FORUMS
Remove All Ads from XDA

Micromax Unite 2 - Read Back Guide[Easy way]

1,227 posts
Thanks Meter: 2,569
 
By Sudeep Duhoon, Recognized Contributor on 14th June 2014, 02:49 PM
Post Reply Email Thread
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.

Problem in installation?? Go here

2. Download scatter from here .

3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)

4. Click 'Add' and tap on added read back entry.

5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.

6. Click on read back and connect phone without battery. Wait till it completes.

7. Once you see a green circle, close sp flash tools and switch on the phone.

8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.

9. Go back and enter developers options(in settings), and check usb debugging on.

10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)

11. In mtk droid tools, click 'root, backup and recovery' tab.

12. Click 'To process file ROM_ from Flash Tool.

13. Locate the file you got from read back.

14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.

15. Now wait again.

Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.
Attached Files
File Type: txt MT6582_Android_scatter.txt - [Click for QR Code] (7.4 KB, 26039 views)
The Following 20 Users Say Thank You to Sudeep Duhoon For This Useful Post: [ View ] Gift Sudeep Duhoon Ad-Free
 
 
14th June 2014, 03:20 PM |#2  
Member
Thanks Meter: 8
 
More
Quote:
Originally Posted by Sudeep Duhoon

Procedure:
1. Download and install MTK VCOM drivers.
Problem in installation?? Go here

2. Open SP flash tools and go to read back tab. (alternative download link of sp flash tools)

3. Click 'Add' and tap on added read back entry.

4. Select any path to save file and click ok, write 0x3E180000 in length and click ok.

5. Click on read back and connect phone without battery. Wait till it completes.

6. Once you see a green circle, close sp flash tools and switch on the phone.

7. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.

8. Go back and enter developers options(in settings), and check usb debugging on.

9. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)

10. In mtk droid tools, click 'root, backup and recovery' tab.

11. Click 'To process file ROM_ from Flash Tool.

12. Locate the file you got from read back.

13. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.

14. Now wait again.

Once done, you will get your sp flashable backup in MTK Driod Tools/backup.

Read back complete.

Now follow this guide to root your Unite 2.

1) we have to load scatter file first right?
2) how huch time it takes to readback?
The Following User Says Thank You to codergenius For This Useful Post: [ View ] Gift codergenius Ad-Free
14th June 2014, 05:04 PM |#3  
Sudeep Duhoon's Avatar
OP Recognized Contributor
Flag Delhi
Thanks Meter: 2,569
 
Donate to Me
More
Quote:
Originally Posted by codergenius

1) we have to load scatter file first right?
2) how huch time it takes to readback?

Oops, sry. That was added from day one in my pc so forgot.
Added scatter now.
About 5 mins.
15th June 2014, 02:56 PM |#4  
Member
Thanks Meter: 8
 
More
anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.c pp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed
21st June 2014, 04:48 PM |#5  
Junior Member
Flag Dimapur
Thanks Meter: 2
 
Donate to Me
More
green circle
[QUOTE=Sudeep Duhoon;53395446]Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.

Problem in installation?? Go here

2. Download scatter from here .

3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)

4. Click 'Add' and tap on added read back entry.

5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.

6. Click on read back and connect phone without battery. Wait till it completes.

7. Once you see a green circle, close sp flash tools and switch on the phone.

8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.

9. Go back and enter developers options(in settings), and check usb debugging on.

10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)

11. In mtk droid tools, click 'root, backup and recovery' tab.

12. Click 'To process file ROM_ from Flash Tool.

13. Locate the file you got from read back.

14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.

15. Now wait again.

Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.
23rd June 2014, 03:24 PM |#6  
Junior Member
Thanks Meter: 2
 
More
Green circle
Zao, it worked for me after putting in the battery. The flash_tools hanged for a minute then automatically started backing up.

Regards,
Abhishek
The Following User Says Thank You to abhishek01 For This Useful Post: [ View ] Gift abhishek01 Ad-Free
26th June 2014, 03:33 PM |#7  
Senior Member
Thanks Meter: 149
 
Donate to Me
More
MTK specific apps
Hi,

Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS

Thanks in advance.

Or can you provide me the link to download KitKat rom
The Following User Says Thank You to eagledipesh For This Useful Post: [ View ] Gift eagledipesh Ad-Free
28th June 2014, 11:17 AM |#8  
Junior Member
Flag Lucknow
Thanks Meter: 0
 
More
Quote:
Originally Posted by Sudeep Duhoon

Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.

Problem in installation?? Go here

2. Download scatter from here .

3. Open SP flash tools, load scatter in sp flash tools and go to read back tab. (alternative download link of sp flash tools)

4. Click 'Add' and tap on added read back entry.

5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.

6. Click on read back and connect phone without battery. Wait till it completes.

7. Once you see a green circle, close sp flash tools and switch on the phone.

8. When the phone is on, connect it to pc. See if any notification of 'usb debugging' comes in phone, if not, go to settings->about phone->and tap build number 7 times to enable debugging options.

9. Go back and enter developers options(in settings), and check usb debugging on.

10. Now run mtk driod tools and it will detect phone. (alternative download link of mtk droid tools)

11. In mtk droid tools, click 'root, backup and recovery' tab.

12. Click 'To process file ROM_ from Flash Tool.

13. Locate the file you got from read back.

14. Say no to make CWM recovery automatically and cancel to choose a recovery for similar phone.

15. Now wait again.

Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.

i am facing some problem with preloader.....please guide me through.........
2nd July 2014, 03:48 AM |#9  
Sudeep Duhoon's Avatar
OP Recognized Contributor
Flag Delhi
Thanks Meter: 2,569
 
Donate to Me
More
Quote:
Originally Posted by kanishka singh

i am facing some problem with preloader.....please guide me through.........

What problem? Explain a bit.





Quote:
Originally Posted by eagledipesh

Hi,

Can you confirm if the rom is 4.4.2.
If it is 4.4.2 ROM, then can you please extract and provide the mtk specific apks from /system/app,
ie;
EngineerMode,
EngineerCode
EngineerModeSIM
Mkt_boot
MTKAndroidSuiteDeamon
MTkBT
MTKLogger
MTKThermalManager
YGPS

Thanks in advance.

Or can you provide me the link to download KitKat rom

Here is the stock rom. Yes it is kitkat.

http://support.moulnisky.com/index.php?dir=Micromax/




[QUOTE=zao.remy;53573770]
Quote:
Originally Posted by Sudeep Duhoon

Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.........................Once done, you will get your sp flashable backup in MTK Driod Tools/backup.
Read back complete.
Now follow this guide to root your Unite 2.[/
What do you mean by green circle? I can't see except that stop button, which is already green.

A pop up will come when it will finish. On center of the sp flash tools.


Quote:
Originally Posted by codergenius

anyone using win 7 pro 64 bit : able to install vcom drivers & successfully rooted unite 2 (i am unable to readback using sp flash tools...getting error as "USBSetting::SearchUSBPortPool(): Scaning USB port failed!(..\QT_FlashTool_Refactor\Conn\USBSetting.c pp,195)" in QT_FLASH_TOOL.log and error "IsValidCOMPort(): Instance ID(USB\VID_8086&PID_0189\6&1279F1F3&0&5) (FlashToolLib/host/windows/com_enum.cpp:942)" in BROM_DLL_V5.log while read back, i am not sure if it is driver issue as preloader driver gets successfully installed

Try using usb deview to uninstall and reinstall the drivers or try changing the com port from sp flash tools itself or try any other pc.
7th July 2014, 01:51 PM |#10  
Senior Member
Flag mumbai
Thanks Meter: 71
 
More
Question
i did it before rooting my phone...the process still remains the same...????
8th July 2014, 05:12 PM |#11  
Sudeep Duhoon's Avatar
OP Recognized Contributor
Flag Delhi
Thanks Meter: 2,569
 
Donate to Me
More
Quote:
Originally Posted by bladehunter

i did it before rooting my phone...the process still remains the same...????

Yes
The Following User Says Thank You to Sudeep Duhoon For This Useful Post: [ View ] Gift Sudeep Duhoon Ad-Free
Post Reply Subscribe to Thread

Tags
back, micromax, mtk, read, unite, unite-2

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes