Heii this is a DatabaseCollectionThread for
JustArchi's Kitchen
If you get this message while building your PROJECT folder:
"This model does not yet exist in our database. Please fill your kernel path manually"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p5"
"Example for N9005/hlte (Samsung Note 3): /dev/block/mmcblk0p14"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/boot"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Kernel path for your device: "
or
"This model does not yet exist in our database. Please fill your modem path manually"
"Please notice that some models are not supporting flashing a modem via recovery, in such case you should use generic 'NULL' word in this question"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p7"
"Example for N9005/hlte (Samsung Note 3): NULL"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/modem"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Modem path for your device: "
you're on the right place!!!
JustArchi's Kitchen
If you get this message while building your PROJECT folder:
"This model does not yet exist in our database. Please fill your kernel path manually"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p5"
"Example for N9005/hlte (Samsung Note 3): /dev/block/mmcblk0p14"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/boot"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Kernel path for your device: "
or
"This model does not yet exist in our database. Please fill your modem path manually"
"Please notice that some models are not supporting flashing a modem via recovery, in such case you should use generic 'NULL' word in this question"
"Example for I9300/m0 (Samsung Galaxy S3): /dev/block/mmcblk0p7"
"Example for N9005/hlte (Samsung Note 3): NULL"
"Example for E960/mako (LG Nexus 4): /dev/block/platform/msm_sdcc.1/by-name/modem"
"MAKE SURE THAT THE PATH IS CORRECT, OVERWRITING WRONG PATHS MAY LEAD TO SOFT AND HARD BRICKS"
"Modem path for your device: "
you're on the right place!!!
Last edited: