com/v/47648425/file.html[/url]
    
    BL :
    [B]BL_N8000XXUDND5.tar[/B]
    [url]http://www13.zippyshare.com/v/45313724/file.html[/url]
    
    MODEM :
    [B]MODEM_N8000XXUDND2.tar[/B]
    [url]http://www64.zippyshare.com/v/59505193/file.html[/url]
    
    CSC : 
    [B]CSC_OXA_N8000OXADND5.tar : [/B]
    CSC_OXA_N8000OXADND5.zip
    [url]http://www67.zippyshare.com/v/82582924/file.html[/url]
    CSC_OXA_N8000OXADND5.z01
    [url]http://www48.zippyshare.com/v/56875063/file.html[/url]
    CSC_OXA_N8000OXADND5.z02
    [url]http://www39.zippyshare.com/v/97261232/file.html[/url]
    
    AP:
    [B]AP_N8000XXUDND5.tar [/B]: 
    AP_N8000XXUDND5.zip
    [url]http://www57.zippyshare.com/v/73873394/file.html[/url]
    AP_N8000XXUDND5.z01
    [url]http://www3.zippyshare.com/v/46722430/file.html[/url]
    AP_N8000XXUDND5.z02
    [url]http://www30.zippyshare.com/v/47884001/file.html[/url]
    AP_N8000XXUDND5.z03
    [url]http://www32.zippyshare.com/v/39571794/file.html[/url]
    AP_N8000XXUDND5.z04
    [url]http://www65.zippyshare.com/v/21536434/file.html[/url]
    AP_N8000XXUDND5.z05
    [url]http://www69.zippyshare.com/v/78725952/file.html[/url]
    AP_N8000XXUDND5.z06
    [url]http://www35.zippyshare.com/v/63192076/file.html[/url]



    Total size is 1.7 GB

    cd693fa332ba726865f2a4c9deb8bcf8 *AP_N8000XXUDND5.z01
    7bb5c3d04a78ce33a25d290e9e94449f *AP_N8000XXUDND5.z02
    930b5e9b9967ce8bbe86636300306a11 *AP_N8000XXUDND5.z03
    efed7941769df605fbe6688c90ab81ba *AP_N8000XXUDND5.z04
    cc5e7392fd478c5ef5f323ec51670abc *AP_N8000XXUDND5.z05
    84717273ef520fd5c0ca75a606744bf9 *AP_N8000XXUDND5.z06
    e125605342807fe474903fef7ca9c873 *AP_N8000XXUDND5.zip
    806c518c6e1ceb508c469f7a607dd753 *BL_N8000XXUDND5.tar
    e88023c8350a74bb78ba6412aa8f71bb *CSC_OXA_N8000OXADND5.z01
    1b7a5a5c93508c3b8ba5e5c094ba0307 *CSC_OXA_N8000OXADND5.z02
    ab7450381eef3797c009c264081d9d78 *CSC_OXA_N8000OXADND5.zip
    09c4f509d471d857f292c603d147ffe1 *MODEM_N8000XXUDND2.tar
    15
    I have re-packaged the fw, so it's much easier for you guys to download and flash. Big thanks to Izap for the leak! :D

    Model: GT-N8000
    Country: Open Europe
    Version: Android 4.4.2
    Changelist: 1430589
    Build date: Wed, 23 Apr 2014 03:09:45 +0000
    Product Code: OXA
    PDA: N8000XXUDND5
    CSC: N8000OXADND5
    MODEM: N8000XXUDND2
    Download: N8000XXUDND5_N8000OXADND5_N8000XXUDND2_OXA.zip

    INSTRUCTIONS
    - Extract (unzip) the firmware file
    - Download Odin3 v3.09 (From here or here)
    - Extract Odin .ZIP file
    - Open Odin3 v3.09
    - Restart tablet in download mode (Press and hold Power + Volume down button)
    - Connect phone and wait until you get a blue sign in Odin
    - Add AP_N8000XXUDND5.tar.md5 to AP
    - Add BL_N8000XXUDND5.tar.md5 to BL
    - Add MODEM_N8000XXUDND2.tar.md5 to CP
    - Add CSC_OXA_N8000OXADND5.tar.md5 to CSC
    - Make sure re-partition is NOT ticked
    - Click start button, sit back and wait a few minutes.
    - If you encounter any issues with the firmware (Any FC, Bootloop etc)
    - Boot into recovery mode (Press and hold Power + Volume up button)
    - Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
    - Then choose reboot and you should be good to go!
    10
    Finished.

    Also I think this CAN work on 8010, you just flash without MODEM part.
    Try at your risk tho.

    i will believe it when i see if, nothing anywhere about any kitkat leaks, no explanation from OP where it came from... very suspect.
    Because you totaly cant check someones thread history and thanks meters
    10
    Thank you. Works perfect for me!
    9
    Hey guys I found something pretty cool! (Only Root)

    Download an build.prop editor from the play store or sth like that and change the following lines to :

    "ro.product.name=viennaltexx" and "ro.product.device=viennalte"
    "ro.product.model=SM-P905"

    This will activate some hidden function. You'll get the Note PRO recent apps and notification toggle icons!