Remove All Ads from XDA

Setup 3G Dongle on TF101 with PPP Widget on KatKiss-KitKat #023c

2 posts
Thanks Meter: 1
By GioRosso, Junior Member on 24th April 2014, 10:57 PM
Post Reply Email Thread
Hello everyone,

I had a lot of problems setting up my Huawei E173 3G USB Dongle with TF101 on newly installed KatKiss-KitKat #023c ROM, so after finally getting it to work, here are some tips that might help the others.

# First of all, dock battery should be over 25% [ whether it makes sense or worked better for me ]

# Unlike default system (4.0.3 if I remember well), this ROM will not auto-detect/mount your USB device

# WIFI shloud be OFF

These are my PPP Widget settings

Access Point Name [required] - mine was (check with your carrier/provider)
Check and set PIN [required] - enter your PIN - BHMobile default is "0000"

Use WiFi to show PPP connection status : ON
Disable USC Device sleep : ON

Automatic device detection : ON
Manual port selection : ON [important]
Modem port - enter "ttyUSB0" --- do not use another USB at te same time!

Notify system about network access : ON
Enable logging : ON

Turn your Android OFF now (rebooting does not work).
Go to PPP Widget screen. Press green PPP widget icon.
Widget should be waking your device up... Connect button available soon.
Do not get discouraged if you do not connect from the first attempt.
Keep trying - it really works! I will try to upload some screenshots later.

Hope it helps!
The Following User Says Thank You to GioRosso For This Useful Post: [ View ] Gift GioRosso Ad-Free
6th May 2014, 04:36 AM |#2  
Magissia's Avatar
Senior Member
Thanks Meter: 260
By turn your Android off, you mean the device? We are supposed to turn off and turn on instead of using Android 's re boot?

Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes