Hi ! Could you please do the same for XT925 ?
doesn't the 4.4 ROM need to be compatible with the new boot loader?
adb reboot bootloader
fastboot flash recovery CWM6049-RAZR-HD_M-KITKAT.imgYou need to plug phone into computer and run those 2 commands adb and fastboot. Do you have java installed on your pc? If not you can download it or download a adb fastboot package... Google it. Its a little involved. I'm sure there is a thread
Sent from my DROID RAZR HD using Tapatalk
---------- Post added at 05:16 AM ---------- Previous post was at 05:11 AM ----------
@sheep348
you already have adb and fastboot, its in the razr utility dir you used yesterday to flash.
edit- install java on your pc as previously stated, i didnt know this was needed but already had it installed. (im still not positive this is actually needed)
1. go to settings/about phone and tap the "build number" repeatedly until it says you are a developer
2. back up 1 screen and there will be a new menu called "developer options". inside @ the top turn it on and agree to the prompt, then scroll down and turn on "usb debugging".
3. some new drivers may install if you already plugged into your pc, wait until there done before proceeding. also in later steps new drivers may install, always wait until they are done before proceeding.
4. put this zip on your sd card http://www.mediafire.com/download/xfpb67cja347yat/UPDATE-SuperSU-v1.99.zip (or the current version of su zip)
5. go to the razr utility dir and open the dir only, dont start the utility.
6. hold shift then right click (not over a file) and choose "open command prompt here"
7. type in the command prompt, adb devices
there should be a string of numbers or some sort of text identifying your phone. if nothing is displayed or it says no device found, you have done one of the previous steps wrong or dont have the current moto drivers installed.
if it says "unauthorized" next to the numbers, there will be a promp on the phone, click ok on the prompt and repeat the devices command and you should be all set.
assuming it showed your phone, proceed.
8. now type in, adb reboot bootloader
your phone should automatically reboot to the ap fastboot screen you were using yesterday. (watch for new drivers to install and wait if needed)
9. now type in, fastboot flash recovery xt926-KK-CWM-6048.img
it should only take a few seconds, then report complete. it sends the file, then writes it. make sure its done before proceeding.
10. unplug the usb cable then tap the power button to shut the phone off.
now hold both vol buttons and power to get back to the pre boot menu and choose "recovery". within a few seconds the new cwm recovery should display. if it doesnt (it took me a few tries for some reason) repeat step 10 until it does.
11. assuming you got in, use the vol keys to navigate and the power key to choose. choose install zip then choose zip from storage/sdcard1 then navigate to the "update-super-su zip" and choose it, navigate/click yes to install.
12. when complete, navigate and select "go back" as many times as needed until you see an option to reboot phone and select it.
likely it will prompt you to answer 1 or2 questions because this is a new install, answer yes to both and it should reboot.
13. Profit
if anything doesnt work as i explained, start over, it took me 2/3 tries and i almost know what im doing lol
